Use of the task configuration system (TCS) for the design and on-line optimization of power plants operating with variable loads

The main purpose of this work is to show the ability of the TCS (task configuration system) to perform both the design and the operation optimization of power plants. The TCS is a module that permits to set the main task of each one of the equipments of the system and consequently setting how they respond to variable loads. In this work, the TCS was applied to a micro cogeneration plant of 60 kW in which both the electrical and the thermal loads were variable. Primarily, the design optimization of the nominal power of the equipments and of the TCS configuration was performed for the loads and electricity/fuel costs assumed in the design. After this operational optimizations in cases where the loads and electricity/fuel costs were doubled and then halved in relation to the standard case were performed. The results presented the TCS in a very robust way in most of the cases even the operational conditions being very different from the originally assumed. Based on the results, it is possible to defend the use of the TCS to decrease the risk of high initial investments made in cogeneration systems.     

An adaptive finite element scheme to solve fluid-structure vibration problems on non-matching grids

This paper deals with the computation of the vibration modes of a system consisting of a linear elastic solid interacting with an acoustic fluid. A finite element method based on meshes for each medium not matching on the fluid-solid interface is analyzed. Optimal order of convergence is proved for the approximation of the eigenfunctions, as well as a double order for the eigenvalues. Numerical tests confirming the theoretical results and showing the advantage of using non-matching grids are reported. Finally, an a posteriori error estimator for this method is introduced and combined with a mesh refinement strategy. The efficiency of this adaptive technique is tested with further numerical experiments. Received: 30 January 2001 / Accepted: 30 May 2001     

Assessment of Novel Water-Borne Coatings Obtained from Composite Latex Particles and Reinforced with TiO2 Nanotubes

Novel, environmentally friendly waterborne coatings were obtained from the filmification of nanostructured latex particles reinforced with inorganic nanotubes. The latex used to form the coatings consists of core-shell particles with a shell functionalized with different amounts of acrylic acid (AA). This external polymer layer was doped, in some cases, with TiO₂ nanotubes at three different concentrations: 100, 500 and 1000 ppm. The composite particles were synthesized in two steps by semi-continuous emulsion polymerization at 75°C. A series of films was prepared by employing core-shell particles with different sizes, core cross-linking and shell functionalization. The coatings obtained were characterized by infrared spectroscopy (FTIR), tapping mode atomic force microscopy (TM-AFM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetrical analysis (TGA). Drying rates and tests were also performed to further evaluate these films. It was observed that the addition of small amounts of TiO₂ nanotubes contributes to improve the application properties, mainly adhesion to metallic substrates and water impermeability. The resistance to thermal degradation was also strongly increased, as showed by the DSC and TGA analyses.     

Binary integer programming formulations for scheduling in market-driven foundries

This paper describes the development and solution of binary integer formulations for production scheduling problems in market-driven foundries. This industrial sector is comprised of small and mid-sized companies with little or no automation, working with diversified production, involving several different metal alloy specifications in small tailor-made product lots. The characteristics and constraints involved in a typical production environment at these industries challenge the formulation of mathematical programming models that can be computationally solved when considering real applications. However, despite the interest on the part of these industries in counting on effective methods for production scheduling, there are few studies available on the subject. The computational tests prove the robustness and feasibility of proposed models in situations analogous to those found in production scheduling at the analyzed industrial sector.     

Modelling of mass transfer and texture evaluation during osmotic dehydration of melon under vacuum

The influence of vacuum time and solution concentration on mass transfer and mechanical properties of osmodehydrated melon cubes has been studied. Pulsed vacuum osmotic dehydration (PVOD) was carried out at 30 °C for 4 h, using sucrose solutions (40, 50 or 60°Brix) and applying a vacuum pulse (100 mbar for 5, 10 or 15 min). Kinetics of water loss, solid gain and stress at rupture were analysed, as well as effective diffusivities using the hydrodynamic model. The increase in solution concentration favoured water removal, but no significant effect of vacuum time was observed. The use of less concentrated solutions coupled to the action of vacuum pulse resulted in greater solid uptake. Samples subjected to PVOD using 60°Brix sucrose solution presented greater water loss, lower sugar uptake and better maintenance of fresh fruit texture throughout the process. Diffusion coefficients estimated by the hydrodynamic model showed a good fit to the experimental data.     

Anatomy and behaviour of a post-eruptive rain lahar triggered by a typhoon on Mayon volcano,Philippines

Mayon Volcano in the Philippines, one the world's most active, is situated in a moist, tropical-maritime climate with frequent typhoons. A third of Mayon's eruptions generate destructive lahars (volcanic debris flows and hyperconcentrated streamflows). Lahars also occur during quiescent periods when monsoons and typhoons deliver rains of appropriate intensity and duration to the loose debris on the volcano slopes. Both eruption- and post-eruptive lahars occur most frequently during the typhoon-prone October–December season of the Northeast Monsoon. Post-eruptive lahars, the most poorly documented, are exemplified by a debris-flow event triggered by Saling, a typhoon of only moderate intensity, that occurred in Mabinit Channel on the southeast Mayon flank on October 17–18, 1985, one year after the last Mayon eruption. Detailed pre- and post-Saling surveys docment channel deepening of up to 4 m and maximum lateral erosion of 66 m. The debris flows left prominent, discontinuous multi-level terraces along the length of Mabinit Channel, either from pulsations due to temporary channel blockage, or as levee deposits. A significant volume of debris overtopped channel bends at 250–200 m elevations, coalescing to cover a 200,000 m² area of 4.5° slope with bouldery lateral deposits 1 m thick on the average. Channelized flows below this level plugged 0.5 km of the original channel and replaced it with a new conduit of comparable size. The Saling debris-flow deposits have a remarkably uniform sand-silt mode and less prominent, more variable modes in the pebble-boulder range. Shear strengths of the lateral flows ranged from 0.46×10⁴ to 2.32×10⁴ dn cm^?2; those of the channelized flows at the plug were significantly higher. Reconstructed flow velocity was 3.8 m sec^?1.     

A combinatorial approach to the generalized Baker–Campbell–Hausdorff–Dynkin formula

The aim of this paper is to obtain an explicit expression, instead of using a recursive method, for the nth term coefficient of the generalized Baker–Campbell–Hausdorff–Dynkin (gBCHD) formula. The gBCHD formula has been applied to control theory, specially to nonholonomic motion planning.     

Platform designer: An approach for modeling multiprocessor platforms based on SystemC

This paper[3.5pc] presents the Platform Designer (PD) framework, a set of SystemC based tools that provide support for modeling, simulation and analysis of multiprocessor SoC platforms (MPSoC), at different abstraction levels. PD provides mechanisms for interconnection specification, process synchronization and communication, thus allowing the modeling of a complete platform, in a unified environment. To do that it uses an extension of the ArchC ADL and acsys, a tool that enables the automatic generation of a SystemC simulator of the platform. The main advantages of this approach are twofold. First, designers have more flexibility since they can integrate and configure different processors to the platform, using a single environment. Second, it enables a faster design space exploration, given that it automatically generates SystemC simulators of whole platforms at distinct abstraction levels. A number of platform variations can be tried out with minor design changes, thus reducing design time. Experimental results show the suitability of the platform simulator for design space exploration. Real applications (with medium complexity) run in the platform in few minutes. Combined with the facility to generate platforms with minor changes, this feature allows an improvement of the design space exploration.