Summary The modified indirect conductivities and oven-dry moisture percentages were determined on mine Samples of cooked cottonseed
meats (1.8 to 13.9% water). Statistical treatment of the data yields the following results: (1) equation of the regression
line, {fx177-1} (2) correlation coefficient, 0.998; (3) standard deviation from the regression line, 0.27% water.
Ten replicate determinations made on each of two samples containing 2.7 and 7.7% water showed standard deviations of 0.07
and 0.08% water.
These results show that the accuracy and precision of the modified indirect conductivity method are satisfactory for practical
applications. For a consecutive series of determinations the average time required per determination was about 9 min. This
time could be reduced to about 5 min. by using duplicate sets of stirring apparatus.
Describes data obtained in research conducted cooperatively by the Cotton Research Committee of Texas and the Texas Engineering
Experiment Station. 相似文献
A large number of studies have been devoted in recent years to the miscibility behavior of linear polyesters with chlorinated polymers, including poly(vinyl chloride) (PVC), chlorinated PVC, chlorinated poly(ethylenes), and copolymers of vinylidene chloride (Saran). However, similar studies with aromatic polyesters are lacking. It is the purpose of this paper to compare the properties of blends made of poly(ethylene terephthalate), poly(butylene terephthalate) or poly(hexamethylene terephthalate) and of various chlorinated polymers. It is shown that a high concentration of chlorine atoms is required to achieve miscibility. Moreover, there is a “miscibility window” in terms of the carbonyl concentration of polyesters, immiscibility being found for carbonyl concentrations outside this window, A similar behavior was observed before for linear polyester/chlorinated polymer blends and for polyester/polycarbonate blends. Solid state small-angle light scattering experiments were also conducted to follow the morphology of the blends as a function of composition. Spherulites were found but their size vary with composition. 相似文献
This research focuses on the effect of the geometry and patterns of the gas flow channel on the PEM fuel cell performance.
Simulation was conducted and the results were verified by experiments. Three-dimensional, single phase, compressible and isothermal
models of 5 cm2 electrodes, anode and cathode, were developed and studied by utilizing a commercial Computational Fluid Dynamics (CFD) software,
FLUENT 4.5. Two types of gas flow channel were investigated: conventional and interdigitated. The results showed that the
flow channel pattern does not have a significant effect on the anode cell performance, whereas it has a strong effect/influence
on the cathode cell performance. The interdigitated design provides a higher limiting current density and cell performance
than the conventional design on the cathode side. Moreover, the cell performance does not depend on the inlet and outlet channel
widths. On the contrary, for the interdigitated design, it was influenced by the shoulder width. Finally, experiments were
conducted to validate the simulation results. 相似文献
Ozone transfer to water or wastewater is necessary before desirable, effective ozone reactions occur. Several factors affect ozone transfer efficiency, including water quality characteristics, contactor configuration, and applied ozone characteristics. The design model presented in this paper addresses all factors affecting ozone transfer. The model was used to compare measured transfer efficiency with predicted transfer efficiency at four full-scale wastewater ozone disinfection facilities. A relatively good prediction was obtained at each plant.
The paper presents an example calculation of ozone transfer efficiency. Also, the effect of changes to some of the factors affecting transfer efficiency is presented, such as changes in diffuser depth, plant elevation, ozone concentration, water quality (i.e., ozone demand), pH, detention time, temperature, and acombination of factors. The design model may be used to evaluate the effect of changes in plant design on transfer efficiency, but cannot provide an absolute value for transfer efficiency until difficult-to-measure parameters, such as bubble diameter, are known. 相似文献
The thermal degradation of several polyimidazopyrrolone (pyrrone) films was studied in air and in vacuum over the range of 100–1000°C. by thermogravimetric analysis (TGA), with the use of both isothermal heating and programmed heating rates of 2, 3, 5, and 7.5°C./min. At pressures of 10?6 torr or less, maximum weight losses average 30% at 800°C. Rates of volatilization and activation energies were derived to provide comparison between these ladder-type polymers. Mass spectrometric analysis of the pyrolysis gases evolved under vacuum conditions showed that CO, CO2, and H2O were the primary volatile products and that they were formed throughout the period of weight loss. Approximate correlation between changes in weight and changes in the total pressure for the vacuum tests indicates that mass spectrometric results could provide quantitative as well as qualitative data. The importance of sample history prior to heating and of sample geometry in developing meaningful and reproducible TGA results is aptly demonstrated. The ability of these materials to absorb readily 5–7 wt.-% of water under ambient conditions and the effect of this property upon weight loss measurements are shown. 相似文献
The moldGeotrichum candidum produces an extracellular lipase, readily concentrated by removal of the culture medium in which the microorganism is grown.
The lipase is characterized by a unique, but not absolute, specificity for fatty acids containingcis-9 orcis,cis-9, 12 unsaturation, hydrolyzing both regardless of position within the triglyceride molecule. The enzyme also hydrolyzescis-9-16∶1,cis,trans-9,12-18∶2,trans,cis-9,12-18∶2, palmitoyl oleate and cholesteryl oleate. Digested at comparatively slow rates are:trans,trans-9,12-18∶2, double bond positional isomers of 18∶1 (other thancis-9), stearolic acid, oleoylpalmitate, dilinoleoyl phosphatidyl choline, and saturated acids. The enzyme has an optimum pH
of 8.2, and the lyophilized powder is extremely stable, retaining activity for at least eight years when stored at-20 C. A
purification of 81-fold has been achieved.
One of five papers presented in the Symposium “Microbial Lipolytic Enzymes,” AOCS Spring Meeting, New Orleans, April 1973.
Scientific contribution 556, Agricultural Experiment Station, University of Connecticut, Storrs, Conn. 06268. 相似文献
High pressure microdilatometer experiments were performed on a subbituminous (Wyodak) and a bituminous (Illinois no. 6) coal in helium and hydrogen atmospheres with and without added tetralin. Wyodak coal samples showed no swelling but contractions ranging between 24 and 40 vol% upon heating at 20 and 100 °C min− 1 under helium or hydrogen pressures between 150 and 1000 psig (˜1.0–6.9 MPa). Under the same conditions, Illinois no. 6 coals displayed contractions (25–60 vol%) prior to swelling up to 117 vol%. Upon tetralin addition (at 35–190 wt% of the coal), Wyodak coal samples did not swell but showed an increasing contraction with increasing helium or hydrogen pressure due to a slight softening and fusion of the coal particles. In contrast, addition of tetralin at much lower concentrations (5–35 wt%) had a marked effect on the contraction and swelling behaviour of Illinois no. 6. A maximum swelling of 200 vol% was obtained at a tetralin addition of 30 wt%. The increased swelling results from more extensive softening and fusion of coal particles in the presence of tetralin. Both coals showed a decreasing char yield with increasing tetralin concentration. The substantially lower extent of interaction observed between Wyodak coal samples and tetralin compared to Illinois no. 6 coal can be attributed to the differences in pore structure and/or chemical constitution of the two coal samples. Examination of the resultant solids by optical microscopy revealed the microstructural changes produced by thermal treatment in dilatometer experiments. 相似文献
Various poly(arylsilane)s The poly(carbosilane)s prepared in this way are of higher molecular weight than when prepared by the Wurtz-type condensation route previously reported. TG shows 40–50% overll weight loss attained at 500–600°C. 相似文献
Gas chromatography – mass spectrometry analyses of the headspace volatiles of Scots pine (Pinus sylvestris) induced by egg deposition of the sawfly Diprion pini were conducted. The odor blend of systemically oviposition-induced pine twigs, attractive for the eulophid egg parasitoid Chrysonotomyia ruforum, was compared to volatiles released by damaged pine twigs (control) that are not attractive for the parasitoid. The mechanical damage inflicted to the control twigs mimicked the damage by a sawfly female prior to egg deposition. The odor blend released by oviposition-induced pine twigs consisted of numerous mono- and sesquiterpenes, which all were also present in the headspace of the artificially damaged control twigs. A quantitative comparison of the volatiles from oviposition-induced twigs and controls revealed that only the amounts of (E)--farnesene were significantly higher in the volatile blend of the oviposition-induced twigs. Volatiles from pine twigs treated with jasmonic acid (JA) also attract the egg parasitoid. No qualitative differences were detected when comparing the composition of the headspace of JA-treated pine twigs with the volatile blend of untreated control twigs. JA-treated pine twigs released significantly higher amounts of (E)--farnesene. However, the JA treatment induced a significant increase of the amount of further terpenoid components. The release of terpenoids by pine after wounding, egg deposition, and JA treatment is discussed with special respect to (E)--farnesene. 相似文献
This study is an experimental investigation of heat and moisture transfer within a packed bed of polycrystalline, porous potash pellets. Experiments were first performed to determine the moisture uptake characteristics on individual pellets subject to a step-change in relative humidity. Then a bed of pellets was subjected to flows of humid air on the upper boundary and a cold impermeable surface on the lower boundary resulting in a temperature gradient across the bed. Temperature and moisture content were measured within the bed. It was found that moisture uptake is less for potash pellets and they are less likely to cake than granular and standard potash when subjected to the same ambient air conditions. This is due to the porous nature of the pellet and its nearly uniform size and spherical shape. 相似文献