Microstructure and mechanical properties of ternary mortars with brick powder,glass powder,slag, fly ash,and limestone

The objective of this research is to study the effects produced by ternary binders which combine the addition of waste brick powder with fly ash, limestone, ground granulated blast furnace slag or waste glass powder in the microstructure and mechanical properties of mortars. In these ternary binders, the ordinary Portland cement was partially replaced by 10% of waste brick powder and 10% of another of the abovementioned additions. Mortars prepared with ordinary Portland cement without additions were also prepared. The microstructure was characterized with mercury intrusion porosimetry, electrical resistivity, and thermogravimetric analyses. Ultrasonic pulse velocity, compressive and flexural strengths were also determined. Mortars made using ternary binders with two active additions showed higher pore refinement and higher electrical resistivity at 250 days. Furthermore, their compressive strength and ultrasonic pulse velocity were relatively similar or even higher than that noted for reference specimens.     

基于SR7265硬件的虚拟锁相放大器、频谱仪、阻抗计和半导体参数分析仪

锁相放大器是用来测量微弱信号的专用仪器.即使噪音上千倍于被测信号,通过锁相放大器,也能得到精确结果.随着数字信号处理技术在仪器中的应用,可编程仪器变得越来越灵活.结合虚拟仪器的技术,论文通过对SR7265的硬件重新编程,在同一个硬件上实现了虚拟锁相放大器、虚拟频谱仪、虚拟阻抗计和虚拟半导体参数分析仪等等功能.本虚拟仪器采用了4层的逻辑结构.同样的功能也在一个FPGA板上成功地部署.     

Study of thermodegradation and thermostabilization of poly(lactide acid) using subsequent extrusion cycles

The thermomechanical degradation and thermostabilization of poly(lactic acid) (PLA) have been studied using subsequent extrusion cycles under different temperature profiles. Primary and secondary antioxidants were used to avoid degradation process during extrusion. Melt flow index (MFI), size exclusion chromatography (SEC), and infrared spectroscopy (FTIR) analysis were used to evaluate the degradation and stabilization of PLA. The MFI and SEC analysis show that the main thermodegradation mechanism of PLA is governed by scission reactions. FTIR analysis confirmed the SEC results and showed that the synergetic effect between primary and secondary antioxidant is a suitable way to thermostabilize the PLA. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40023.     

Preparation of scratch resistant superhydrophobic hybrid coatings by sol–gel process

Organic–inorganic hybrid coatings on glass substrates with superhydrophobic properties and with improved scratch resistance were obtained by means of applying a multilayer approach including multiple sol–gel processes. The coatings exhibited a water contact angle (WCA) higher than 150°. Ultraviolet (UV)-curable vinyl ester resins and vinyltriethoxysilane (VTEOS) as coupling agent were employed to increase the adhesion between substrate and the inorganic layers. The surfaces were characterized by means of dynamic contact angle and roughness measurements. Indeed, the occurrence of superhydrophobic behavior was observed. The scratch resistance of the hybrid coatings was tested to evaluate the adhesion of the coatings to the glass substrate. The proposed preparation method for scratch resistant, mechanically stable, superhydrophobic coatings is simple and can be applied on large areas of different kinds of substrates.     

The Antimicrobial Peptide Temporin G: Anti-Biofilm,Anti-Persister Activities,and Potentiator Effect of Tobramycin Efficacy Against Staphylococcus aureus

Bacterial biofilms are a serious threat for human health, and the Gram-positive bacterium Staphylococcus aureus is one of the microorganisms that can easily switch from a planktonic to a sessile lifestyle, providing protection from a large variety of adverse environmental conditions. Dormant non-dividing cells with low metabolic activity, named persisters, are tolerant to antibiotic treatment and are the principal cause of recalcitrant and resistant infections, including skin infections. Antimicrobial peptides (AMPs) hold promise as new anti-infective agents to treat such infections. Here for the first time, we investigated the activity of the frog-skin AMP temporin G (TG) against preformed S. aureus biofilm including persisters, as well as its efficacy in combination with tobramycin, in inhibiting S. aureus growth. TG was found to provoke ~50 to 100% reduction of biofilm viability in the concentration range from 12.5 to 100 µM vs ATCC and clinical isolates and to be active against persister cells (about 70–80% killing at 50–100 µM). Notably, sub-inhibitory concentrations of TG in combination with tobramycin were able to significantly reduce S. aureus growth, potentiating the antibiotic power. No critical cytotoxicity was detected when TG was tested in vitro up to 100 µM against human keratinocytes, confirming its safety profile for the development of a new potential anti-infective drug, especially for treatment of bacterial skin infections.     

Self-Assembly and Neurotoxicity of β-Amyloid (21–40) Peptide Fragment: The Regulatory Role of GxxxG Motifs

The three GxxxG repeating motifs from the C-terminal region of β-amyloid (Aβ) peptide play a significant role in regulating the aggregation kinetics of the peptide. Mutation of these glycine residues to leucine greatly accelerates the fibrillation process but generates a varied toxicity profile. Using an array of biophysical techniques, we demonstrated the uniqueness of the composite glycine residues in these structural repeats. We used solvent relaxation NMR spectroscopy to investigate the role played by the surrounding water molecules in determining the corresponding aggregation pathway. Notably, the conformational changes induced by Gly³³ and Gly³⁷ mutations result in significantly decreased toxicity in a neuronal cell line. Our results indicate that G³³xxxG³⁷ is the primary motif responsible for Aβ neurotoxicity, hence providing a direct structure–function correlation. Targeting this motif, therefore, can be a promising strategy to prevent neuronal cell death associated with Alzheimer's and other related diseases, such as type II diabetes and Parkinson's.     

Patterning of worm-like soft polydimethylsiloxane structures using a TiO2 nanotubular array

Patterned polydimethylsiloxane (PDMS) is an important structure for soft lithography. Various materials have been deployed as mold for patterning PDMS. Anodized nanotubular array has been sought after as cost-effective alternative for textured silicon. An array of TiO₂ nanotubes with characteristic diameter ≈140 nm and the length of ≈1.5 microns, created by anodic oxidation of a titanium substrate, was used here as a template for soft PDMS molding. The optimal molding process was developed by a combination of silanization, use of solvent, application of a vacuum, and hydraulic pressing. The silanization was confirmed by Fourier transform infrared spectroscopy and contact angle measurements while the PDMS structure was examined by scanning electron microscope and energy dispersive X-ray spectroscopy. Hydraulic pressing significantly improved the infiltration of PDMS into the pores of nanotubular array resulting in formation of PDMS nanobumps after separation of the polymer from the template. Complete infiltration of PDMS precursor into the cavity of nanotubes was observed on the hydraulic-pressed sample without toluene impurities. The hydraulic-pressed samples exhibited higher adhesion strength than nonpressed ones. The adhesive strength was measured by a simple experimental arrangement, in which the PDMS layer was stuck on a vertical glass surface followed by pulling it downwards.     

Phenylvinilbisquinolines as fluorescent markers in functionalized polypropylene films

Polymer Bulletin - In this work, polypropylene films (PP) and maleic anhydride graft polypropylene (PPgMA) at different concentrations of a photoluminescent dye 2,2′-(1,4-phenylenedivinylene)...     

Where Are We with RPE Replacement Therapy? A Translational Review from the Ophthalmologist Perspective

The retinal pigmented epithelium (RPE) plays a pivotal role in retinal homeostasis. It is therefore an interesting target to fill the unmet medical need of different retinal diseases, including age-related macular degeneration and Stargardt disease. RPE replacement therapy may use different cellular sources: induced pluripotent stem cells or embryonic stem cells. Cells can be transferred as suspension on a patch with different surgical approaches. Results are promising although based on very limited samples. In this review, we summarize the current progress of RPE replacement and provide a comparative assessment of different published approaches which may become standard of care in the future.