Surface Pretreatments of Silicon Nitride for CVD Diamond Deposition

The efficiency of different surface pretreatments (four standard chemical etchings and four diamond powder abrasive procedures) on silicon nitride (Si₃N₄) substrates for chemical vapor deposition (CVD) of diamond has been systematically investigated. Blank Si₃N₄ samples were polished with colloidal silica (∼0.25 μm). Diamond nucleation and growth runs were conducted in a microwave plasma chemical vapor deposition apparatus for 10 min and 6 h, respectively. Superior results concerning nucleation density ( N _d∼ 10¹⁰ cm⁻² after 10 min), film uniformity, and grain size (below 2 μm after 6 h) were obtained for the mechanically microflawed samples, revealing that chemical etchings (hot and cold strong acids, molten base or CF₄ plasma) are not crucial for good CVD diamond quality on Si₃N₄.     

甲基丙烯酸缩水甘油酯的合成

在季铵盐催化作用下 ,甲基丙烯酸与环氧氯丙烷反应生成甲基丙烯酸缩水甘油酯。实验结果表明 ,二步法可获得较高的产率     

蛋白质化学修饰的研究进展

蛋白质分子具有极其复杂的结构层次，用化学修饰的方法研究蛋白质分子的结构与功能的关系一直是生物化学和分子生物学领域的热点。人们研究出许多小分子化学修饰剂并进行了多种类型的化学修饰。综述了蛋白质化学修饰领域的研究现状与水平，同时强调蛋白质的化学修饰是生化药物研究开发的重要手段之一。     

Transformation of Crystal Phase of Micron-sized Rutile TiO2 and Investigation on its Sonocatalytic Activity

The partial transformation of crystal phase of micron-sized TiO₂ powder from rutile to anatase was realized utilizing microwave irradiation in hydrogen peroxide solution. Afterwards, the ultrasound of low power was used as an irradiation source to induce the transition crystal TiO₂ powder to perform the sonocatalytic activity through the degradation of azo fuchsine in aqueous solution. The results show that the sonocatalytic activity of the transition crystal TiO₂ powder is obviously higher than that of pure micron-sized rutile and anatase TiO₂ powders. The degradation ratio of azo fuchsine in the presence of the transition crystal TiO₂ powder attains nearly 80% within 80 min ultrasonic irradiation.     

低温共烧陶瓷技术及其应用

低温共烧陶瓷(low temperature co-fired ceramic,LTCC)技术是实现电子元件小型化、片式化的一种理想的封装技术,已成为电子元件集成的主要工艺方式,引起了人们的广泛关注。本文详细叙述了LTCC技术的特点、LTCC材料体系、国内外发展现状以及LTCC技术在电子元件集成中的应用。认为利用LTCC技术来实现电源、有源和无源器件的一体化将是今后信息功能陶瓷发展的一个重要方向。我国应该抓住LTCC技术所面临的前所未有的发展机遇,大力开发具有自主知识产权的LTCC技术,整体提升我国在电子集成领域的技术水平和国际竞争力。     

聚氯乙烯中杂质粒子的产生原因及解决措施

通过分析聚氯乙烯树脂中杂质粒子产生的主要原因，提出了在采购、保管、生产、清理、分析等环节的解决措施。     

Effect of catalysts in the quality of syngas and by-products obtained by co-gasification of coal and wastes. 1. Tars and nitrogen compounds abatement

The aim of this work is to analyse the possibility of using co-gasification technology to process coal mixed with wastes to take profit of its energy content and at the same time to minimize the environmental impact associated with the use of wastes and to diminish the costs of flue gas treatment. The addition to coal of different types of materials, like: pine based waste, petcoke and polyethylene (PE), was not found to give rise to any operational problems, regarding both the feeding system and gasification process and led to higher energy conversions, however, the gas presented higher tars and hydrocarbons content. Several catalysts were tested, such as, dolomite, olivine, nickel and magnesium oxides, zinc oxides and cobalt and molybdenum oxides. Catalyst action was analysed in tars release and also in ammonia compounds reduction. The presence of catalysts allowed increasing hydrogen release, whilst there was a decrease in hydrocarbons and tars contents. A nickel-magnesium oxide was the catalyst that led to the highest reduction in hydrocarbons and tars. This catalyst also led to the lowest NH₃ content in the fuel gas produced, due to the catalyst efficiency in NH₃ destruction.     

New approach for the preparation of nanoporous polyorganosilicate low‐k films

The distribution of pores and the mechanical properties of materials are the key factors in preparing satisfactory low‐k films. In the present study, a kind of silsesquioxane‐polyethylene glycol (SSQ‐PEG) was synthesized and used as a template to make the distribution of pores more even in the low‐k films. The crosslinking density of films could be adjusted by the sol‐gel of tetramethoxysilane/dimethoxydimethylsilane with various proportions. The porosity of films could also be adjusted with different proportions of pendant PEG chains introduced. A dielectric constant as low as 2.1 had been achieved for nanoporous polyorganosilicate films with good tenacity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1238–1243, 2007     

猪细小病毒PCR检测方法的建立与应用

目的建立猪细小病毒(PPV)PCR检测方法。方法设计一对针对PPV的特异引物,经方阵滴定法确定PCR检测的最佳条件,以多种病毒DNA为模板进行PCR扩增,并对扩增产物进行斑点杂交鉴定。提取已知滴度的病毒培养物DNA为模板,稀释后进行PCR扩增,测定PCR方法的敏感性。采用此方法检测了180份猪各种组织样品的DNA及PPV-猪组织混合感染PK-15细胞模型。结果仅PPV野毒株和北京分离株AV7909能够扩增出一条531bp的片段,测序结果证明为PPV的特异片段。该方法所能检测的最小病毒滴度值为0.398TCID50,可以检测出PPV-猪组织混合感染PK-15细胞模型中0.500 TCID50的感染量。180份组织样品均未检出PPV。结论该方法具有良好的特异性和敏感性。     

颗粒活性炭的特性参数与吸附性能的关系试验

采用活性炭进行饮用水的深度处理,选择适合原水水质的活性炭至关重要,通过6种不同颗粒活性炭特性参数的测试,对饮用水有机物的吸附试验以及吸附等温线的测定,结果表明:针对颗粒活性炭的筛选,碘值,亚甲蓝值,吸附等温线的KF及斜率1/n值均不能单独作为评价筛选活性炭优劣的指标,而应综合考虑颗粒活性炭的孔径分布与原水中有机物的相对分子质量分布相匹配等。研究还表明:碘值,亚甲蓝值,吸附等温线的KF存在一定的相关性,从颗粒活性炭的特性参数和吸附性能参数可以推测活性炭滤柱试验吸附效果。颗粒活性炭用于饮用水深度处理,能去除水中相对分子质量小的有机物,处理的水量为颗粒活性炭体积的4800倍时,对CODMn的去除率为15%左右。