A systematic design method to obtain broadband characteristics for singly-fed electromagnetically coupled patch antennas for circular polarization

We present a systematic, empirical design technique to obtain optimum broadband impedance, axial-ratio (AR) and gain bandwidths for a singly-fed electromagnetically coupled patch antenna for circular polarization. Our investigation has also revealed tradeoffs amongst obtainable AR, impedance bandwidth and AR bandwidth. Using two design examples at different frequency bands and for different senses of circular polarization, we have demonstrated the effectiveness of the proposed knowledge-based tuning method. We have obtained at C-band measured values of impedance bandwidth (VSWR/spl les/2) equal to 43%, 3-dB AR bandwidth of 8%, AR of less than 0.3 dB and a mean gain level of 7 dB. For the Ku-band element, a 40% impedance bandwidth and a 17.3% of 3-dB AR bandwidth have been obtained with a peak gain of 7.2 dBic.     

Post-Event Rumination and Negative Self-Appraisal in Social Phobia Before and After Treatment.

This study investigated the relationship between self-appraisals of performance, symptom severity and post-event rumination in social phobia, and evaluated the effect of treatment on these variables. A socially phobic group and a nonanxious control group performed an impromptu speech and were told that their performance would be evaluated. Participants appraised their performance immediately after the speech and 1 week later, and the frequency of post-event rumination during the week following the speech was assessed. The socially phobic group maintained the negative appraisals of their speech over the week, whereas the nonclinical group showed increased positivity about their performance The socially phobic group also engaged in more negative rumination than controls. Treatment improved perceptions of performance and reduced negative rumination. These results are discussed in the light of cognitive models of social phobia. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Proton-exchanged LiNbO/sub 3/ optical waveguides using stearic acid

Proton-exchanged optical waveguides have been fabricated in z-cut LiNbO/sub 3/ using a new proton source: stearic acid. These waveguides were characterized optically and were found to exhibit a step index profile with Delta n=0.118 measured at 0.633 mu m. The propagation losses were typically around 1.5 dB/cm, and the diffusion constant and the activation energy for the proton-exchange process were measured to be 5*10/sup 6/ mu m/sup 2//h and 69 kJ/mol, respectively.<>     

Spectral characteristics of vertical-cavity surface-emitting lasers with external optical feedback

The measurement of the effects of external optical feedback on the spectra of VCSELs (vertical-cavity surface-emitting lasers) is reported. It is surprising that VCSELs have a sensitivity to optical feedback comparable to that of conventional edge-emitting lasers such as DFBs despite their significantly different structures. This is because the extremely short cavity length of VCSELs negates the effects of their highly reflective output mirrors. As in edge-emitting lasers, VCSELs exhibit well-defined regimes of feedback effects in their spectra. Since optical isolators cannot be easily applied to VCSELs due to their array structure, these lasers may be most useful in applications which are not sensitive to the spectral qualities of the light source.<>     

Baseline Determination in Construction Labor Productivity-Loss Claims

Various ways of quantifying damages have been applied to productivity loss claims in construction. All of the ways attempt to be as objective as possible based on the extent of information available in a particular case. The measured mile, a widely accepted method, is employed when an unimpacted baseline period of production can be identified. Although that approach is considered to be the most objective method available in such cases, the method is limited and does not directly account for variation in individual productivity values about a normal or natural level of productivity. A gap exists between the use of existing methods and the availability of an appropriate methodology that specifically addresses variation in productivity. The key lies in the way baseline productivity is measured, which is inherently statistical, yet no truly statistical methods are used to establish such a baseline. Using the measured mile as a backdrop, this article provides an objective, measurement-based approach that can be used to establish a productivity baseline applied to construction productivity loss claims, based on the application of statistical methods aided by a process control chart. The focus is on providing the basic principles and concepts underlying the approach presented.     

p53 protein expression in extrahepatic bile duct cancer

p53 mutations, a tumor suppressor gene located on chromosome 17p, are the most common genetic alterations found in human cancers. Although the p53 expression or mutation has been investigated in a variety of cancers there have been very few studies in extrahepatic bile duct cancers. In this study, we investigated the immunohistochemical expression of p53 in formalin fixed paraffin embedded archival specimens of 36 extrahepatic bile duct cancers in which p53 expression was found in eighteen (50%) cases. There was no significant difference in age, gender, size of tumor, histologic grade, extent of tumor involvement, lymph node metastasis and tumor resectability according to p53 immunoreactivity. Comparison of survival duration according to p53 expression showed no significant difference. In conclusion, we reported 50 percent of p53 expression in extrahepatic bile duct cancers by immunohistochemical staining and we found no prognostic significance of p53 expression in dinicopathologic parameters.     

A novel technique for profiling the lateral n- dopingconcentrations of submicron LDD MOS devices

This paper reports a simple I-V method for the first time to determine the lateral lightly-doped source/drain (S/D) profiles (n^- region) of LDD n-MOSFETs. One interesting result is the direct observation of the reverse-short-channel effect (RSCE). It is observed that S/D n^- doping profile is channel length dependent if reverse short-channel effect exists as a result of the interstitial imperfections caused by Oxide Enhanced Diffusion (OED) or S/D implant. Not only the lateral profiles for long-channel devices but also for short-channel devices can be determined. One other practical application of the present method for device drain engineering has been demonstrated with a LATID MOS device drain engineering work. It is convincible that the proposed method is well suited for the characterization and optimization of submicron and deep-submicron MOSFETs in the current ULSI technology     

Stress analysis of a cantilevered fixed partial denture with normal and reduced bone support

A two-dimensional finite element model was constructed to analyze the simulated mechanical behavior of a cantilevered fixed partial denture. The variations of the models were made by altering the degree of bone support, the number of splinted abutments, and the length of the pontics. High stress concentrations were observed around the connectors of the fixed prosthesis and the tooth closest to the cantilever. Reduced bone support increased the deflection and stress concentrations. There was reduction in displacement and stress concentration when the teeth were splinted together. To improve the prognosis of the fixed partial denture cantilever, the number of abutments should be increased and the number of pontics decreased.     

A greedy algorithm to determine the number of transporters in a cyclic electroplating process

This paper presents a local optimization algorithm for minimizing the number of transporters required for material handling in a cyclic processing line. Within a cycle, a given set of transportation operations must be performed. Each operation consists of picking up a work-in-process job at a stage and delivering it to the next stage. The length of time that a job can remain at a particular stage is restricted by a time window. The transporters that perform the operations move on a shared track, and traffic collisions must be avoided during their movements. To avoid traffic collisions, the operations are partitioned into groups, where each group is served by a single transporter. A local optimal solution is obtained when the group sizes are maximized. We show that the duals of the linear programming subproblems formulated in the process of maximizing the group sizes are specially structured shortest-path problems. This leads to an effective search method for the maximization problem. Conditions when die proposed algorithm achieves die global optimal solution are discussed. The algorithm's performance is evaluated on both randomly generated test problems and benchmark problems.     

Magnetic properties of nickel filament polymer-matrix composites

The magnetic properties of polyethersulfone-matrix composites with 3-19 vol.% polycrystalline nickel filaments (0.4 (im diam) were investigated. These filaments were found to exhibit hysteresis energy loss 10800 J/m³ of nickel and coercive force 16.9 kA/m, compared to corresponding values of 4930 J/m³ and 4.7 kA/m for 2 μ.m diam polycrystalline nickel fibers, 1020 J/m³ and 0.5 kA/m for 20 μm diam polycrystalline nickel fibers, and 1280 J/m³ and 2.3 kA/m for solid polycrystalline nickel.