Applications of Diglycolamide Based Solvent Extraction Processes in Spent Nuclear Fuel Reprocessing,Part 1: TODGA

Over the last decade there has been much interest in the applications of diglycolamide (DGA) ligands for the extraction of the trivalent lanthanide and actinide ions from PUREX high active raffinates or dissolved spent nuclear fuel. Of the DGAs, the N,N,N’,N’-tetraoctyldiglycolamide (TODGA) is the best known and most widely studied. A number of new actinide separation processes have been proposed based on extraction with TODGA. This review covers TODGA-based processes and extraction data, specifically focusing on how phase modifiers have been used to increase metal loading and thus enhance the operating process envelopes. Effects of third phase formation and the organic phase speciation are reviewed in this context. Relevant aspects of the extraction chemistry of important solvents (TODGA-modifier-diluent combinations) are described and their performances demonstrated by a consideration of the published flowsheet tests. It is seen that modifiers are successfully enabling the use of TODGA in actinide separation processes but to date the identification and testing of suitable modifiers has been rather empirical. There is a growing understanding of the fundamental chemistry occurring in the organic phase and how that affects extractant speciation and metal loading capacity but studies are still needed if TODGA-based flowsheets are to become an industrially deployable option for minor actinide (MA) recovery processes.     

Blue, green and red emissive silver nanoclusters formed in organic solvents

Strongly luminescent silver nanoclusters with tunable emission are directly synthesized in organic polar and apolar solvents. We show that an amphiphilic polystyrene-block-poly(methacrylic acid) block copolymer can be universally used as their support medium. A remarkable similarity in spectroscopic properties is observed between these clusters and charge-transfer organic dyes.     

Remaining Fatigue Life Assessment of Plasma Sprayed Thermal Barrier Coatings

Ceramic functional coatings are frequently applied to structural materials, covering a wide range of thermomechanical and electrochemical applications. The main limiting feature is their reliability when subjected to cyclic transient thermal stresses. The study described in this article is a continuation of earlier research study focused on acoustic emission (AE) monitoring of the thermomechanical aging effects in ceramic coatings. Here, emphasis is placed on the usefulness of combining AE short-term monitoring with finite element modeling (FEM) to predict the performance of such coatings when subjected to cyclic thermal loads. The FEM study presented in this article is based on a three-dimensional, time-dependent approach, of the stress fields that developed within the coatings during the post-deposition cooling step and the thermal cycling. Experiments were conducted using yttrium-stabilized zirconia (YSZ) and Alumina (Al₂O₃) ceramic coatings combined with a NiCr-based intermetallic bond coat.     

Calculations of Solution Energies of Fission Products in Uranium Dioxide

Both lattice simulation and quantum-mechanical techniques are applied to the study of the sites and solution energies of fission products in UO₂. We consider noble gas atoms, alkali metal, alkaline-earth, and halide species. It is shown that the charge state of the dissolved fission product may depend on the fuel stoichiometry. In particular, iodine may be stable as either I⁺ at U sites or I^– at O sites in UO_2+x, but should be present only as I^– at O sites in UO_2–x.     

PPAR-Gamma Activation May Inhibit the In Vivo Degeneration of Bioprosthetic Aortic and Aortic Valve Grafts under Diabetic Conditions

Background: We aimed to examine the anti-calcification and anti-inflammatory effects of pioglitazone as a PPAR-gamma agonist on bioprosthetic-valve-bearing aortic grafts in a rat model of diabetes mellitus (DM). Methods: DM was induced in male Wistar rats by high-fat diet with an intraperitoneal streptozotocin (STZ) injection. The experimental group received additional pioglitazone, and controls received normal chow without STZ (n = 20 each group). Cryopreserved aortic donor grafts including the aortic valve were analyzed after 4 weeks and 12 weeks in vivo for analysis of calcific bioprosthetic degeneration. Results: DM led to a significant media proliferation at 4 weeks. The additional administration of pioglitazone significantly increased circulating adiponectin levels and significantly reduced media thickness at 4 and 12 weeks, respectively (p = 0.0002 and p = 0.0107, respectively). Graft media calcification was highly significantly inhibited by pioglitazone after 12 weeks (p = 0.0079). Gene-expression analysis revealed a significant reduction in relevant chondro-osteogenic markers osteopontin and RUNX-2 by pioglitazone at 4 weeks. Conclusions: Under diabetic conditions, pioglitazone leads to elevated circulating levels of adiponectin and to an inhibition of bioprosthetic graft degeneration, including lower expression of chondro-osteogenic genes, decreased media proliferation, and inhibited graft calcification in a small-animal model of DM.     

Ca-based sorbent looping combustion for CO2 capture in pilot-scale dual fluidized beds

To demonstrate process feasibility of in situ CO₂ capture from combustion of fossil fuels using Ca-based sorbent looping technology, a flexible atmospheric dual fluidized bed combustion system has been constructed. Both reactors have an ID of 100 mm and can be operated at up to 1000 °C at atmospheric pressure. This paper presents preliminary results for a variety of operating conditions, including sorbent looping rate, flue gas stream volume, CaO/CO₂ ratio and combustion mode for supplying heat to the sorbent regenerator, including oxy-fuel combustion of biomass and coal with flue gas recirculation to achieve high-concentration CO₂ in the off-gas. It is the authors' belief that this study is the first demonstration of this technology using a pilot-scale dual fluidized bed system, with continuous sorbent looping for in situ CO₂ capture, albeit at atmospheric pressure. A multi-cycle test was conducted and a high CO₂ capture efficiency (> 90%) was achieved for the first several cycles, which decreased to a still acceptable level (> 75%) even after more than 25 cycles. The cyclic sorbent was sampled on-line and showed general agreement with the features observed using a lab-scale thermogravimetric analysis (TGA) apparatus. CO₂ capture efficiency decreased with increasing number of sorbent looping cycles as expected, and sorbent attrition was found to be another significant factor to be limiting sorbent performance.     

Effect of Boron Content on Hot Ductility and Hot Cracking Susceptibility in 316L Austenitic Stainless Steel for Welding Components

Liquation cracking may occur in the heat-affected zone during welding. Two factors influence this phenomenon: the tensile stresses generated during welding and the potential loss of ductility due to the presence of a liquid film at grain boundaries depending on their chemical composition. Gleeble hot ductility tests have been used to study the combined effect of boron content and holding time on ductility drop in the liquation temperature range of a 316L type austenitic stainless steel. It is shown that high boron contents and short holding times promote the loss of ductility in this temperature range. Secondary ion mass spectrometry has been used to correlate mechanical results to boron distribution either at grain boundaries or in the bulk. Other welding tests have been performed to confirm the influence of boron content on hot cracking sensitivity of AISI 316L stainless steels. Results indicate that cracks appear on all specimens but at different strain levels. The higher the boron content is, the more the specimen exhibits tendency to hot cracking.     

Synthesis of mechanical driver and power generation configurations,Part 2: LNG applications

Optimization framework for the synthesis of power systems has been presented in Part 1 of this article, which systematically identifies the most cost‐efficient number, type, and model of mechanical drivers, together with optimal arrangement for compressor stage, helper motors or generators, and power plants. The developed methodology is applied to an LNG case study in which optimal and near‐optimal systems at various economic scenarios are identified. Also, a systematic methodology for the integrated design of refrigeration and power systems has been addressed to improve the overall design of low temperature processes. Additional key degrees of freedom such as stage pressure ratios and plant capacity are optimized, alongside other design variables, which provide greater flexibility in the matching of power supply and demands. This strategy is applied to an LNG case study and shows the convenience of this approach as the interactions between the refrigeration and power systems are systematically exploited. © 2010 American Institute of Chemical Engineers AIChE J, 2010