Numerical investigation of nitriding of refractory metals (with account of the phase constitution diagrams for metal-gas systems)

A mathematical model of dissolution of gas in a metal is suggested with account of phase formation in accordance with the phase constitution diagram (PCD). The stage-by-stage saturation process to the final product formation is shown for an individual particle, through which a reaction wave passes, depending on the diffusion permeability of the metal and solubility conditions that obey Sieverts's law. The effect of the filtration supply of the oxidant to the reaction zone and the process exothermicity on the course of the process is shown.Institute of Structural Macrokinetics, Russian Academy of Sciences, Chernogolovka, Russia. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 65, No. 4, pp. 447–450, October, 1993.     

Solar/UV-induced photocatalytic degradation of three commercial textile dyes.

The photocatalytic degradation of three commercial textile dyes with different structure has been investigated using TiO(2) (Degussa P25) photocatalyst in aqueous solution under solar irradiation. Experiments were conducted to optimise various parameters viz. amount of catalyst, concentration of dye, pH and solar light intensity. Degradation of all the dyes were examined by using chemical oxygen demand (COD) method. The degradation efficiency of the three dyes is as follows: Reactive Yellow 17(RY17) > Reactive Red 2(RR2) > Reactive Blue 4 (RB4), respectively. The experimental results indicate that TiO(2) (Degussa P25) is the best catalyst in comparison with other commercial photocatalysts such as, TiO(2) (Merck), ZnO, ZrO(2), WO(3) and CdS. Though the UV irradiation can efficiently degrade the dyes, naturally abundant solar irradiation is also very effective in the mineralisation of dyes. The comparison between thin-film coating and aqueous slurry method reveals that slurry method is more efficient than coating but the problems of leaching and the requirement of separation can be avoided by using coating technique. These observations indicate that all the three dyes could be degraded completely at different time intervals. Hence, it may be a viable technique for the safe disposal of textile wastewater into the water streams.     

Analytical Calculation of Large-Scale Deflection of Pulse-Loaded Elliptic Plates

Large deflections of pulse-loaded elliptic and round plates made of hardenable elastoplastic materials are investigated analytically using an energy-based approach. Formulas that are convenient for engineering design have been derived.     

Makespan estimation and order acceptance in batch process industries when processing times are uncertain

Batch process industries are characterized by complex precedence relationships between operations, which renders the estimation of an acceptable workload very difficult. A detailed schedule based model can be used for this purpose, but for large problems this may require a prohibitive large amount of computation time. We propose a regression based model to estimate the makespan of a set of jobs. We extend earlier work based on deterministic processing times by considering Erlang-distributed processing times in our model. This regression-based model is used to support customer order acceptance. Three order acceptance policies are compared by means of simulation experiments: a scheduling policy, a workload policy and a regression policy. The results indicate that the performance of the regression policy can compete with the performance of the scheduling policy in situations with high variety in the job mix and high uncertainty in the processing times. Correspondence to: C.V. Ivanescu     

Mesh data structure selection for mesh generation and FEA applications

The data structure representing a mesh and the operators to create and query such a database play a crucial role in the performance of mesh generation and FE analysis applications. The design of such a database must balance the conflicting requirements of compactness and computational efficiency. In this article, 10 different mesh representations are reviewed for linear tetrahedral and hexahedral meshes. A methodology for calculating the storage and computational costs of mesh representations is presented and the 10 data structures are analysed. Also, a system for ranking different data structures based on their computational and storage costs is devised and the various mesh representations are ranked according to this measure. Copyright © 2002 John Wiley & Sons, Ltd.     

Tunneling spectroscopy of palladium-barium emitters

The surface of a palladium-barium cathode was studied using scanning probe microscopy techniques. Data from the tunneling spectroscopy showed the pattern of the electron work function distribution over a microscopic region on the emitter surface. This pattern is compared to the distribution of various phases in the palladium-barium alloy employed.     

General geotechnical concept of tunnel construction in Lefortovo (Moscow) and measures taken to protect historical buildings from deformation

A general concept is cited for the design of an underground transportation tunnel in the Lefortovo District. Attention is focused on problems of the tunnel's layout in plan and profile, the layout of sections, and selection of the driving technology. Results are presented for the numerical modeling of variations in the stress—strain state of the soil mass, which are associated with the tunnel's installation. A set of measures to protect existing architectural monuments is proposed. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 2, pp. 17–21, March–April, 1998.     

Structure and properties of porous silicon obtained by photoanodization

The results of an investigation of layers of porous silicon (PS), which was obtained by electrochemical etching of p-Si under different illumination conditions — natural light, incandescent light, and light from a mercury lamp with and without a filter — are reported. The structure of the layers was studied by double-crystal x-ray diffractometry, the composition was monitored by means of the IR absorption spectra, and the radiative properties were monitored according to the photoluminescence (PL) spectra. It was established that electrochemical etching under illumination produces PS with a higher porosity and more intense PL whose maximum is shifted into the short-wavelength region. These changes are accompanied by a large disordering of the structure and an increase in the oxygen content in the layer. It is concluded that illumination accelerates the chemical interaction of PS with the electrolyte due to oxidation. High-porosity porous silicon stored in air exhibits quenching of PL. Conversely, PL is excited in layers with a lower porosity. Aging of PS is characterized by an increase in the microdeformation of the layers, a decrease in the crystallite sizes with a partial loss of coherence between the crystallites and the substrate, and an increase in the fraction of the amorphous phase. Fiz. Tekh. Poluprovodn. 31, 1261–1268 (October 1997)     

Diurnal thermal cycling effects on microwave signatures of thin seaice

To investigate effects of diurnal thermal cycles on C-band polarimetric backscatter and millimeter-wave emission from sea ice, the authors carried out a winter experiment at the outdoor geophysical research facility (GRF) in the cold regions research and engineering laboratory (CRREL), the ice sheet grew from open sea water to a thickness of 10 cm in 2.5 days, during which they took polarimetric backscatter data with a C-band scatterometer, interlaced with brightness temperature measurements at 90 GHz in conjunction with meteorological and sea ice characterizations. The initial ice growth in the late morning was slow due to high insolation. As the air temperature dropped during the night, the growth rate increased significantly. Air temperature changed drastically from about -12 to -36°C between day and night, the diurnal thermal cycle repeated itself the next day and the growth rate varied in the same manner. Ice temperature profiles clearly show the diurnal response in the ice sheet with a lag of 2.5 h behind the time of the maximum short-wave incident solar radiation. The diurnal cycles are also evident in the millimeter-wave brightness temperature data, measured sea ice backscatter revealed substantial diurnal variations up to 6 dB with repeatable cycles in synchronization with the temperature cycles and the brightness temperature modulations, the diurnal cycles in backscatter indicate that the dominant scattering mechanism related to thermodynamic processes in sea ice is reversible, a diurnal backscatter model based on sea ice electrodynamics and thermodynamics explains the observed diurnal signature. This work shows that diurnal effects are important for inversion algorithms to retrieve sea ice geophysical parameters from remote sensing data acquired with a satellite synthetic aperture radar (SAR) or scatterometer on Sun-synchronous orbits