Conjugation of curcumin with PVP capped gold nanoparticles for improving bioavailability

Curcumin, a natural polyphenolic compound, has astounding therapeutic applications but lacks in bioavailability mainly due to its poor solubility in water. Polyvinyl pyrrolidone (PVP) which is a proven drug carrier has been used to facilitate the conjugation of curcumin with gold nanoparticles and to improve the solubility of curcumin in water. In this conjugate diaryl heptanoid chromophore group of curcumin which is a much needed group in biomedical applications remains intact as observed from FTIR and UV–vis spectroscopy analysis. The work shows good promise for such conjugates as therapeutic-cum-imaging materials in biomedical field.     

α-Alumina and spinel react into single-phase high-alumina spinel in <3 seconds during flash sintering

In situ X-ray diffraction measurements at the Advanced Photon Source show that α-Al₂O₃ and MgAl₂O₄ react nearly instantaneously and completely, and nearly completely to form single-phase high-alumina spinel during voltage-to-current type of flash sintering experiments. The initial sample was constituted from powders of α-Al₂O₃, MgAl₂O₄ spinel, and cubic 8 mol% Y₂O₃-stabilized ZrO₂ (8YSZ) mixed in equal volume fractions, the spinel to alumina molar ratio being 1:1.5. Specimen temperature was measured by thermal expansion of the platinum standard. These measurements correlated well with a black-body radiation model, using appropriate values for the emissivity of the constituents. Temperatures of 1600-1736°C were reached during the flash, which promoted the formation of alumina-rich spinel. In a second set of experiments, the flash was induced in a current-rate method where the current flowing through the specimen is controlled and increased at a constant rate. In these experiments, we observed the formation of two different compositions of spinel, MgO•3Al₂O₃ and MgO•1.5Al₂O₃, which evolved into a single composition of MgO•2.5Al₂O₃ as the current continued to increase. In summary, flash sintering is an expedient way to create single-phase, alumina-rich spinel.     

Viscous Potential Flow Analysis of Kelvin–Helmholtz Instability of a Cylindrical Flow with Heat and Mass Transfer

A linear analysis of Kelvin–Helmholtz instability of a cylindrical interface has been carried out when there is heat and mass transfer across the interface, using viscous potential flow theory. Both fluids are considered as incompressible, viscous, and thermally conducting with different kinematic viscosities. Both axisymmetric as well as asymmetric disturbances are considered. Stability criterion is given by a critical value of relative velocity and stability is discussed theoretically as well as numerically. Various graphs with respect to physical parameters such as wave number, viscosity ratio, heat transfer coefficients, Reynolds number, etc., have been drawn and the effect of various parameters have been described. A comparison with the linear stability analysis of inviscid fluids (Lee [10]) has been made and it is observed that viscosity has a stabilizing effect on the stability of the system. © 2013 Wiley Periodicals, Inc. Heat Trans Asian Res, 43(6): 489–503, 2014; Published online 3 October 2013 in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21092     

Oxidation Kinetics of an Amorphous Silicon Carbonitride Ceramic

The oxidation kinetics of amorphous silicon carbonitride (SiCN) was measured at 1350°C in ambient air. Two types of specimens were studied: one in the form of thin disks, the other as a powder. Both specimens contained open nanoscale porosity. The disk specimens exhibited weight gain that saturated exponentially with time, analogous to the oxidation behavior of reaction-bonded Si₃N₄. The saturation value of the weight gain increased linearly with specimen volume, suggesting the nanoscale pore surfaces oxidized uniformly throughout the specimen. This interpretation was confirmed by high-resolution electron microscopy and secondary ion mass spectroscopy. Experiments with the powders (having a particle size much larger than the scale of the nanopores) were also consistent with measurements of the disks. However, the powder specimens, having a high surface-to-volume ratio, continued to show measurable weight gain due to oxidation of the exterior surface. The wide range of values for the surface-to-volume ratio, which included all specimens, permitted a separation of the rate of oxidation of the free surface and the oxidation of the internal surfaces of the nanopores. Surface oxidation data were used to obtain the rate constant for parabolic growth of the oxidation scale. The values for the rate constant obtained for SiCN lay at the lower end of the spectrum of oxidation rates reported in the literature for several Si₃N₄ and SiC materials. Convergence in the behavior of SiCN and CVD-SiC is ascribed to the purity of both materials. Conversely, it is proposed that the high rates of oxidation of sintered polycrystalline silicon carbides and nitrides, as well as the high degree of variability of these rates, might be related to the impurities introduced by the sintering aids.     

Effects of SEBS-g-MA copolymer on non-isothermal crystallization kinetics of polypropylene

The non-isothermal crystallization kinetics of pure PP and PP/SEBS-g-MA blends up to volume fraction, Φ _d (0–0.50) was studied by differential scanning calorimetry at four different cooling rates. Crystallization parameters were analyzed by Ozawa and Liu models. The Ozawa model fits in the PP/SEBS-g-MA blends and indicates the effect of SEBS-g-MA copolymer on the crystallization process of polypropylene. Augis–Bennet model has been used to calculate activation energy, ?E, during non-isothermal crystallization process. The value of ?E decreased with SEBS-g-MA due to flexibility of SEBS-g-MA by which movements of chains of PP become easier.     

Additive Manufacturing of Ceramics Enabled by Flash Pyrolysis of Polymer Precursors with Nanoscale Layers

We show that a polymer‐based route to ceramics can be implemented into additive manufacturing by reducing the time for pyrolysis to about a second, which we call flash pyrolysis. Repetitive deposition of nanometer scale coatings of the ceramic, in this way, is employed to create defect‐free infiltrations of carbon fiber composites. The mechanical strength of the fibers is retained in the composite. Excellent wetting properties of the polymer precursor permits three‐dimensional, conformal coating through the three stages of infiltration: nanoscale coating of the single fibers, filling of interstitial spaces between the fibers, and a buildup of the coating over the entire composite. The flash pyrolysis method will enable a new genre of polymer‐derived ceramics made into net shape by this unusual method of additive manufacturing.     

The Change of X‐ray Diffraction Peak Width During in situ Conventional Sintering of Nanoscale Powders

Diffraction peaks of nanoscale particles of 3 mol% yttria‐stabilized zirconia become sharper as the powder sinters. The reduction in the peak width is correlated with the increase in density. The sharpening of the peak agrees reasonably well with the remaining free surface area as the sample sinters. Therefore, high curvature of the free surface of the pores is assumed to lead to peak broadening (the grain boundaries that grow at the expense of the free surfaces of the pores do not have this curvature). The change in the grain size during sintering does not make a significant contribution to peak width.     

Effect of CoFe2O4 mole percentage on multiferroic and magnetoelectric properties of Na0.5Bi0.5TiO3/CoFe2O4 particulate composites

Na_0.5Bi_0.5TiO₃ (NBT), CoFe₂O₄ (CFO) as well as particulate composites containing different mole percentages of NBT and CFO were synthesized by the solid-state sintering route and characterized for their ferroelectric and ferrimagnetic hysteresis loops, magnetostriction and magnetoelectric (ME) output. The mole% of CFO was found to influence the ferroelectric and ferrimagnetic hysteresis loops as well as magnetostriction and piezomagnetic coefficients which in turn had a significant effect on the magnetoelectric voltage coefficient. The highest magnetoelectric voltage coefficient (α) of 0.5 mV/cm/Oe was recorded in (65) NBT–(35) CFO composite.     

Cooperative adaptive sampling of random fields with partially known covariance

This paper considers autonomous robotic sensor networks taking measurements of a physical process for predictive purposes. The physical process is modeled as a spatiotemporal random field. The network objective is to take samples at locations that maximize the information content of the data. The combination of information‐based optimization and distributed control presents difficult technical challenges as standard measures of information are not distributed in nature. Moreover, the lack of prior knowledge on the statistical structure of the field can make the problem arbitrarily difficult. Assuming the mean of the field is an unknown linear combination of known functions and its covariance structure is determined by a function known up to an unknown parameter, we provide a novel distributed method for performing sequential optimal design by a network comprised static and mobile devices. We characterize the correctness of the proposed algorithm and examine in detail the time, communication, and space complexities required for its implementation. Copyright © 2011 John Wiley & Sons, Ltd.