Isolation of the trail recruitment pheromone ofSolenopsis invicta

TheSolenopsis invicta trail pheromone is synthesized by the Dufour's gland and is released through the sting apparatus. The recruitment subcategory of theS. invicta trail pheromone was shown to be composed of a mixture of the orientation pheromone, (Z,E)--farnesene and an unidentified homosesquiterpene consisting of three rings and one double bond (C-1). C-1 is present in worker Dufour's glands at only 75 pg per worker equivalent. This is the first report that demonstrates that different exocrine products from the same gland control different subcategories of behavior related to mass recruitment.     

Barium Metaplumbate Ceramic Electrodes for Ceramic Capacitors

A novel approach to reduce electrode costs in ceramic capacitors is presented. Barium metaplumbate (BaPbO₃) was fired onto sintered commercial (Ba, Sr)TiO₃ disk capacitors as external electrodes. Samples were compared to disk capacitors of the same composition with electrodes made of sputtered gold and air-dried silver. The ceramic electrode led to substantial changes in the insulation resistance and dc breakdown strengths, but other properties remained the same. The feasibility of using BaPbO₃ electrodes strongly depends on chemical reactions between the electrode and dielectric.     

Microstructure of high modulus solid state extruded polyethylene: 2. X-ray scattering studies of 12, 24 and 36 extrusion draw ratio

The microstructure of a series of solid state extruded polyethylene fibres was examined by wide- and small-angle X-ray scattering. By measuring absolute intensities using a two dimensional position sensitive detector, accurate values of the small-angle invariant for anisotropic samples were obtained. This measurement coupled with wide-angle X-ray scattering and d.s.c. permitted determination of the density of the noncrystalline component. The use of a two phase model for solid state extruded polyethylene is justified if consideration is given to the effective densities of the crystalline and noncrystalline phases, which change with deformation. The effective density of the crystalline phase decreases by 1% (0.999–0.990 g cm^?3) from the unextruded billet compared to a 36 draw ratio extrudate, while the noncrystalline phase density increases by 6% (0.84–0.89 g cm^?3). These changes lead to an overall decrease in the mean squared electron density fluctuation of 63%. The average axial crystallite length measured by wide-angle X-ray scattering increases with extrusion draw ratio while the SAXS long period decreases and weakens considerably. These observations and the electron microscopy results from the previous paper, (Polymer, 1982, 23, 1069), are fully consistent with the key features of the Peterlin model of fibre microstructure.     

Radical entry mechanisms in redox-initiated emulsion polymerizations

The mechanisms and kinetics of radical entry in emulsion polymerizations utilizing redox initiation are investigated using polymerization rate data obtained by reaction calorimetry and electrospray mass spectroscopy analysis of initiator-derived aqueous-phase products. These data have been used to evaluate an initiation scheme for redox-initiated emulsion polymerizations of common monomers such as styrene and methyl methacrylate based around the oxidant, tert-butyl hydroperoxide. Redox initiators are broadly classed by the solubility of their radical products: Hydrophilic radicals enter by propagating to a critical degree of polymerization to become surface-active whilst more hydrophobic radicals may enter particles directly. When direct entry is applicable (the hydrophobic case), initiation efficiency will always be very high.     

PVC thermoplastic elastomers

The paper describes the development and properties of a new family of thermoplastic elastomers based on polyvinyl chloride. Comparisons of the new products with traditional flexible PVC's will be presented, pointing up differences in specific gravity, low temperature properties, heat resistance, melt viscosity, and general physical properties such as tensile modulus and elongation. The elastomeric properties of the new materials are explored and compared to some typical cured elastomers—chloroprene, chlorosulphonated polyethylene. The common thermoplastic elastomers based on block copolymers and polyurethanes are also considered in relation to the new compositions. Such properties as compression-set, flex and fatigue resistance, oil and chemical resistance, weatherability, and performance at elevated temperatures are detailed. The unique feature of this technology that allows one to tailor the surface characteristics from typically high PVC gloss to the fine dull satin finish of cured elastomers is discussed.     

Fluorescence of poly(di-n-alkylsilane)s in room-temperature solution

A comprehensive study of the electronic absorption and emission spectra and the fluorescence quantum yield and lifetime of seven poly(di-n-alkylsilane)s and of three isotopically labelled poly(di-n-hexylsilane)s in hydrocarbon solution at room temperature is reported. Also reported are fluorescence polarization and carbon tetrachloride quenching of fluorescence of poly(di-n-hexylsilane). The observed fluorescence spectra, quantum yield, and polarization depend on the selected excitation energy in a very characteristic fashion, whereas the fluorescence lifetime does not; however, it depends on the selected emission energy. These characteristic dependencies are qualitatively accounted for by the previously proposed segment distribution model if one assumes that the photophysical behavior at higher excitation energies is strongly affected by the presence of a low-lying weakly allowed state in short-segment chromophores and the behavior at lower excitation energies is dictated by the selective excitation of emitting long-segment chromophores.     

Study of UAV tracking based on CNN in noisy environment

Multimedia Tools and Applications - Recently, there are lots of tracking methods proposed to improve the performance of visual tracking in videos with challenging situations, such as background...     

A high-temperature oxidation-resistant Fe-Mn-Al-Si alloy

To develop satisfactory alloys without Cr or Ni for high-temperature application up to 1100C, three alloys based on Fe-10%Al-Si with differing fourth (or fifth) element additions were oxidized in air at 1100°Cfor 24 hr. A low carbon, Fe-30Mn-10Al-Si alloy exhibited excellent high-temperature oxidation resistance. The total weight gain for 24 hr oxidation in air at 1100°C was only 1.03 mg/cm ². After air oxidation for 6 days at 1100°C, no nodule formation or breakthrough oxidation occurred. Post-oxidation SEM and EDAX examination showed that a thin, compact, protective alumina scale formed on the alloy.Visiting Scientist (People's Republic of China).     

Thermal spraying of biomaterials

Osteoconductive hydroxyapatite coatings for metallic endoprostheses for hip and knee joint replacement provide a state-of-the-art template for enhanced in-growth of bone cells. However, the high temperature of the plasma jet leads to large scale dehydroxylation and decomposition of the starting powder. A model is being developed to explain the formation of chemically and mechanically inhomogeneous porous calcium phosphate coatings deposited by atmospheric plasma spraying onto titanium alloy substrates. In addition the biofunctionality is being discussed of titania bond coats and their influence on the in vivo performance of hydroxyapatite-titania duplex coating systems.     

Production of niobium powder by magnesiothermic reduction of niobium oxides in a cyclone reactor

In the last years, a variety of processes respectively process steps have been investigated for the production of niobium powder. This is due to the fact that niobium capacitors could be a viable alternative to tantalum capacitors from a performance, availability, and price point of view. The reduction of niobium pentoxide by magnesium results in fine powders with high specific surface area but has the disadvantages of a very exothermic nature and the formation of magnesium niobate. It is shown in this work that the application of a continuously operating cyclone reactor and the use of niobium(IV) oxide as raw material solve these problems. A good control of the highly exothermic reaction within the cyclone reactor was achieved in the cyclone reactor by the ratio between gas flow rate and powder flow rate as well as by a proper preheating of the gas.