Binding of Sulpiride to Seric Albumins

The aim of this work was to study the interaction of sulpiride with human serum albumin (HSA) and bovine serum albumin (BSA) through the fluorescence quenching technique. As sulpiride molecules emit fluorescence, we have developed a simple mathematical model to discriminate the quencher fluorescence from the albumin fluorescence in the solution where they interact. Sulpiride is an antipsychotic used in the treatment of several psychiatric disorders. We selectively excited the fluorescence of tryptophan residues with 290 nm wavelength and observed the quenching by titrating HSA and BSA solutions with sulpiride. Stern-Volmer graphs were plotted and quenching constants were estimated. Results showed that sulpiride form complexes with both albumins. Estimated association constants for the interaction sulpiride–HSA were 2.20 (±0.08) × 10⁴ M⁻¹, at 37 °C, and 5.46 (±0.20) × 10⁴ M⁻¹, at 25 °C. Those for the interaction sulpiride-BSA are 0.44 (±0.01) × 10⁴ M⁻¹, at 37 °C and 2.17 (±0.04) × 10⁴ M⁻¹, at 25 °C. The quenching intensity of BSA, which contains two tryptophan residues in the peptide chain, was found to be higher than that of HSA, what suggests that the primary binding site for sulpiride in albumin should be located next to the sub domain IB of the protein structure.     

Spray Drying of Green Corn Pulp

Maize (Zea mays) is a cereal grown in Brazil, and its availability is limited to the harvest season. An alternative processing route is based on the production of green corn powder, which has a longer shelf-life and increased versatility. This study aimed to evaluate the influence of drying conditions on the physical characteristics, size, and morphology of green corn powder. Drying experiments were performed on a spray dryer according to a central composite rotational design to evaluate inlet air temperature, feed flow rate, and pulp concentration. The yield of dried pulp corn had an average value of 36.19%. The following mean values for the physical properties of the powder were measured: solubility of 94.37 g/100 g, wettability of 128.05 seconds, moisture content of 1.97%, water activity of 0.13, density of 0.79 g/mL, and a particle diameter of 31.02 µm. The powder was also yellow with less intensity, and the particle surface was smooth at higher temperatures and had a tendency to form agglomerates. The estimated optimal conditions for spray drying were 48% (w/w) pulp concentration, 172°C inlet air temperature, and feed flow rate of 0.56 L/h.     

Isothermal crystallization kinetics and morphology of PP/TiO2 nanocomposites using titanium n‐butoxide precursor

This study investigates the influence of the addition of TiO₂, obtained by hydrolysis–condensation reaction of titanium dioxide precursors, on the kinetics of polypropylene (PP) isothermal crystallization. The dispersion of nanoparticle and its relation to the degree of crystallinity by XRD was also investigated. The results indicated that the addition of the TiO₂ increased the degree of crystallinity of PP and its crystallization temperature. Likewise, the nucleation and crystal growth processes were also affected, as indicated by the TEM morphology, the Avrami kinetic model, and the optical microscopy, in which a nucleation effect was detected. POLYM. COMPOS. 36:517–526, 2015. © 2014 Society of Plastics Engineers     

Improving of Micro Porous Layer based on Advanced Carbon Materials for High Temperature Proton Exchange Membrane Fuel Cell Electrodes

This work reports the study of four different carbon materials for their application as carbon material in microporous layers for high temperature proton exchange membrane fuel cells electrodes. The microporous layers were prepared with carbon black (a commercial one, Vulcan XC72), two different carbon nanofibers, CNF, (Ribbon and Platelet structure) and carbon nanospheres, all of them prepared in our lab. The microporous layers were characterized by XRD. The hydrophobicity, electrical conductivity, and permeability to different gases were also evaluated. The stability is an important issue to be overcome in the field of proton exchange membrane fuel cells. Thus, accelerated thermal and electrochemical degradation tests in phosphoric acid media were carried out to evaluate the stability of the different advanced materials tested under the same conditions. From all the performed essays, the carbon nanospheres were the best nano‐carbon materials because of the lower degradation degree shown by the microporous layer prepared with them and the good conductivity and permeability achieved, whereas CNF with a Platelet structure showed a low electrochemical stability due to their greater edge plane exposure which favors their corrosion.     

Temperature stability of a pure metakaolin based K-geopolymer: Part 2. Variations in the mesoporous network and its rehydration stability

The thermal behavior of a model MK-based K-geopolymer was investigated between room temperature and 1400°C in order to evaluate its potentiality for high-temperature applications. The purpose of our study was to monitor the behavior of a geopolymer during a temperature rise in order to better understand its variations with respect to temperature. The works from the present paper focus only changes in the porous network; it follows a first part devoted to variations in the mineral matrix. The results obtained here show that the geopolymer material preserves its porous integrity up to 800°C, while maintaining the reversibility of water exchanges corresponding to about 25 weight percent. Together with the results of part 1, the findings of this study allow us to affirm that geopolymer materials are only very little affected by temperatures up to 800°C, or even 900°C (keeping its mesoporous amorphous structure).     

Resistance variation of conductive ink applied by the screen printing technique on different substrates

This research study focuses on the application of conductive ink by the screen printing technique to evaluate the potential of creating printed electrodes and to investigate the effect of washing upon electrical resistance and flexibility. Two conductive inks were applied by a conventional screen printing method on four different textile substrates, 100% cotton, 50%/50% cotton/polyester, 100% polyester and 100% polyamide. The inks were also applied on a multifibre fabric. Atmospheric plasma treatment was applied to improve the adhesion to the samples, and the resistance values were compared with those of non‐treated samples. The values were measured before and after cleaning and washing tests, which were performed to simulate domestic treatment for garments to predict the behaviour of the inks after normal usage of the fabrics. Comfort properties like stiffness of the fabrics were also evaluated after five and 10 washing cycles. It was observed that PE 825 ink forms a thicker film on the fabric surface, contributing to the loss of flexibility of the textile. However, PE 825 ink also produced the best results in terms of durability and lower values of resistance. Polyamide fabrics lost their conductive property after five washing cycles due to weak bonding between the ink and the fibres, whereas cotton fibres provided the best results.     

Solid Tumors and Kinase Inhibition: Management and Therapy Efficacy Evolution

The increasing numbers of cancer cases worldwide and the exceedingly high mortality rates of some tumor subtypes raise the question about if the current protocols for cancer management are effective and what has been done to improve upon oncologic patients’ prognoses. The traditional chemo-immunotherapy options for cancer treatment focus on the use of cytotoxic agents that are able to overcome neoplastic clones’ survival mechanisms and induce apoptosis, as well as on the ability to capacitate the host’s immune system to hinder the continuous growth of malignant cells. The need to avert the highly toxic profiles of conventional chemo-immunotherapy and to overcome the emerging cases of tumor multidrug resistance has fueled a growing interest in the field of precision medicine and targeted molecular therapies in the last couple of decades, although relatively new alternatives in oncologic practices, the increased specificity, and the positive clinical outcomes achieved through targeted molecular therapies have already consolidated them as promising prospects for the future of cancer management. In recent years, the development and application of targeted drugs as tyrosine kinase inhibitors have enabled cancer treatment to enter the era of specificity. In addition, the combined use of targeted therapy, immunotherapy, and traditional chemotherapy has innovated the standard treatment for many malignancies, bringing new light to patients with recurrent tumors. This article comprises a series of clinical trials that, in the past 5 years, utilized kinase inhibitors (KIs) as a monotherapy or in combination with other cytotoxic agents to treat patients afflicted with solid tumors. The results, with varying degrees of efficacy, are reported.     

Inactivation of Enterobacter sakazakii by pulsed electric field in buffered peptone water and infant formula milk

The effect of high-intensity pulsed electric field (PEF) treatment on the survival of Enterobacter sakazakii suspended in buffered peptone water (BPW) and powdered infant formula milk (IFM) was evaluated. Reference medium and IFM samples were treated with PEF. Electric field intensity and treatment time were varied from 10 to 40 kV cm⁻¹ and from 60 to 3895 μs, respectively. Samples of buffered peptone water (3 g L⁻¹) and IFM were inoculated with E. sakazakii (CECT 858) (10⁹ cfu mL⁻¹) and then treated with PEF. The inactivation data were adjusted to the Weibull frequency distribution function and Bigelow model, and constants were calculated for both substrates. A maximum 2.7 log (cfu mL⁻¹) reduction was achieved in BPW after exposure of E. sakazakii to PEF for 360 μs (2.5 μs pulse width) at 40 kV cm⁻¹. In IFM, exposure of E. sakazakii to PEF, with the same conditions, led to a 1.2 log (cfu mL⁻¹) reduction. The greater the field strength and treatment time, the greater the inactivation achieved in both substrates. Even though further research will be necessary, according to the results, there are good prospects for the use of PEF in hospitals to achieve safe reconstituted infant formula before storage at refrigerated temperatures.     

Applications of Plasma-Activated Water in Dentistry: A Review

The activation of water by non-thermal plasma creates a liquid with active constituents referred to as plasma-activated water (PAW). Due to its active constituents, PAW may play an important role in different fields, such as agriculture, the food industry and healthcare. Plasma liquid technology has received attention in recent years due to its versatility and good potential, mainly focused on different health care purposes. This interest has extended to dentistry, since the use of a plasma–liquid technology could bring clinical advantages, compared to direct application of non-thermal atmospheric pressure plasmas (NTAPPs). The aim of this paper is to discuss the applicability of PAW in different areas of dentistry, according to the published literature about NTAPPs and plasma–liquid technology. The direct and indirect application of NTAPPs are presented in the introduction. Posteriorly, the main reactors for generating PAW and its active constituents with a role in biomedical applications are specified, followed by a section that discusses, in detail, the use of PAW as a tool for different oral diseases.