Residual stresses and transformation toughening in MoSi2 composites reinforced with partially stabilized zirconia

The results of study of the effects of yttria stabilization (0–6 mol.%) on the room-temperature fracture behavior and toughening mechanisms in zirconia-reinforced MoSi₂ are presented in this paper. Transformation toughening is shown to occur only in composites reinforced with zirconia particles stabilized with 2 mol.% yttria. However, the fracture toughness levels are comparable in the other composites with yttria levels between 0 and 6 mol.%. Toughening in the other composites is attributed to the combined effects of residual stress, microcrack shielding/anti-shielding and/or crack deflection. A rigorous micromechanics-based model is presented for the estimation of residual stress levels in brittle materials reinforced with phases that can transform during cooling or under stress. The model is applied successfully to the rationalization of the observed fracture and toughening phenomena.     

Expression studies of delta-globin gene alleles associated with reduced hemoglobin A2 levels in Greek Cypriots

We previously identified five delta-globin gene alleles associated with reduced hemoglobin (Hb) A2 (Trifillis, P., Ioannou, P., Schwartz, E., and Surrey, S. (1991) Blood 78, 3298-3305). We have now evaluated functional consequences of the changes after expression in COS-1 cells to monitor effects on RNA splicing. In addition, variant Hb A2 tetramers were expressed in yeast to assess effects of amino acid changes on oxygen binding and stability to heat and mechanical agitation. The G --> T change at codon 27 and the A --> G change in IVS-2 both affect RNA splicing, whereas the C --> T change at codon 97 and the AT deletion in IVS-2 have no effect. Oxygen equilibrium curves of the Hb A2 variants expressed in yeast were similar to that of wild type Hb A2. None of the three variant Hb A2 tetramers (Thr --> Ile at codon 4 (Hb deltaT4I), Ala --> Ser at codon 27 (Hb deltaA27S), and Arg --> Cys at codon 116 (Hb deltaR116C)) showed decreased heat stability compared with Hb A2, whereas the Hb deltaT4I variant showed highest instability to mechanical agitation. Co-expression in yeast of alpha-globin chain and the delta-chain variant containing a Leu --> Pro change at codon 141 yielded no identifiable tetramers, suggesting lack of assembly or severe tetramer instability. These studies show the probable cause for decreased Hb A2 for two alleles is due to defective splicing, whereas decreased protein stability, increased tetramer association with red cell membranes, increased interdisulfide bond formation of delta-chains, which inhibits assembly with alpha-chains, and/or reduced assembly is suggested for the other three alleles.     

Solidification Behavior of Undercooled Liquid Aluminum Oxide

Solidification of aluminum oxide from undercooled melts was investigated in containerless experiments. Specimens were levitated in a gas jet, stabilized with an acoustic positioning device, and melted with cw CO₂ laser beams. Cooling curves were obtained by optical pyrometry when the laser intensity was reduced. The materials examined were high-purity Verneuil sapphire, 99.5% polycrystalline alumina, and oxide materials recovered from the effluent of an aluminum-fueled rocket motor. The degree of undercooling, the apparent temperature behavior during the thermal arrest on solidification, and the structure of the materials formed were different in argon and oxygen atmospheres. Undercooling of the sapphire and alumina materials was 360 ± 10 K in an oxygen atmosphere and approximately 450 K in argon. Melting and solidification of high-purity sapphire resulted in a dendritic and porous polycrystalline material in oxygen. Dense, larger crystals were obtained in argon. Products formed from 99.5% alumina were discolored and the cores were white, indicating impurity segregation effects. More reproducible behavior was observed for the sapphire and 99.5% alumina than for the tungstencontaminated rocket motor effluent materials.     

线卡通信系统的基本构件

如今高性能通信系统有多种形式，在企业网络中，它也许是路由器，或是将以太局域网(LAN)的数据转发至OC-48 SONET光网络的多业务转换装置；在蜂窝网络中，它可能是第三代宽带无线网络控制器(RNC)，将基站(BTS)的移动蜂窝电话呼叫发送至公共交换电话网(PSTN)；在存储网络中，它可以是将服务器的数据备份至廉价磁盘冗余阵列(RAID)的光纤通道存储转换器。无论何种特殊类型的网络，这些系统的共同用途是接收来自信息源的数据，决定它需要发至何处，并有效地将它传送至目的地。为了支持这些关键功能，需要有一套通用通信元件或“基本构…     

A Low-Power Wide-Dynamic-Range Analog VLSI Cochlea

Low-power wide-dynamic-range systems are extremely hard to build. The biological cochlea is one of the most awesome examples of such a system: It can sense sounds over 12 orders of magnitude in intensity, with an estimated power dissipation of only a few tens of microwatts. In this paper, we describe an analog electronic cochlea that processes sounds over 6 orders of magnitude in intensity, and that dissipates 0.5 mW. This 117-stage, 100 Hz to 10 KHz cochlea has the widest dynamic range of any artificial cochlea built to date. The wide dynamic range is attained through the use of a wide-linear-range transconductance amplifier, of a low-noise filter topology, of dynamic gain control (AGC) at each cochlear stage, and of an architecture that we refer to as overlapping cochlear cascades. The operation of the cochlea is made robust through the use of automatic offset-compensation circuitry. A BiCMOS circuit approach helps us to attain nearly scale-invariant behavior and good matching at all frequencies. The synthesis and analysis of our artificial cochlea yields insight into why the human cochlea uses an active traveling-wave mechanism to sense sounds, instead of using bandpass filters. The low power, wide dynamic range, and biological realism make our cochlea well suited as a front end for cochlear implants.     

Toward a narra-topography: A pilot study applied to Marguerite Duras' novelModerato Cantabile

Although lexical frequencies are familiar measures of stylistic and thematic analysis, only recently have some stylostatisticians been tempted to investigate the relationship between the frequency and topography of repeated lexical items. In the present paper the authors have turned to the study of the four focal types of discursive narratology, using Marguerite Duras'Moderato Cantabile. Their intent is to uncover aspects of narratological performance which further elucidate the communicative strategies in the story. Part 1 summarizes the problematic between frequency and topography. It describes how a topographical index can be computed for any repeated item and how a Global Topography Index (GTI) can summarize the major topographical characteristics of any text sequence. Part 2 presents a four-cell typology of narrational mode: a segmentation of the verbal chain into narrating and narrated speech acts, with each text sequence tagged according to its discursive function: overt sender intervention for story coherence or comment on the focal level of a narrating present; representation of discrete or unlocalized events on the focal level of a mimeticized past. In Part 3 the focal encodings are displayed in numerical and graphic form, first according to the eight surface chapter divisions and then according to twenty-six subsets of approximately equal length. The fluctuations of the topography indices are reviewed, with particular attention being paid to the manifestation of cluster effects. Although sender interventions predominate, the relativized behavior of each focal type contributes to a climactic unraveling of the intrigue in the final chapters. In conclusion, the authors stress the dichotomy between the calm surface of the chapters and the agitated tensions of the twenty-six subsets.     

Adverse environmental conditions in the respiratory and medical ICU settings

Sleep deprivation and fragmentation occurring in the hospital setting may have a negative impact on the respiratory system by decreasing respiratory muscle function and ventilatory response to CO2. Sleep deprivation in a patient with respiratory failure may, therefore, impair recovery and weaning from mechanical ventilation. We postulate that light, sound, and interruption levels in a weaning unit are major factors resulting in sleep disorders and possibly circadian rhythm disruption. As an initial test of this hypothesis, we sampled interruption levels and continuously monitored light and sound levels for a minimum of seven consecutive days in a medical ICU, a multiple bed respiratory care unit (RCU) room, a single-bed RCU room, and a private room. Light levels in all areas maintained a day-night rhythm, with peak levels dependent on window orientation and shading. Peak sound levels were extremely high in all areas representing values significantly higher than those recommended by the Environmental Protection Agency as acceptable for a hospital environment. The number of sound peaks greater than 80 decibels, which may result in sleep arousals, was especially high in the intensive and respiratory care areas, but did show a day-night rhythm in all settings. Patient interruptions tended to be erratic, leaving little time for condensed sleep. We conclude that the potential for environmentally induced sleep disruption is high in all areas, but especially high in the intensive and respiratory care areas where the negative consequences may be the most severe.     

Abrasion phenomena in twill tencel fabric

The abrasion characteristics of Tencel fabrics were evaluated by Martindale abrasion and laundering, and the breakdown mechanism of fibers was surveyed by scanning electron microscopy. The fabric was subjected to pad‐dry‐cure treatment with two different types of modified dimethyloldihydroxyethylene urea resins (Reaktant DH and Reaktant FC). Although the degree of dry abrasion varied with different resins, the damage exhibited by individual fibers differed little from untreated to resin‐treated; the major mechanism of abrasion was through friction, and the mechanism of fiber failure was multiple splitting and transverse cracking. In untreated Tencel, the characteristic feature of wet abrasion was massive fibrillation, and in crosslinked fabrics, the wet abrasion mechanism was through fiber slippage and slicing action, although in the Reaktant FC‐treated fabric, the wet abrasion mechanism was more through slicing than through fiber splitting. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1391–1398, 2006