Short communication: Evaluation of an automated in-house hematology analyzer for bovine blood

The objective of this study was to evaluate the suitability of the V-Sight hematology analyzer (A. Menarini Pharma GmbH, Vienna, Austria) for bovine blood by a comparison with a reference device (Advia 2120i, Siemens AG, Erlangen, Germany). In total, 97 blood samples were obtained from 75 dairy cows. Analyzed parameters included counts of white blood cells (WBC), lymphocytes, monocytes, granulocytes, red blood cells (RBC), and platelets (PLT), as well as hemoglobin concentration (HGB), hematocrit (HCT), mean corpuscular volume, mean corpuscular hemoglobin (MCH), MCH concentration (MCHC), mean platelet volume (MPV), and plateletcrit (PCT). Based on Passing-Bablok regression, the V-Sight provided accurate and precise results for MCH and MCHC only. The PCT results were comparable to the reference method, but precision was inconclusive. Significant proportional differences were detected for monocytes, granulocytes, HCT, and PLT. For all other analytes, significant proportional and systemic differences were observed. The WBC and lymphocyte results from the V-Sight were characterized by poor accuracy, poor precision, and a high number of false positive outliers. Bland-Altman analysis indicated negative biases for all WBC parameters, the erythrocyte indices, and PLT. Positive biases were observed for RBC, HGB, HCT, MPV, and PCT. Correlation coefficients of >0.9 between the V-Sight and the reference method were found only for RBC, HGB, HCT, and MPV. Intraassay precision of the V-Sight analyzer was acceptable (coefficient of variation <5%) for granulocytes, the erythrocyte indices, and MPV. It was unacceptable (coefficient of variation ≥5%) for WBC, lymphocytes, monocytes, as well as RBC, and inconclusive for HGB, HCT, PLT, and PCT. Sensitivity was high for all RBC counts and indices as well as PLT, but low for monocytes, granulocytes, and MPV. Specificity was high for monocytes and granulocytes, but low for RBC, HCT, MCH, and MCHC. With accurate and precise results for only 2 out of 13 parameters, the V-Sight cannot be recommended for analysis of bovine blood.     

Extraction of heavy metals from soils using biodegradable chelating agents

Metal pollution of soils is widespread across the globe, and the clean up of these soils is a difficulttask. One possible remediation technique is ex-situ soil washing using chelating agents. Ethylenediaminetetraacetic acid (EDTA) is a very effective chelating agent for this purpose but has the disadvantage that it is quite persistent in the environment due to its low biodegradability. The aim of our work was to investigate the biodegradable chelating agents [S,S]-ethylenediaminedisuccinic acid (EDDS), iminodisuccinic acid (IDSA), methylglycine diacetic acid (MGDA), and nitrilotriacetic acid (NTA) as potential alternatives and compare them with EDTA for effectiveness. Kinetic experiments showed for all metals and soils that 24 h was the optimum extraction time. Longer times only gave minor additional benefits for heavy metal extraction but an unwanted increase in iron mobilization. For Cu at pH 7, the order of the extraction efficiency for equimolar ratios of chelating agent to metal was EDDS > NTA> IDSA > MGDA > EDTA and for Zn it was NTA > EDDS > EDTA >MGDA > IDSA. The comparatively low efficiency of EDTA resulted from competition between the heavy metals and co-extracted Ca. For Pb the order of extraction was EDTA > NTA >EDDS due to the much stronger complexation of Pb by EDTA compared to EDDS. At higher concentration of complexing agent, less difference between the agents was found and less pH dependence. There was an increase in heavy metal extraction with decreasing pH, but this was offset by an increase in Ca and Fe extraction. In sequential extractions EDDS extracted metals almost exclusively from the exchangeable, mobile, and Mn-oxide fractions. We conclude that the extraction with EDDS at pH 7 showed the best compromise between extraction efficiency for Cu, Zn, and Pb and loss of Ca and Fe from the soil.     

Dissolution,Transport and Reaction at a DICY/DGEBA Interface

The curing of an epoxy consisting of the solid hardener dicyandiamide (DICY) and the resin diglycidyl ether of bisphenol A (DGEBA) is studied in a system consisting of a tablet of DICY embedded in liquid DGEBA. Dissolution of DICY within the liquid DGEBA in combination with the transport of dissolved DICY from the tablet border into DGEBA and the chemical reaction of both reactants is studied by scanning Brillouin microscopy and infrared spectroscopy. Scanning Brillouin microscopy demonstrates the spatial and temporal evolution of the static and dynamic hypersonic properties in the course of curing in the vicinity of the DICY tablet. Infrared spectroscopy performed on epoxy pieces extracted from the final sample at different distances from the tablet surface give information about the spatial evolution of the curing process. The results achieved by both techniques are finally combined to yield a better understanding of the curing of DICY-based epoxies, which transform upon curing from strongly heterogeneous systems towards increasingly homogeneous systems.     

3- Instead of 4-helix formation in a de novo designed protein in solution revealed by small-angle X-ray scattering

De novo design and chemical synthesis of proteins and their mimics are central approaches for understanding protein folding and accessing proteins with novel functions. We have previously described carbohydrates as templates for the assembly of artificial proteins, so-called carboproteins. Here, we describe the preparation and structural studies of three alpha-helical bundle carboproteins, which were assembled from three different carbohydrate templates and one amphiphilic hexadecapeptide sequence. This heptad repeat peptide sequence has been reported to lead to 4-alpha-helix formation. The low resolution solution structures of the three carboproteins were analyzed by means of small-angle X-ray scattering (SAXS) and synchrotron radiation circular dichroism (SRCD). The ab initio SAXS data analysis revealed that all three carboproteins adopted an unexpected 3+1-helix folding topology in solution, while the free peptide formed a 3-helix bundle. This finding is consistent with the calculated alpha-helicities based on the SRCD data, which are 72 and 68 % for two of the carboproteins. The choice of template did not affect the overall folding topology (that is for the 3+1 helix bundle) the template did have a noticeable impact on the solution structure. This was particularly evident when comparing 4-helix carboprotein monomers with the 2x2-helix carboprotein dimer as the latter adopted a more compact conformation. Furthermore, the clear conformational differences observed between the two 4-helix (3+1) carboproteins based on D-altropyranoside and D-galactopyranoside support the notion that folding is affected by the template, and subtle variations in template distance-geometry design may be exploited to control the solution fold. In addition, the SRCD data show that template assembly significantly increases thermostability.     

Assessment of alimentary histamine exposure of consumers in Austria and development of tolerable levels in typical foods

Although alimentary intake of histamine can cause intoxication, legal limits for histamine content in the EU, exist for certain seafish species only. The present study suggests tolerable levels for fermented sausage, fish and cheese which are based on relating the amount of histamine not expected to cause any health effects after ingestion to typically consumed amounts of food. Limits of 500 and 400 mg/kg would seem to be justifiable for fermented sausage and cheese, respectively. For fish species other than those already regulated in EU, the “m”/”M” limits of 100 and 200 mg/kg can be adopted. These limits can be met by current food technology.     

Atomic Friction Investigations on Ordered Superstructures

We review recent friction measurements on ordered superstructures performed by atomic force microscopy. In particular, we consider ultrathin KBr films on NaCl(001) and Cu(001) surfaces, single and bilayer graphene on SiC(0001), and the herringbone reconstruction of Au(111). Atomically resolved friction images of these systems show periodic features spanning across several unit cells. Although the physical mechanisms responsible for the formation of these superstructures are quite different, the experimental results can be interpreted within the same phenomenological framework. A comparison between experiments and modeling shows that, in the cases of KBr films on NaCl(001) and of graphene films, the tip-surface interaction is well described by a potential with the periodicity of the substrate which is modulated or, respectively, superimposed with a potential with the symmetry of the superstructure.     

Synthesis and thermal decomposition of potassium tetraamidoboranealuminate,K[Al(NH2BH3)4]

A new potassium tetraamidoboranealuminate, K[Al(NH₂BH₃)₄], has been synthesized by a mechanochemical reaction between KAlH₄ and NH₃BH₃. The compound, K[Al(NH₂BH₃)₄], crystallizes in a triclinic unit cell with space group symmetry P?1. The crystal structure consists of [K(NH₂BH₃)₆]^5? octahedra which facilitate the bridging between K⁺ in 1D chains, while also bridging K⁺ to Al³⁺ to connect the 1D chains in a 3D network. Thermal analysis reveals that K[Al(NH₂BH₃)₄] decomposes in two exothermic steps at T ～ 94 and 138 °C and releases primarily hydrogen. The total gas release amounts to ～6.0 wt% H₂. The decomposition products are investigated ex situ by powder X-ray diffraction, infrared spectroscopy, and ¹¹B and ²⁷Al NMR and identified as KBH₄ and amorphous phases, possibly BN₃, N₂BH, and/or NBH₂ whereas aluminum is found in four-, five-, and six-fold coordination. Unfortunately, the decomposed sample shows no hydrogen absorption at T = 260 °C and p(H₂) = 110 bar.     

Optimal sensor placement for joint parameter and state estimation problems in large-scale dynamical systems with applications to thermo-mechanics

We consider large-scale dynamical systems in which both the initial state and some parameters are unknown. These unknown quantities must be estimated from partial state observations over a time window. A data assimilation framework is applied for this purpose. Specifically, we focus on large-scale linear systems with multiplicative parameter-state coupling as they arise in the discretization of parametric linear time-dependent partial differential equations. Another feature of our work is the presence of a quantity of interest different from the unknown parameters, which is to be estimated based on the available data. In this setting, we employ a simplicial decomposition algorithm for an optimal sensor placement and set forth formulae for the efficient evaluation of all required quantities. As a guiding example, we consider a thermo-mechanical PDE system with the temperature constituting the system state and the induced displacement at a certain reference point as the quantity of interest.     

Chronic obstructive pulmonary disease in patients with end‐stage kidney disease on hemodialysis

The objectives of this study were to assess the prevalence of chronic obstructive pulmonary disease (COPD) in hemodialysis patients with spirometry and to examine the effects of fluid removal by hemodialysis on lung volumes. Patients ≥18 years at two Danish hemodialysis centers were included. Forced expiratory volume in one second (FEV₁), forced vital capacity (FVC), and FEV₁/FVC ratio were measured with spirometry before and after hemodialysis. The diagnosis of COPD was based on both the GOLD criteria and the lower limit of normal criteria. There were 372 patients in treatment at the two centers, 255 patients (69%) completed spirometry before dialysis and 242 of these (65%) repeated the test after. In the initial test, 117 subjects (46%) had airflow limitation indicative of COPD with GOLD criteria and 103 subjects (40.4%) with lower limit of normal criteria; COPD was previously diagnosed in 24 patients (9%). Mean FVC and FEV₁ decreased mildly after dialysis (FVC: 2.84 to 2.79 L, P < 0.01. FEV₁: 1.97 to 1.93 L, P < 0.01) Hemodialysis did not affect the FEV₁/FVC ratio or number of subjects with airflow limitation indicative of COPD (113 vs. 120, P = 0.324; n = 242). COPD is a frequent and underdiagnosed comorbidity in patients on chronic hemodialysis. Spirometry should be considered in all patients on dialysis in order to address dyspnea adequately. Hemodialysis induced a small fall in mean FEV₁ and FVC, which was more pronounced in patients with little or no fluid removal, but the FEV₁/FVC ratio and the number of subjects with airflow limitation indicative of COPD were not affected by dialysis.