Natural convection in an air-filled (Prandtl number = 0.7) porous cavity with profiled side cooling and constant bottom heating is investigated over the Rayleigh number range of 1×104 to 1×108 at two Darcy numbers: 1×10-4 and 1×10-6. The aspect ratio based on cavity height was varied from 0.5 to 0.1 to investigate penetration length according to linear or sinusoidal temperature profile. The general non-Darcy model adopted in this work was validated against experimental and theoretical results in the literature and Nusselt number was predicted within less than 3% in the worst case. The effect of left wall imposed temperature profile was investigated in detail. Different convective regimes were observed depending on the imposed profile. An active region was found to take place with the linear temperature profile and with extent proportional to Rayleigh number as predicted by scale analysis. 相似文献
We are interested in the modeling and control of a salt gradient solar pond (SGSP) in the south of Tunisia. We developed a model of a closed cycle salt gradient solar pond (CCSGSP) that ensures successful year round operation. This model was used to study the response of the solar pond (SP) to various control techniques. It takes into account heat and salt diffusion within the pond and simulates the transient behavior of a SGSP. Furthermore, we investigated the dynamic process, which involves internal gradient stability, boundary behavior between the gradient zone and the convective zones. We thus incorporated the double diffusive processes into the SP model by using the one dimensional stability criterion produced by linear theory. The governing differential equations are solved numerically by using a control-volume scheme.The results show that successful operation of a SP requires three things: the maintenance of the storage zone temperature through heat extraction and brine injection, the use of surface washing to control the deepening of the upper mixed layer and a well designed initial salt stratification to prevent the formation of instability within the gradient. Using linear salinity profile as an initial condition, three round year simulations were run using average meteorological data with the result that adequate stability (Rρ2 throughout the gradient and Rρ10 at the interfaces) was maintained. Numerical results show also that 10–30% efficiency could have been reached if heat extraction is performed routinely especially when one considers that the storage temperature is within 40–80 °C. The model is validated against data taken from the operation of the UTEP SP. Close correlation between computed and measured data was obtained. 相似文献
Organic wastes were successfully used as soil amendment to improve agrosystems productivity. Yet, the effectiveness of this practice to enhance plant antioxidant capacities has received little attention. Here, we assess the effect of municipal solid waste (MSW) compost (at 40 t ha(-1)) on growth, polyphenol contents and antioxidant activities of Mesembryanthemum edule. MSW compost application significantly increased the soil contents of carbon, nitrogen, calcium, phosphorus and potassium. This was associated with higher nutrient (N, P, and K) uptake, which likely led to the significant improvement of the plant biomass and relative growth rate (RGR) (+93% on average) as compared to the control. In the same way, the fertilizing effect of the added organic matter significantly enhanced the antioxidant potential M. edule, assessed by radical scavenging activity, iron reducing power and β-carotene bleaching capacity. This was associated with significantly higher antioxidant contents, mainly total phenols and flavonoids. Heavy metal (Pb, Cd, Cu, and Zn) concentrations were slightly increased upon compost application, but remained lower than phytotoxic values. Overall, our results point out that short-term MSW compost application at 40 t ha(-1) is efficient in enhancing the productivity together with the antioxidant potentiality of M. edule without any adverse environmental impact. 相似文献
A hybrid micro-electrostatic actuator is presented. The actuator integrates a vertical comb driving (VCD) unit and a parallel-plate driving (PPD) unit. The hybrid actuator is fabricated using a one structural layer microfabrication process, i.e., MetalMUMPs instead of a two-layer microfabrication process needed for traditional vertical comb-drive actuators by taking advantage of the residual stress gradient in the MetalMUMPs nickel layer, which raises the moving parts of the actuator above the substrate after release. The hybrid actuator significantly simplifies the fabrication process for vertical comb-drive actuators, i.e., turning a process requiring two structural layers into a process requiring only one structural layer and thus avoids any misalignment between the two layers. The hybrid actuator can generate larger force and then a larger displacement than the actuator having only the VCD with the same area since no extra space is needed for the PPD unit which uses the moving electrode existing in the VCD unit and a fixed electrode under the VCD unit. The VCD and PPD units in the hybrid actuator are subject to the same driving voltage and work together to pull the moving parts of the actuator downward. A model is established for the hybrid actuator to analyze its displacement. The analytical results show that displacement of the moving part of the hybrid actuator is about half of the gap between the electrodes of the PPD unit. Prototypes are fabricated and tested. With a driving voltage of 150 V, the hybrid actuator achieved a measured displacement of 6.48 µm. 相似文献
The realizability of Reynolds stress models in homogeneous turbulence is critically assessed from a theoretical standpoint. It is proven that a well known second-order closure model formulated using the strong realizability constraints of Schumann (1977) and Lumley (1978) is, in fact, not a realizable model. The problem arises from the failure to properly satisfy the necessary positive second time derivative constraint when a principal Reynolds stress vanishes-a flaw that becomes apparent when the nonanalytic terms in the model are made single-valued as required on physical grounds. More importantly, arguments are advanced which suggest that it is impossible to identically satisfy the strong from of realizability in any version of the present generation of second-order closures. On the other hand, models properly formulated to satisfy the weak form of realizability—wherein states of one or two component turbulence are made inaccessible in finite time via the imposition of a positive first derivative condition—are found to be realizable. However, unlike the simpler and more commonly used second-order closures, these models can be ill-behaved near the extreme limits of realizable turbulence due to the way that higher-degree nonlinearities are often unnecessarily introduced to satisfy realizability. Illustrative computations of homogeneous shear flow are presented to demonstrate these points which can have important implications for turbulence modeling. 相似文献
The ketosulfones are known to be reduced electrochemically, in weakly acidic medium with scission of the CS bond. Nevertheless, in strongly acidic media, the electroactive entity being the protonated form of the carbonyl group, the reaction may lead to pinacols. In the case of γ-ketosulfones, the electroreduction in very weakly protic media is followed by the loss of proton of the acidic substrate due to the effect of electrogenerated bases. This chemical cleavage of the CS bond yields to α-ethylenic ketones reducible at the electrolysis potentiel. On the other hand, for the long chained ketosulfones the reduction may occur through a partial intramolecular electron transfer. 相似文献
Cathodic reduction of several secondary and tertiary p-toluenesulfonamides and gem-N-disulfonamides were investigated by cyclic voltammetry and controlled potential electrolysis at mercury electrode in aprotic and protic dmf. In the cleavage of tertiary p-toluenesulfonamides two Faradays per mole were consummed, resulting in the formation of amine and the sulfinate ion. In the case of secondary p-toluenesulfonamides, electrochemically inactive sulfonamide anions
were formed at the electrode surface by acid–base reaction between acidic substrate and electrogenerated bases. Sulfonamides anions were obtained also in the solution bulk with adding strong base and by cathodic cleavage of gem-N-disulfonamides in aprotic media. General reduction mechanisms are postulated and structure effects on the scope of the reduction are discussed for more complex sulfonamides. 相似文献
In the future fifth generation networked society, devices will suffer from the asynchronous multi-carrier effect which impacts the user’s quality of experience. This paper investigates the timing misalignment effect on interference level in the context of a cognitive radio (CR) network. Our study considers both multicarrier techniques orthogonal frequency division multiplexing (OFDM) and filter bank multicarrier (FBMC). The originality of our paper consists in proposing a simple but accurate analytical model to evaluate our system’s performance in terms of interference level, signal-to-interference-plus-noise ratio and bit error rate. Specifically, two case studies are considered, a single-user case (one primary user and one secondary user) and a multi-user case with exact theoretical expressions of interference level. We had also made a comparison between OFDM and FBMC techniques. The most striking observation to emerge from our results is that the asynchronous interference is inversely propositional to timing offset even for the multi-user case, and that differences in the normalized interference level between the single/multi-user cases is barely perceived for the FBMC technique, proving its efficiency. Our simulations’ results had further strengthened our confidence in the suggested model. It shows that FBMC is best suited for CR networks since it provides BER improvements compared to OFDM.
Digital watermarking is the art of hiding information in a digital document in order to protect it. The inserted mark and the marked document can be an image, an audio or a video. In this article, we will present a comparative study between two variants of a digital audio watermarking technique operating in the frequency domain. In the first variant, the time-frequency mapping is performed by Modified Discrete Cosine Transform (MDCT). For the second variant, the time-frequency mapping is performed by the Discrete Cosine Transform (DCT). We will study the contribution of each transformation, point of view robustness against different types of attacks delivered by Stirmark audio, imperceptibility by using a statistical approach by calculating the SNR and an objective approach by calculating the ODG notes given by PEAQ and capacity of insertion. Finally, to highlight our results, we will compare the two variants of the proposed technique with some other existing techniques.
In this paper, we evaluate the performance of a novel cooperative adaptive relaying scheme called ISDF (Incremental Selective Decode and Forward). We compare the energy efficiency of this underlying scheme with direct transmission (DT), Fixed and adaptive relaying schemes in Wireless Sensor Network (WSN). The system is constrained by a minimum value of Signal-to- Noise Ratio (SNR) and the end-to-end throughput. We consider a three-node cooperative system. The relay is equidistant to the source and destination, and then we study different positions of the latter. The destination receives two copies of the message: one from the source and the other from the relay. Then it combines them by using maximal ratio combining (MRC). The proposed scheme differs from other schemes by the combination of the selective decode and forward scheme with the incremental scheme which requires the presence of a feed-back from the destination. The analysis reveals that the proposed ISDF provides good energy efficiency compared to DT and other cooperative schemes. It also shows that DF cooperative scheme (decode and forward , either with feedback or no, is outperformed by AF (amplify and forward) scheme especially when the relay is placed near the destination.