Parameter Uncertainty and Policy Intensity: Some Extensions and Suggestions for Further Work

The effects of parameter uncertainty on optimal policy have been a matter of interest for academics, and even for some policymakers, for a long time. Two lines of literature have developed analytical results on this matter. The first line uses static models and the second dynamic models. In this dynamic line most of the results are confined to models with a single state and a single control variable. In this paper we want to encourage the analysis of more general dynamic cases. To do so, the results in the dynamic line are extended from one-state and one-control finite horizon models to models with a pair of control variables. We then discuss some of the hurdles which must be surmounted for the results to be made more general and suggests some lines for further research. JEL classification: C61; E61     

Processing of Yttria-Alumina Coated Silicon Nitride Slips by Slip Casting

Si₃N₄powders coated with 6 wt% Y₂O₃and 4 wt% Al₂O₃were prepared by coprecipitation. The resulting powders were dispersed in water at different pH values and with addition of various amounts of ammonium polyacrylate (NH₄PA) to produce 32 vol% slips. The influence of the amount of NH₄PA solution added and pH on the rheological properties of 32 vol% coated Si₃N₄slips were studied. In addition, the sintered density of cast samples was determined and related to the degree of slip dispersion. The adsorption of the NH₄PA on the coated particle surface was rather high and the surface became saturated near 0.86 mg/m²at pH 9.2. High NH₄PA concentrations (1.7–3 wt%) were necessary to obtain well dispersed 32 vol% coated Si₃N₄slips at pH 9.2. The best stabilization was obtained with the addition of 2.3 wt% NH₄PA; in this condition, the viscosity reached a minimum value of 35 mPa.s at 100 s^–1. The slip viscosity increased with increasing pH from 9.2 to 10.2. Slips with low viscosities gave a more dense packing of cast samples and consequently higher sintered density values.     

Hepatitis B virus infection, hepatitis B vaccine, and hepatitis B immune globulin

Hepatitis B virus (HBV) infection is a major health problem in the United States; in 1995, approximately 128,000 cases occurred. Transmission of HBV occurs primarily by blood exchange (eg, by shared needles during injection drug use) and by sexual contact. Persons infected early in life are much more likely to become chronically infected than those infected during adulthood: as many as 90% of infants infected perinatally develop chronic infection and up to 25% will die of HBV-related chronic liver disease as adults. Clinical signs of acute hepatitis occur in about 50% of infected adults but in only 5% of infected preschool-aged children. In the United States, hepatitis B vaccine is currently made by recombinant DNA technology using baker's yeast. Preexposure vaccination results in protective antibody levels in almost all infants and children (> 95%) and healthy adults younger than 40 years of age (> 90%). The most common adverse event following administration of hepatitis B vaccine is pain at the injection site, which occurs in 13% to 29% of adult and 3% to 9% of children. A comprehensive hepatitis B vaccination policy is now recommended that includes (1) routine infant vaccination; (2) catch-up vaccination of 11- to 12-year-olds who were not previously vaccinated; (3) catch-up vaccination of young children at high risk for infection; (4) vaccination of adolescents and adults based on lifestyle or environmental, medical, and occupational situations that place them at risk; and (5) prevention of perinatal HBV infection.     

Stable neurovisual servoing for robot manipulators

In this paper, we propose a stable neurovisual servoing algorithm for set-point control of planar robot manipulators in a fixed-camera configuration an show that all the closed-loop signals are uniformly ultimately bounded (UUB) and converge exponentially to a small compact set. We assume that the gravity term and Jacobian matrix are unknown. Radial basis function neural networks (RBFNNs) with online real-time learning are proposed for compensating both gravitational forces and errors in the robot Jacobian matrix. The learning rule for updating the neural network weights, similar to a back propagation algorithm, is obtained from a Lyapunov stability analysis. Experimental results on a two degrees of freedom manipulator are presented to evaluate the proposed controller.     

High‐pressure processing effects on the mechanical,barrier and mass transfer properties of food packaging flexible structures: a critical review

Food products can be high‐pressure processed (HPP) either in bulk or prepackaged in flexible or semi‐rigid packaging materials. In the latter case the packaging material is subjected, together with the food, to high‐pressure treatment. A number of studies have been performed to quantify the effects of high‐pressure processing on the physical and barrier properties of the packaging material, since the integrity of the package during and after processing is of paramount importance to the safety and quality of the food product. This article reviews the results of published research concerning the effect of HPP on packaging materials. Copyright © 2004 John Wiley & Sons, Ltd.     

Modelling and experimental investigation of devolatilizing wood in a fluidized bed combustor

A two-dimensional model is developed for the determination of devolatilization time and char yield of cylindrical wood particles in a bubbling fluidized bed combustor. By using the concept of shape factor, the model is extended to particles of cuboid shape. The model prediction of the devolatilization time agrees with the measured data (present and those reported in the literature) for cylindrical and cuboidal shaped particles within ±20% while the char yield is predicted within ±17%. Influence of some important parameters namely, thermal diffusivity, external heat transfer coefficient and shrinkage, on the devolatilization time and char yield are studied. Thermal diffusivity shows noticeable influence on devolatilization time. The external heat transfer coefficient shows little influence beyond a value of 300 W/(m² K). However particle shrinkage shows negligible effect on the devolatilization time but has a significant influence on the char yield.     

Aqueous tape casting of yttria stabilized zirconia

Tape casting process was used to produce yttria stabilized zirconia (YSZ) substrates in an aqueous system with poly(vinylalcohol) (PVA) and glycerine as binder and plasticizer, respectively. Various compositions of YSZ slips with different amounts of PVA and glycerine and consequently different solid/liquid ratios were prepared. The influence of the slip composition on the rheological properties of the slips was studied. In addition, the effect of the slip composition on the properties of the green and sintered tapes was investigated. PVA and glycerine did not affect the dispersion properties of the YSZ powder. Glycerine additions enhanced the flexibility of the green tapes but also produced a decrease in the tensile strength. The increase in the PVA content increased the tensile strength but resulted in a markedly decrease in the green density of the tapes. A correlation between the green and sintered density was found. The anisotropic sintering shrinkage parallel and perpendicular to the casting direction increased with increasing the PVA content. The slip compositions with 5 wt% PVA produced green tapes with satisfactory tensile strength. They had the highest sintered density, the lower sintering shrinkage and the lesser shrinkage anisotropy.     

Parallel Computation of High-Dimensional Robust Correlation and Covariance Matrices

The computation of covariance and correlation matrices are critical to many data mining applications and processes. Unfortunately the classical covariance and correlation matrices are very sensitive to outliers. Robust methods, such as Quadrant Correlation (QC) and the Maronna method, have been proposed. However, existing algorithms for QC only give acceptable performance when the dimensionality of the matrix is in the hundreds; and the Maronna method is rarely used in practice because of its high computational cost. In this paper we develop parallel algorithms for both QC and the Maronna method. We evaluate these parallel algorithms using a real data set of the gene expression of over 6000 genes, giving rise to a matrix of over 18 million entries. In our experimental evaluation, we explore scalability in dimensionality and in the number of processors, and the trade-offs between accuracy and computational efficiency. We also compare the parallel behaviours of the two methods. From a statistical standpoint, the Maronna method is more robust than QC. From a computational standpoint, while QC requires less computation, interestingly the Maronna method is much more parallelizable than QC. After a thorough experimentation, we conclude that for many data mining applications, both QC and Maronna are viable options. Less robust, but faster, QC is the recommended choice for small parallel platforms. On the other hand, the Maronna method is the recommended choice when a high degree of robustness is required, or when the parallel platform features a large number of processors (e.g., 32).     

Mesenteric venous thrombosis after appendicectomy in a child: clinical case and review of the literature

Mesenteric venous thrombosis (MVT) after appendicectomy has not been reported in the pediatric literature. This complication is associated with significant morbidity and mortality rates in adults. The report of this case attempts to analyze the features found in an appendicectomized child documented by radiological examination and surgery before and after starting heparin therapy. Anticoagulation treatment should be started as soon as possible and continued for a long time to decrease the risk of relapse.