Nickel and chromium cycles: Stocks and flows project part IV

Nickel and chromium are essential ingredients in alloys increasingly important for energy-efficient, environmentally friendly modern technology. Quantitative assessment of the flows of these metals through the world economy from resource extraction to final disposal informs resource policy, energy planning, environmental science, and waste management. This article summarizes the worldwide technological cycles of nickel and chromium in 2000. Stainless steel is the major use of these metals, but they serve numerous other special needs, as in superalloys for high-temperature service, as plating materials, and in coinage. Because they are used primarily in alloys, novel recycling issues arise as their use becomes more widespread. “... the great New York and St. Louis double track, nickel plated railroad...” — Norwalk, Ohio, Chronicle 10 March 1881 announces arrival of surveyors for the future Nickel Plate Railway “Later [1911] I formed an alloy of Iron and Chromium, which showed remarkable resistance to rust and tarnish ... [It was] rediscovered by an Englishman named Brearley, in 1914.” —Elwood Haynes to Stephen F. Roberts, 17 January 1925     

NIST 0:45 reflectometer

The NIST 0:45 reflectometer measures the spectral reflectance factor at an influx angle of 0° and an efflux angle of 45° of colored, nonfluorescent specimens at room temperature, with widths ranging from 3 to 10 cm and heights from 3 to 20 cm and with an uncertainty of less than 0.5 in color difference units. Published in 2008 by John Wiley & Sons, Inc. Col Res Appl, 33, 94–99, 2008     

Yodel: A Yield Stress Model for Suspensions

A model for the yield stress of particulate suspensions is presented that incorporates microstructural parameters taking into account volume fraction of solids, particle size, particle size distribution, maximum packing, percolation threshold, and interparticle forces. The model relates the interparticle forces between particles of dissimilar size and the statistical distribution of particle pairs expected for measured or log-normal size distributions. The model is tested on published data of sub-micron ceramic suspensions and represents the measured data very well, over a wide range of volume fractions of solids. The model shows the variation of the yield stress of particulate suspensions to be inversely proportional to the particle diameter. Not all the parameters in the model could be directly evaluated; thus, two were used as adjustable variables: the maximum packing fraction and the minimum interparticle separation distance. The values for these two adjustable variables provided by the model are in good agreement with separate determinations of these parameters. This indicates that the model and the approximations used in its derivation capture the main parameters that influence the yield stress of particulate suspensions and should help us to better predict changes in the rheological properties of complex suspensions. The model predicts the variation of the yield stress of particulate suspensions to be inversely proportional to the particle diameter, but the experimental results do not show a clear dependence on diameter. This result is consistent with previous evaluations, which have shown significant variations in this dependence, and the reasons behind the yield stress dependence on particle size are discussed in the context of the radius of curvature of particles at contact.     

Barriers to Increased Engineering Graduate Enrollments: Counterforces and Their Implementation

This paper highlights the role of the faculty member in recruiting students currently enrolled in B.S. programs in engineering and the sciences into full-time pursuit of a graduate-level engineering degree. The faculty member is demonstrated to be in a unique position to influence such students, providing strong counterforces to a confluence of attitudes and pressures experienced during the B.S. experience which effectively create a barrier to full-time engineering graduate study. We analyze this barrier via the method of force field analysis, and demonstrate that effective recruitment into full-time graduate study must be based on a four-fold strategy of education, expectations, improved B.S. experience and better control of the B.S. environment. Approaches to implement these strategies are discussed.     

Association of Escherichia coli O157:H7 with preharvest leaf lettuce upon exposure to contaminated irrigation water.

Recent foodborne outbreaks have linked infection by enterohemorrhagic Escherichia coli (EHEC) serotype O157:H7 to the consumption of contaminated lettuce. Contamination via food handler error and on-the-farm contamination are thought to be responsible for several outbreaks. Though recent studies have examined the application of EHEC to store-bought lettuce, little is known about the attachment of EHEC to growing plants. We investigated the association of lettuce seedlings with EHEC O157:H7 strains implicated in lettuce or fruit outbreaks using hydroponic and soil model systems. EHEC strains that express the green fluorescent protein were observed by stereomicroscopy and confocal laser scanning microscopy to determine adherence patterns on growing lettuce seedlings. Bacteria adhered preferentially to plant roots in both model systems and to seed coats in the hydroponic system. Two of five nonpathogenic E. coli strains showed decreased adherence to seedling roots in the hydroponic system. EHEC was associated with plants in as few as 3 days in soil, and contamination levels were dose-dependent. EHEC levels associated with young plants inoculated with a low dose suggested that the bacteria had multiplied. These data suggest that preharvest crop contamination via contaminated irrigation water can occur through plant roots.     

Optimal Hybrid Control for Structures

A new method for integrated design of passive and active elements is presented. Rather than the existing qualitative selection of parameters for passive elements, a quantitative approach is proposed that finds optimal active and passive parameters with respect to an H₂/H_∞ performance requirement. This new approach automatically yields passive designs when the given performance limits are high enough and active (hybrid) designs when the given performance constraints are stringent. Furthermore, our algorithm finds the special performance requirement (the peak of the frequency response) that cannot be satisfied by any passive design. Hence this article shows how to determine when control is required rather than assuming a priori that it is or is not required. A simple design method given herein yields either passive, active, or hybrid designs depending only on the level of the performance constraints that are specified in the statement of the problem.     

Performance calculations of residential cooling systems for simplified energy analysis

The seasonal performance of space cooling systems generally depends on indoor and outdoor temperatures and humidities and on the ratio between actual cooling loads and cooling equipment size. In principle, any given weather condition and desired indoor dry-bulb temperature calls for an interactive application of psychrometrics and equipment performance curves until satisfactory indoor conditions are derived for which both sensible and latent cooling loads equal sensible and latent heat removal rates. This paper presents a simplified approach that derives the indoor wet-bulb temperature in close form for both cases when the cooling system condenses water from the space and when it does not. This approach relies on a local linearization of the psychrometric chart in the region of interest for indoor comfort conditions. Performance curves for total and sensible capacity and for the electric power input were derived for several different residential air-to-air reciprocating compressive cooling systems. The performance curves are empirical fits to manufacturer's data or to laboratory results. The predictions of the simplified method were compared with DOE-2 when calculating space cooling consumption for a residence in both a hot arid and in a hot humid climate. The comparison showed excellent agreement both for hour-by-hour calculations and for monthly calculation of this method are sufficiently simple to be applicable to micro-computers and pocket calculators.     

Declines in divergent thinking with age: Cross-sectional, longitudinal, and cross-sequential analyses.

Six measures of divergent thinking were administered to 825 men ranging in age from 17 to 101 over the period from 1959 to 1972; repeat administrations were given to a subset of 278 men after a 6-year interval. Cross-sectional analyses showed curvilinear trends, with an increase in scores for men under 40 and a decline thereafter. Repeated measures analyses on subjects initially aged 33 to 74 generally replicated this finding, whereas cross-sequential analyses suggested a decline for all cohorts tested at a later time. Additional analyses suggested that not all of the decline could be attributed to reduced speed of response production. These longitudinal findings confirm earlier cross-sectional reports of decline in divergent thinking abilities with age. (PsycINFO Database Record (c) 2010 APA, all rights reserved)