Application of high mobility transparent conductors to enhance long wavelength transparency of the intermediate solar cell in multi-junction solar cells

High mobility transparent conducting oxide (HMTCO) materials (mobility > 60 cm² V^− 1 s^− 1) have a high transmission over the visible to near infra red wavelength region with resistivity < 2 × 10^− 4 Ω cm. We investigate the application of HMTCO materials as transparent contacts for multi-junction and bifacial solar cells to increase the device NIR transmission. Using the HMTCO materials as front contacts significantly reduces absorption and reflection losses of the solar cells, from 850-1500 nm. The need to develop a low temperature process to prepare HMTCO materials as back contacts in semi-transparent solar cells is also emphasized.     

Digital image correlation techniques to investigate strain fields and cracking phenomena in asphalt materials

This paper is the outcome of a specific task group of the RILEM Technical Committee 241-MCD “Mechanisms of Cracking and Debonding in Asphalt and Composite Pavements”. The group on “Advanced Measurement Techniques” was established in 2011 to investigate DIC applications for non-destructive and non-contact measurements of strain fields during laboratory testing. The paper illustrates different DIC/optical flow applications in measuring strain distribution during laboratory testing. Specific applications of DIC for evaluating crack initiation and crack propagation in asphalt materials are presented.     

Design and analysis of an integrated antiresonant reflecting optical waveguide refractive-index sensor

An integrated optical waveguide refractometer, believed to be novel, is presented. The sensor is based on an antiresonant reflecting optical waveguide and uses the strong attenuation dependence on the refractive index of antiresonant cladding layers as the sensing principle. The theory and the operation of the sensor are discussed in terms of one- and two-dimensional geometry. The theoretical predictions and numerical analysis show that a versatile sensor can be realized. The design trade-offs are discussed, and the sensitivity and measurement range are presented.     

Mechanical behaviour of surface layer fibreglass-reinforced flexible pavements

The work presented in this paper aims at providing a better understanding of the mechanical response of surface layer fibreglass-reinforced flexible pavements. The surface reinforcement technique consists of installing a fibreglass grid in between the levelling layer (placed on the base course to seal and level the pre-existing distresses) and the wearing course (or overlay). Flexural fracture tests were performed on two-layered reinforced asphalt specimens composed of both levelling and wearing courses to simulate a real overlay structure. Three fibreglass grids characterised by different mechanical and/or geometrical properties were employed. Strain localisation and damage distribution were investigated using an in-house digital image correlation system capable of achieving highly accurate 2D full-field strain maps of the specimens during loading. Finally, an analytical model was developed on purpose to reproduce the mechanical response of the asphalt mixture-interlayer system.     

Physical properties of transparent conducting Cd–Te–In–O thin films: Outlining a thermodynamic system for transparent conducting oxides

Cd–Te–In–O thin films are grown by pulsed laser deposition using a composite target of CdTe powder embedded in an indium matrix. Oxygen pressures range from 2.00 to 6.67 Pa at a substrate temperature of 420 °C. The structure, optical transmission and sheet resistance of the films are measured. Substitutional compounds with In_2 − 2x(Cd,Te)_2xO₃ stoichiometry are found at high oxygen pressures. A ternary phase diagram of the CdO–In₂O₃–TeO₂ system shows the relationship between the structure and the stoichiometry of the films. To evaluate film performance, a figure of merit is proposed based on the relationship between the integral photonic flux and the sheet resistance. The best figure of merit values corresponds to a sample prepared at 3.8 Pa O₂ that consists of (In₂O₃)_0.3(CdTe₂O₅)_0.7 and exhibits an optical band gap of 3.0 eV. This sample is a suitable substrate for electrodeposition due to its good electrochemical stability.     

Effect of the purity of CdTe starting material on the impurity profile in CdTe/CdS solar cell structures

We have investigated CdTe/CdS/In₂O₃:F/glass solar cell structures using quantitative SIMS for profiling the impurity distribution from the CdTe free surface through to the glass substrate. Ion implanted CdTe standards were used. The effect of the purity of the CdTe starting material was determined by studying two structures grown from 7N and 5N source materials. Particular emphasis was placed on the potentially electrically active impurities that may originate from the CdTe starting material, and are likely to affect the CdTe/CdS solar cell performance. It was shown that Cu, Zn, Sn, Sb and Pb profiles had the same level and shape in the CdTe layer regardless of the purity of the starting material used, and were therefore not originating from the starting material. Cl, O, Na and Si showed higher levels for structures grown using 5N purity CdTe compared to those from 7N, and may, at least in part, be due to the CdTe starting material used. It was also postulated that at least some impurities (in addition to Cl) may partially come from the CdCl₂ treatment, and/or from the TCO (In) and glass (for Si and Na). Te and S interdiffusion at the CdTe/CdS interface was also shown to be enhanced when 5N CdTe source material is used as compared to 7N.     

Manufacturing of CdTe thin film photovoltaic modules

The technology to fabricate CdTe/CdS thin film solar cells can be considered mature for a large-scale production of CdTe-based modules. Several reasons contribute to demonstrate this assertion: a stable efficiency of 16.5% has been demonstrated for 1 cm² laboratory cell and it is expected that an efficiency of 12% can be obtained for 0.6 × 1.2 m² modules; low cost soda lime float glass can be used as a substrate; the amount of source material is at least 100 times less than that used for single crystal modules and is a negligible part of the overall cost. The fabrication process can be completely automated and a production yield of one module every 2 min can be obtained, which implies a production cost substantially less than 1€/W_P. A further cost reduction will render this kind of energy production competitive with the energy obtained from fossil fuels by approaching the so-called grid-parity. Some new companies have recently announced the start of production or plan to do so in the near future. Many of these plants are located in Germany, some in the USA. In Italy, a new company has been constituted in 2008, with the aim of building a factory with a capacity of 18 MW/year. In this article, we will describe and compare the basic principles of CdTe solar cells and modules. We will include an overview of the potentials of these technologies and of the R&D issues under investigation. This paper describes how the large-area mass production of CdTe solar modules is realized in the Italian factory and presents a worldwide overview of the current production activities.     

Luminescent Mononuclear and Dinuclear Iridium(III) Cyclometalated Complexes Immobilized in a Polymeric Matrix as Solid-State Oxygen Sensors

Oxygen quenching of the luminescence of mononuclear and dinuclear Ir(III) cyclometalated complexes immobilized in the pPEGMA matrixes has been studied. Linear Stern-Volmer plots, even when experiments at different emission wavelengths have been performed, were evidenced. Despite the different luminescence lifetimes of the chromophores in the absence of quencher, similar Stern-Volmer slopes have been calculated. This behavior was tentatively interpreted by taking into account the size and charge of the chromophores. Increased sizes and lower charges seem to enhance the sensitivity of the systems. Such findings could be of interest for the design of new solid-state luminescent oxygen sensors with improved performance.     

Mechanisms of insulin resistance in experimental hyperinsulinemic dogs

The aim of this work was to identify which proteins in horse dander extracts are allergens and to characterise them. Two-dimensional PAGE showed that horse dander preparations are composed of up to 50 proteins, all having acidic isoelectric points in the pH range 3-4.5. Immunoblots of two-dimensional PAGE were used to compare the reactivity of the proteins with IgE from 23 allergic patients. Patient sera were divided into two main groups recognising either allergens of 18.5 kDa or proteins of 27-29 and 31 kDa. The proteins of 27-29 kDa and 31 kDa were all N-glycosylated and their glycan chains seem to play a role in the binding of IgE from allergic patients. The sugar composition of their carbohydrate moiety was determined and lectin-binding experiments indicated presence of terminal sialic acid linked alpha-(2-->6) to galactose, galactose linked beta-(1-->4) to N-acetylglucosamine, and possibly presence of sialic acid linked alpha-(2-->3) to galactose. The 27-29-kDa glycoproteins had heterogeneous isoelectric points, most probably due to different degrees of sialylation in their oligosaccharide chains. The two 18.5-kDa allergens exhibited slightly different isoelectric points and their N-terminal sequences were identical, showing that they most likely were isoforms of the same protein. Sequence analyses revealed that their N-terminal sequences are similar to proteins belonging to the lipocalin family. We named the two 18.5-kDa proteins Equ c 2.0101 and Equ c 2.0102, according to International Allergen Nomenclature recommendations [King, T. P., Hoffman, D., Lowenstein, H., Marsh, D. G., Platts-Mills, T. A. E. & Thomas, W. (1995) J. Allergy Clin. Immunol. 96, 5-14]. The N-terminal of the allergens of 27-29 kDa were blocked and their sequences were not determined. Their amino acid compositions were determined and comparison with acidic mammalian proteins in the Swiss-Prot database revealed high scores with lipocalin proteins. This suggests that the glycosylated horse dander allergens belong to the lipocalin family, like Equ c 2.0101 and Equ c 2.0102.