The Sterol and Erythrodiol + Uvaol Content of Virgin Olive Oils Produced in Five Olive-Growing Zones of Extremadura (Spain)

The content of sterols and erythrodiol + uvaol was studied in 273 virgin olive oil samples from 40 mills in five olive‐growing zones of Extremadura (Spain). An analysis of variance showed significant differences at a confidence level of 95 % between the different zones in each of the main sterols and in the sum of erythrodiol + uvaol. The results of a linear discriminant analysis, considering the different olive‐growing areas as categorical dependent variables and the different sterols as independent variables, explained 78.2 % of the variance with the first two discriminant functions. The resulting model correctly classified 86.9 % of the samples analysed. A validation study was conducted to verify the goodness of the discriminant analysis, resulting in 79.3 % of the new samples used for validation being correctly classified. In the graphical representation of the different groups studied considering the proposed model's first two discriminant functions, the centroids of the Sierra Norte de Cáceres, Vegas del Guadiana and Tierra de Barros olive‐growing zones were clearly separated, but this was not the case for the other two zones—La Serena and La Siberia.     

Acid catalyst influence on the polymerization time of polyfurfuryl alcohol and on the porosity of monolithic vitreous carbon

This study compares the influence of different acid catalysts on the polymerization rate of polyfurfuryl alcohol (PFA) precursor and especially on the respective porosity of Monolithic Vitreous Carbon (MVC) produced from that. Five acid catalysts commonly used were compared: p‐toluenesulfonic (PTLS), hydrochloric, sulfuric, nitric, and phosphoric. A fixed molar concentration of catalyst was diluted in PFA resin under room pressure and temperature. The time dependence of PFA resin polymerization was investigated by optical transmittance of PFA films, and the polymerization degree, characterized by ATR spectroscopy and thermogravimetry. MVC samples prepared with the same PFA resin and each catalyst were carbonized up to 1200 °C, under inert atmosphere. MVC porosity was studied by nitrogen adsorption/desorption, and by SEM and optical microscopy. Higher polymerization degree and higher residual mass were obtained with faster catalysts. No direct relation between the polymerization rate and the acid force was observed. PTLS promoted the fastest PFA polymerization process and the sulfuric acid, the slowest one. MVC samples were obtained by slow carbonization. MVC presented low specific surface S_BET from 1.4 to 7.4 m²/g. Nitric acid catalyst contributed the most to micropores formation. Micrometric apparent porosity was smaller for the catalysts having longer polymerizations times, such as phosphoric and sulfuric acid. Phosphoric catalyst corresponded to the lowest porosity in MVC. As the polymerization time increased, the average size of the micrometric surface pores tended to augment. The MVC macroscopic porosity increased with the S_BET increment. Acid catalysts choice exerted a fundamental role on the porosity of MVC. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43272.     

Biodegradable composites with improved barrier properties and transparency from the impregnation of PLA to bacterial cellulose membranes

Poly(lactic acid) (PLA) was impregnated in bacterial cellulose (BC) membranes. BC/PLA films were prepared by solvent casting and mechanical, optical and barrier properties, and biodegradation process were investigated. The transparency of processed films was higher than that of neat BC and increased with PLA content. Moreover, the incorporation of PLA to BC enhanced significantly the water vapor barrier properties of the BC membranes. The bionanocomposites contained a high percentage of cellulose due to the impregnation method that leads to the film with a BC content of 94%, which practically maintains the excellent mechanical properties of BC. However, when increasing the PLA content in the bionanocomposites the mechanical properties decreased slightly with respect to BC. Biodegradation under real soil conditions was determined indirectly through the study of the visual degradation and disintegration, demonstrating that the bionanocomposites were degraded faster than the neat PLA. The successful production of BC/PLA bionanocomposites suggested the possible application of them for active food packaging. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43669.     

Synthesis of poly(ester amide)s composed of lactic acid and glycolic acid units by the bulk polycondensation of metal halide salts

Thermal polycondensation of the potassium salt of N‐methylchloroacetyl‐6‐aminohexanoic acid (LAHK) was found to be effective in the preparation of a new poly(ester amide) based on lactic acid units with a high yield and a moderate molecular weight. The reaction started in the solid state and proceeded through the formation of potassium chloride salt as the driving force. The use of a monomer having an amide linkage diminished the secondary reactions previously found in the synthesis of polylactide from 2‐halogenopropionates. The polymerization of potassium salt of N‐chloroacetyl‐6‐aminohexanoic acid (GAHK) took place in a similar temperature range as that of the 2‐chloropropionyl derivative; in this way, it was possible to conduct the copolymerization processes. The polymerization kinetics of LAHK and its mixture with GAHK was studied by Fourier transform infrared spectroscopy. The bulk polycondensation reaction was faster for GAHK than for LAHK, but the kinetic differences were not significant enough to prevent copolymerization at a temperature close to 160°C. Therefore, new degradable materials with tuned properties according to the glycolic acid/lactic acid content were obtained. ¹H‐NMR spectroscopy was useful for following the time evolution of the copolymerization process and for determining the final composition. Calorimetric data showed that all of the samples were thermally stable and that decreases in the melting temperature and enthalpy were observed at intermediate compositions. The existence of an eutectic point became proof that effective copolymerization was achieved in the thermal polycondensation process. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43197.     

Influence of the amorphous phase molecular mobility on impact and tensile properties of polyamide 6,6

In this work, the relationship between molecular mobility of polyamide 6,6 amorphous phase and mechanical properties is studied. PA66 formulations having different glass transition temperatures (T_g) obtained by additivation, chemical modification of the polyamide chains, and/or water conditioning at different hygrometry levels, are considered. The main emphasis is put on the impact strength, as measured by instrumented Charpy impact tests over a broad temperature range. It is observed that the brittle‐tough transition temperature T_B/T is closely correlated with the T_g of the samples rather than to the β secondary relaxation. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43457.     

Utilization of ramon seeds (Brosimum alicastrum swarts) as a new source material for thermoplastic starch production

The development and characterization of biodegradable polymers deriving from renewable natural sources has attracted much attention. The aim of this work was to partially characterize a thermoplastic starch obtained from the starch of seeds from the ramon tree (TPS‐RS) as an option to substitute thermoplastic starch from corn (TPS‐CS), in some of its applications. At 55% of relative humidity (RH), TPS‐RS had higher tensile strength and deformation than TPS‐CS. X‐ray diffraction analysis showed similar values in residual crystallinity (percentage of crystallinity that remains after plasticization process) in both TPS. The SEM micrographs showed a few remnant granular structures in the TPS‐RS. The FTIR showed a greater intensity in band at 1016 cm^?1 in the TPS‐CS and TPS‐RS in comparison with their corresponding native starch, indicating an increase in the amorphous region after plasticization. The TGA analysis showed greater thermal stability in TPS‐CS (340 °C) compared with TPS‐RS (327 °C). In addition, the glass transition temperature in both TPS was 24 °C. The results obtained represent a starting point to potentialize the use of TPS‐RS instead of TPS‐CS for the development of new biodegradable materials for practical applications in different areas. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44235.     

Increased HDL Size and Enhanced Apo A-I Catabolic Rates Are Associated With Doxorubicin-Induced Proteinuria in New Zealand White Rabbits

The catabolism and structure of high‐density lipoproteins (HDL) may be the determining factor of their atheroprotective properties. To better understand the role of the kidney in HDL catabolism, here we characterized HDL subclasses and the catabolic rates of apo A‐I in a rabbit model of proteinuria. Proteinuria was induced by intravenous administration of doxorubicin in New Zealand white rabbits (n = 10). HDL size and HDL subclass lipids were assessed by electrophoresis of the isolated lipoproteins. The catabolic rate of HDL‐apo A‐I was evaluated by exogenous radiolabelling with iodine‐131. Doxorubicin induced significant proteinuria after 4 weeks (4.47 ± 0.55 vs. 0.30 ± 0.02 g/L of protein in urine, P < 0.001) associated with increased uremia, creatininemia, and cardiotoxicity. Large HDL2b augmented significantly during proteinuria, whereas small HDL3b and HDL3c decreased compared to basal conditions. HDL2b, HDL2a, and HDL3a subclasses were enriched with triacylglycerols in proteinuric animals as determined by the triacylglycerol‐to‐phospholipid ratio; the cholesterol content in HDL subclasses remained unchanged. The fractional catabolic rate (FCR) of [¹³¹I]‐apo A‐I in the proteinuric rabbits was faster (FCR = 0.036 h^?1) compared to control rabbits group (FCR = 0.026 h^?1, P < 0.05). Apo E increased and apo A‐I decreased in HDL, whereas PON‐1 activity increased in proteinuric rabbits. Proteinuria was associated with an increased number of large HDL2b particles and a decreased number of small HDL3b and 3c. Proteinuria was also connected to an alteration in HDL subclass lipids, apolipoprotein content of HDL, high paraoxonase‐1 activity, and a rise in the fractional catabolic rate of the [¹³¹I]‐apo A‐I.