Glandular Trichome Extracts from Medicago sativa Deter Settling by the Potato Leafhopper Empoasca fabae

Extracts of glandular trichomes from Medicago sativa were tested for their ability to disrupt the settling behavior of the potato leafhopper, Empoasca fabae. Erect and procumbent glandular trichomes were mechanically isolated from stem sections of resistant genotype "G98A," and nonglandular trichomes were collected from susceptible cultivar "Ranger." Isolated trichomes were extracted with chloroform, acetone, and ethanol, and the resulting crude extracts were applied to the surface of a sachet containing an artificial diet. Leafhoppers were offered a two-way choice between crude trichome extracts from G98A and Ranger. All three of G98A solvent extracts caused various degrees of diet rejection, resulting in the crude Ranger trichome extracts being preferred over G98A extracts. Overall, the fewest leafhoppers settled on the ethanolic extracts. Additional bioassays documented a dose response associated with G98A ethanolic extracts when compared with Ranger trichome extracts and a solvent control. No difference in preference behavior was detected between Ranger trichome extracts and a solvent control. Gas chromatography-mass spectrometry analysis revealed a homologous series of nonvolatile fatty acid amides C(n)H(2n+1)NO (n = 19-23) unique to G98A glandular trichome extracts.     

A hybrid,finite element—finite difference approach to simplified large deflection analysis of structures

A new and considerably simplified solution technique for geometrically nonlinear problems is introduced. In contrast to the existing numerical methods, the present approach obtains an approximate large deflection pattern from the linear displacement vector by successively employing updated correction factors. Conservation of energy principle yields a general expression for these subsequent corrections. While the linear portion of the strain energy can be computed using finite element approach, evaluations of its nonlinear counterparts often require mathematical discretization techniques. The simple, self-correcting iterative procedure is unconditionally stable and its fast oscillatory convergence offers further computational efficiency. To illustrate the application of the proposed method and to assess its accuracy, moderately large deflections of beam, plate and flexible cable structures have been computed and compared with known analytical solutions. If required, the obtained results—which are acceptable for most design purposes—can be further improved.     

Polyionic fusion peptides function as specific dimerization motifs

The de novo design of a molecular adapter for directed associationand covalent linkage of two polypeptides is presented. Usingpeptides containing charged amino acid residues and an additionalcysteine residue (AlaCysLys₈ and AlaCysGlu₈) we demonstratethat the electrostatic interaction promotes the associationof two synthetic peptides and, subsequently, disulfide bondformation. The reaction depends on both the redox potentialand on the ionic strength of the buffer. Varying the redox potential,the interaction of the peptides was quantified by a G^0' of 6.6± 0.2 kcal/mol. Heterodimerization of the peptides ishighly specific, a competition of association by other cysteinecontaining compounds could not be observed. Two proteins comprisingcysteine-containing polyionic fusion peptides, a modified Fabfragment and an -glucosidase fusion, could be specifically conjugatedby directed association and subsequent disulfide bond formation.Both proteins retain their functional characteristics withinthe bifunctional conjugate: enzymatic activity of the glucosidaseand antigen-binding capacity of the Fab fragment are equivalentto the non-conjugated components.     

A new removable resist for high aspect ratio applications

A variety of different photo resists are used for fabrication of MEMS. Presently good results were reported for SU-8, a chemically amplified negative tone photoresist. But SU-8 has a disadvantage for some applications in LIGA technique, especially in the X-ray mask fabrication. After processing the finished resist pattern are hardly soluble from the substrate. This paper will briefly describe the current status of the development of the new negative tone photoresist CAR 44 whose big advantage is the easy removableness of the cross linked pattern. This work widely uses the contents of the presentation “A New Removable Resist for High Aspect Ratio Applications” to the High Aspect Ratio Micro Structure Technology workshop HARMST 2005 held in Gyeongyu (Republic of Korea), June 10–13, 2005.     

Filaments for Incandescent Lamps with Energy Conserving Envelopes

The design considerations for filaments in energy conserving incandescent lamps are described. Such lamps require compact high emissivity filaments to absorb infrared radiation reflected from heat mirrored focusing envelopes. The relationships between the electrical parameters in the radiation returning environment and in the clear surroundings are developed. Efficiency experiments with filaments of various geometries under conditions of radiation return were performed. A highly compact coiled coil filament seems most promising for development. A calculation is presented of the filament emissivity as a function of spacing of the windings in a coil. Measurements of the emissivity as a function of the pitch of a coiled coil filament agree with the calculation.     

A systematic approach to the replacement of an aging distributionsystem

Cass County Electric Cooperative (CCEC) provides electric service to all or parts of eight counties in southeast North Dakota. CCEC's rural area customer base has caused some concern in the past, because the number of agricultural-based customers has continued to decline, while the size of those remaining has continued to increase. To compound this situation, these rural area customers are being served by an aging overhead and a prematurely failing underground primary distribution system. Therefore, CCEC will begin systematically replacing its overhead and underground distribution systems to provide customers with safe, reliable, and economical electric energy. The author discusses the planning process, overhead and underground replacement processes, and vacant account analysis     

Ratio of free-to-total prostate specific antigen in serum cannot distinguish patients with prostate cancer from those with chronic inflammation of the prostate

PURPOSE: We demonstrate the effect of chronic inflammation of the prostate on the ratio of free-to-total prostate specific antigen (PSA) in serum calculated as a percentage of free PSA and, therefore, that percentage of free PSA is an unspecific means to distinguish among prostate cancer, chronic prostatitis and benign prostatic hyperplasia (BPH). MATERIALS AND METHODS: Total, free and percentage of free PSA was measured in 66 men with prostate cancer, 119 with BPH and 17 with asymptomatic chronic prostatitis. In all patients the diagnosis was histopathologically confirmed by microscopic examination of prostatic specimens after sextant biopsy, transurethral prostatic resection or prostatectomy. RESULTS: The median values of total, free and percentage of free PSA were 4.11 microg./l., 0.75 microg./l. and 20.4% in patients with BPH, 10.0 microg./l., 0.84 microg./l. and 8.5% in those with prostate cancer, and 7.60 microg./l., 1.23 microg./l. and 10.6% in those with chronic prostatitis. Patients with prostate cancer and chronic prostatitis had a significantly lower percentage of free PSA than those with BPH. Receiver operating characteristics curve analysis showed that percentage of free PSA as a discriminator between prostate cancer and BPH was not suitable for differentiating between prostate cancer and chronic prostatitis. CONCLUSIONS: Chronic prostatitis is not characterized by elevated total PSA concentrations alone but also by a decreased percentage of free PSA, a tendency similar to that in prostate cancer. This unspecific change in percentage of free PSA must be considered to interpret the percentage of free PSA correctly.     

Formation of cBN nanocrystals by He+ implantation into hBN

The structural modifications of polycrystalline hexagonal boron nitride implanted with He⁺ beams at energies between 200 keV and 1.2 MeV to fluences of 1.0 × 10¹⁷ ions cm^? 2 were investigated using micro-Raman spectroscopy. The measured Raman spectra show evidence of implantation-induced structural transformations from the hexagonal phase to nanocrystalline cubic boron nitride, rhombohedral boron nitride and amorphous boron nitride phases. The first-order Longitudinal-Optical cubic boron nitride phonon was observed to be downshifted and asymmetrically broadened and this was explained using the spatial correlation model coupled with the high ion implantation-induced defect density.     

Binding of external ligands onto an engineered virus capsid

The development of novel delivery systems for therapeutic substancesincludes targeting of the carriers to a specific site or tissuewithin the body of the recipient. This can be accomplished byappropriate receptor-binding domains and requires linking ofthese domains to the carrier. We have used recombinantly expressedpolyomavirus-like particles as a model system and inserted thesequence of a WW domain into different surface loops of theviral capsid protein VP1. In one variant, the WW domain maintainedits highly selective binding properties of proline-rich ligandsand showed an increased affinity but also an accelerated association/dissociationequilibrium compared to the isolated WW domain, thus allowinga short-term coupling of external ligands onto the surface ofthe virus-like particles.