Silicon Nitride Derived from an Organometallic Polymeric Precursor: Preparation and Characterization

Partially crystalline Si₃N₄, with nanosized crystals and a specific surface area greater than 200 m²/g, is obtained by pyrolysis of a commercially available vinylic polysilane in a stream of anhydrous NH₃ to 1000°C. This polymer does not contain N initially. Crystallization to high-purity α-Si₃N₄ proceeds with additional heating above 1400°C under N₂. The changes in crystallinity, powder morphology, infrared spectra, and elemental compositions, for samples annealed from 1000° to 1600°C under N₂, are consistent with an amorphous-to-crystalline transformation. Although macroscopic consolidation and local densification occur at 1400°C, volatilization and accompanying weight loss limit bulk densification. The effect of temperature on specific surface area is examined and related to the sintering process. These results are applicable to pyrolysis, decomposition, and crystallization studies of ceramics synthesized by polymeric precursor routes.     

Rolling Kanban: a new visual tool to schedule family batch manufacturing processes with kanban

Rolling Kanban is the name of a kanban management methodology for batch processes manufacturing environment. Proposed in the early 2000s by FESTO Consulting, for two decades we have lost knowledge both from operative and scientific point of view. Basically, Rolling Kanban means a visual planning methodology based on the production of product-families and variants where: (i) set-up times are reduced between the products of the same family, and (ii) relevant times (dozens of minutes if not even hours) must be considered for changeover between products of different families. In addition, the cyclic production sequence between different product families cannot be maintained. Considering that very few technical information and documents are available about this approach, the main objective of this paper is to retrieve and present, for the first time to the scientific community, the Rolling Kanban methodology. Besides, a real industrial implementation concerning a manufacturer of domestic fittings is discussed as a case study. More specifically, two novel versions of the original Rolling Kanban technique are fully presented to effectively overcome certain limits and criticalities found during its operative use, such as the difficulty to realise a pull production, considering increased set-up time for changeover between products of different families.     

Residual behavior of steel rebars and R/C sections after a fire

The mechanical properties of various steel bars exposed to high temperature (“residual” properties) are experimentally investigated up to 850 °C, with reference to a number of steel and bar types (carbon and stainless steel; quenched and self-tempered bars; hot-rolled and cold-worked bars; smooth and deformed bars). The aim is to clarify to what extent the thermal sensitivity of the different bars affects the ultimate capacity of a typical R/C section subjected to an eccentric axial force, past a fire (“residual” capacity). As usual in the design of R/C sections under combined bending and axial loading, the ultimate behavior is represented through the “M–N envelopes”, where the materials strength decay due to high temperature is taken into account. The results show that quenched and self-tempered bars (QST), very popular in Europe, are more temperature-sensitive above 600 °C than the carbon-steel bars extensively used in the States and nowadays rarely used in Europe. Furthermore, the best response is exhibited by the stainless-steel bars, provided that they are hot rolled, as it is generally the case for medium- and large-diameter bars. Similar conclusions can be drawn for the sections reinforced with the different bar types.     

Investigation of polymerizability of ω-alkenyldioxolanes with α-olefins and alkyl vinyl ethers by modified ziegler-natta catalysts

Results are presented of an investigation on the polymerizability of functional olefins, such as allylisopropylidene glycerol (AIPG) and undecenylisopropylidene glycerol (UIPG), in the presence of conventional and modified Ziegler-Natta catalysts based on TiCl₄ or MgCl₂-supported titanium and triisobutylaluminum, hexaisobutyltetraalumoxane, or bisdiethyl-aluminum sulfate. Homopolymerization experiments were performed on AIGP at temperatures of -78, 25, and 50°C; only these at 50°C provided appreciable amounts of polymeric materials insoluble in methanol, whose structures comprise monomeric units derived from opening both dioxolane rings and vinyl double bonds. In spite of all attempts and precautions, polymerization experiments carried out on mixtures of the functional olefins AIPG and UIPG with either 4-methyl-1-pentene or isopropyl vinyl ether gave rise to the homopolymers of the nonfunctional α-olefin and of the vinyl ether, without any appreciable amount of either copolymers or homopolymers of the dioxolane containing monomers. © 1996 John Wiley & Sons, Inc.     

A strategy for the efficient full-wave description of complex waveguide networks

The mode-matching analysis of rectangular waveguide networks requires a complex segmentation of the structure into simple elements. The way these elements are connected has a strong influence on the computing performance of the code. Moreover, for complex structures the size of the coefficient matrix of the main system can easily reach unaffordable dimensions, so that the use of an efficient solving strategy becomes indispensable. A new approach to the optimum automatic choice of the interconnections is presented, leading to a highly stable and outperforming method of analysis. A Butler 4 × 4 matrix, with six branch guide couplers and four phase shifters, containing 336 uniform waveguide sections and bifurcations, has been studied, and the presented strategy has allowed a performance increase up to two orders of magnitude. © 1996 John Wiley & Sons, Inc.     

COVID-19 and Lung Mast Cells: The Kallikrein–Kinin Activation Pathway

Mast cells (MCs) have relevant participation in inflammatory and vascular hyperpermeability events, responsible for the action of the kallikrein–kinin system (KKS), that affect patients inflicted by the severe form of COVID-19. Given a higher number of activated MCs present in COVID-19 patients and their association with vascular hyperpermeability events, we investigated the factors that lead to the activation and degranulation of these cells and their harmful effects on the alveolar septum environment provided by the action of its mediators. Therefore, the pyroptotic processes throughout caspase-1 (CASP-1) and alarmin interleukin-33 (IL-33) secretion were investigated, along with the immunoexpression of angiotensin-converting enzyme 2 (ACE2), bradykinin receptor B1 (B1R) and bradykinin receptor B2 (B2R) on post-mortem lung samples from 24 patients affected by COVID-19. The results were compared to 10 patients affected by H1N1pdm09 and 11 control patients. As a result of the inflammatory processes induced by SARS-CoV-2, the activation by immunoglobulin E (IgE) and degranulation of tryptase, as well as Toluidine Blue metachromatic (TB)-stained MCs of the interstitial and perivascular regions of the same groups were also counted. An increased immunoexpression of the tissue biomarkers CASP-1, IL-33, ACE2, B1R and B2R was observed in the alveolar septum of the COVID-19 patients, associated with a higher density of IgE⁺ MCs, tryptase⁺ MCs and TB-stained MCs, in addition to the presence of intra-alveolar edema. These findings suggest the direct correlation of MCs with vascular hyperpermeability, edema and diffuse alveolar damage (DAD) events that affect patients with a severe form of this disease. The role of KKS activation in events involving the exacerbated increase in vascular permeability and its direct link with the conditions that precede intra-alveolar edema, and the consequent DAD, is evidenced. Therapy with drugs that inhibit the activation/degranulation of MCs can prevent the worsening of the prognosis and provide a better outcome for the patient.     

DTG combustion behaviour of charcoals

In this paper, data are reported for the behaviour of some charcoals during combustion and devolatilization in a thermal analyser.     

Molecular Mechanisms and Physiological Changes behind Benign Tracheal and Subglottic Stenosis in Adults

Laryngotracheal stenosis (LTS) is a complex and heterogeneous disease whose pathogenesis remains unclear. LTS is considered to be the result of aberrant wound-healing process that leads to fibrotic scarring, originating from different aetiology. Although iatrogenic aetiology is the main cause of subglottic or tracheal stenosis, also autoimmune and infectious diseases may be involved in causing LTS. Furthermore, fibrotic obstruction in the anatomic region under the glottis can also be diagnosed without apparent aetiology after a comprehensive workup; in this case, the pathological process is called idiopathic subglottic stenosis (iSGS). So far, the laryngotracheal scar resulting from airway injury due to different diseases was considered as inert tissue requiring surgical removal to restore airway patency. However, this assumption has recently been revised by regarding the tracheal scarring process as a fibroinflammatory event due to immunological alteration, similar to other fibrotic diseases. Recent acquisitions suggest that different factors, such as growth factors, cytokines, altered fibroblast function and genetic susceptibility, can all interact in a complex way leading to aberrant and fibrotic wound healing after an insult that acts as a trigger. However, also physiological derangement due to LTS could play a role in promoting dysregulated response to laryngo-tracheal mucosal injury, through biomechanical stress and mechanotransduction activation. The aim of this narrative review is to present the state-of-the-art knowledge regarding molecular mechanisms, as well as mechanical and physio-pathological features behind LTS.