The MORPHEUS Heterogeneous Dynamically Reconfigurable Platform

Reconfigurable computing offers a wide range of low cost and efficient solutions for embedded systems. The proper choice of the reconfigurable device, the granularity of its processing elements and its memory architecture highly depend on the type of application and their data flow. Existing solutions either offer fine grain FPGAs, which rely on a hardware synthesis flow and offer the maximum degree of flexibility, or coarser grain solutions, which are usually more suitable for a particular type of data flow and applications. In this paper, we present the MORPHEUS architecture, a versatile reconfigurable heterogeneous System-on-Chip targeting streaming applications. The presented architecture exploits different reconfigurable technologies at several computation granularities that efficiently address the different applications needs. In order to efficiently exploit the presented architecture, we implemented a complete software solution to map C applications to the reconfigurable architecture. In this paper, we describe the complete toolset and provide concrete use cases of the architecture.     

Optimization of exit-plane waves restored from HRTEM through-focal series

Atomic-resolution transmission electron microscopy has largely benefited from the implementation of aberration correctors in the imaging part of the microscope. Though the dominant geometrical axial aberrations can in principle be corrected or suitably adjusted, the impact of higher-order aberrations, which are mainly due to the implementation of non-round electron optical elements, on the imaging process remains unclear. Based on a semi-empirical criterion, we analyze the impact of residual aperture aberrations on the quality of exit-plane waves that are retrieved from through-focal series recorded using an aberration-corrected and monochromated instrument which was operated at 300 kV and enabled for an information transfer of ∼0.05 nm. We show that the impact of some of the higher-order aberrations in retrieved exit-plane waves can be balanced by a suitable adjustment of symmetry equivalent lower-order aberrations. We find that proper compensation and correction of 1st and 2nd order aberrations is critical, and that the required accuracy is difficult to achieve. This results in an apparent insensitivity towards residual higher-order aberrations. We also investigate the influence of the detector characteristics on the image contrast. We find that correction for the modulation transfer function results in a contrast gain of up to 40%.     

Long time reliability study of soldered flip chips on flexible substrates

Due to the requirements of new light, mobile, small and multifunctional electronic products the density of electronic packages continues to increase. Especially in medical electronics like pace makers the minimisation of the whole product size is an important factor. So flip chip technology becomes more and more attractive to reduce the height of an electronic package. At the same time the use of flexible and foldable substrates offers the possibility to create complex electronic devices with a very high density. In terms of human health the reliability of electronic products in medical applications has top priority.In this work flip chip interconnections to a flexible substrate are studied with regard to long time reliability. Test chips and substrates have been designed to give the possibility for electrical measurements. Solder was applied using conventional stencil printing method. The flip chip contacts on flexible substrates were created in a reflow process and underfilled subsequently.The assemblies have been tested according to JEDEC level 3. The focus in this paper is the long time reliability up to 10,000 h in thermal ageing at 125 °C and temperature/humidity testing at 85 °C/85% relative humidity as well as thermal cycling (0 °C/+100 °C) up to 5000 cycles. Daisy chain and four point Kelvin resistances have been measured to characterise the interconnections and monitor degradation effects.The failures have been analysed in terms of metallurgical investigations of formation and growing of intermetallic phases between underbump metallisation, solder bumps and conductor lines. CSAM was used to detect delaminations at the interfaces underfiller/chip and underfiller/substrate respectively.     

Implementation of 2-D pseudo-rotated digital filters using a forward lattice structure

The 1-D FDLS shows the localized feedback property and is suitable for modular and concurrent implementation. It is known that the 1-D FDLS shows interesting properties with respect to finite word-length effects. In this paper, a new result is given for the estimation of the lower and upper bound of the variance of the roundoff noise. It is presented how the FDLS can be incorporated to implement 2-D pseudo-rotated digital filters. The 1-D roundoff noise analysis is extended to the 2-D case. It is indicated how 2-D filter banks can be derived from the FDLS.     

A pragmatic approach to wind farm simulations using the dynamic wake meandering model

This paper presents a computationally efficient method for using the dynamic wake meandering model to conduct simulations of wind farm power production. The method is based on creating a database, which contains the time and rotor‐averaged wake effect at any point downstream of a wake‐emitting turbine operating in arbitrary ambient conditions and at an arbitrary degree of wake influence. This database is later used as a look‐up table at runtime to estimate the operating conditions at all turbines in the wind farm, thus eliminating the need to run the dynamic wake meandering model at runtime. By using the proposed method, the time required to conduct wind farm simulations is reduced by three orders of magnitude compared with running the standalone dynamic wake meandering model at runtime. As a result, the wind farm production dynamics for a farm of 100 turbines at 10,000 different sets of ambient conditions run on a normal laptop in 1 h. The method is validated against full scale measurements from the Smøla and OWEZ wind farms, and fair agreement is achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

Erhitzen von Weizen

Zusammenfassung Teige aus erhitzten Weizenkörnern (45–75 °C/6 min bei 20% Wassergehalt) wurden mit der Capillarviscosimetrie und mit einem Mikrobackversuch untersucht. Beide Methoden zeigten eine erhitzungsbedingte Verfestigung des Klebers an. Eine Untersuchung der Mehlproteine ergab bei der Osbornefraktionierung eine Verschiebung von Albuminen/Globulinen in den Rückstand. Zugversuche sowie calorimetrische Messungen mit hitzebehandeltem Kleber lassen auf Konformationsänderungen der Proteine als Ursache für die Kleberverfestigung schließen.

---

Heating of wheat. 2. Rheological and baking behaviour, changes in Osborne fractions

Dough from heated wheat kernels (45–75° C/ 6 min, 20% water content) were examined by capillary viscosimetry and by a micro-baking test. Both methods showed an increase in gluten strength. Osborne fractionation of the proteins showed a shift of albumins/globulins to the residual protein. Load-extension tests and calorimetric measurements with heat-treated gluten led to the conclusion that changes in protein conformation are responsible for the increase in gluten strength.

     

Male pheromone of swift moth,Hepialus hecta L. (Lepidoptera: Hepialidae)

(R)-6-Ethyl-2-methyl-2,3-dihydro-4H-pyran-4-one, (1R,3S,5R)-3-ethyl-1,8-dimethyl-2,9-dioxabicyclo[3.3. 1]non-7-ene, and (1R,3S,5R)-3-ethyl-1,8-dimethyl-2,9-dioxabicyclo[3.3.1]non-7-en-6-one represent the main components in the male pheromone of the swift moth,Hepialus hecta. The amounts of the three components were 40, 5, and 5 g per male, respectively. Structure elucidation of the compounds was based on spectroscopic data as compared to synthetic reference samples. The absolute configurations were determined by gas chromatography on chiral stationary phases; optically active samples served as reference compounds. Electrophysiological and behavioral experiments with natural material and synthetic samples clearly showed the three heterocyclic compounds to act as pheromones. (E, E)--Farnesene represents the main component of the scent secretion of maleHepialus humuli.