Computational Fluid Dynamics Study on a Top-Blown Smelting Process with Lance Failure in an Isa Furnace

JOM - The Isa/Ausmelt smelting technology with a top submerged lance (TSL) has been extensively used in copper smelting processes. However, the TSL is extremely vulnerable to damage and failure...     

Anchoring single Pt atoms on hollow Ag3VO4 spheres for improved activity towards photocatalytic H2 evolution reaction

The high cost of noble metal catalysts has been a great bottleneck for the catalyst industry. Using the noble metal at a single-atom level for catalytic applications could dramatically decrease the cost. The impacts of single Pt atoms on the photocatalytic performance of Ag₃VO₄ have been investigated and reported. In this report, single Pt atoms were anchored on the surface of Ag₃VO₄ (AVO) as a cocatalyst, and the resultant composite photocatalyst has been studied for photocatalytic H₂ production from water driven by visible light. The as-prepared AVO particles are hollow nanospheres in the monoclinic phase with a bandgap of 2.20 eV. The light absorption edge of AVO/Pt is slightly red-shifted compared to that of the pristine AVO, indicating more visible light absorption of AVO/Pt. The XPS peaks of Ag, V, and Pt exhibit a significant shift after AVO and Pt get into contact, suggesting the strong interaction between the surface Ag and V atoms, and single Pt atoms. After 3-h illumination, the photocatalytic H₂ evolution amount from AVO/Pt is improved up to 1400 μmol, which is 2.8 times that on the bare AVO. Such efficient photocatalytic H₂ evolution on AVO/Pt is still maintained after five reaction cycles. The better photocatalytic performance of AVO/Pt has been attributed to the more efficient visible light utilization and the lower interfacial charge transfer resistance, as demonstrated in the DRS and EIS spectra. The presence of the surface Pt atoms also leads to a higher amount of reactive radicals, which could efficiently promote the surface redox reactions.     

Adaptive fuzzy control for nontriangular form systems with time-varying full-state constraints

This article investigates an adaptive fuzzy tracking control problem for a class of nontriangular form systems with asymmetric time-varying full state constraints. Unknown functions are approximated by the fuzzy logic systems. A domination approach is employed to tackle the nontriangular form structure. Time-varying asymmetric barrier Lyapunov functions (ABLFs) are adopted to ensure full-state constraints satisfaction. Based on the backstepping technique and time-varying ABLFs, an adaptive controller is proposed and guarantees that all the signals in the closed-loop system are ultimately bounded and the time-varying full state constraints are met. Simulation examples are presented to further demonstrate the effectiveness of the proposed approach.     

炼油达标污水回用处理试验研究

采用曝气生物滤池、多介质过滤、超滤、反渗透工艺,对炼油达标外排污水进行回用处理中试试验。结果表明,曝气生物滤池对油、COD和浊度去除效果良好,超滤、反渗透膜化学清洗周期达到 2个月以上,脱盐率稳定在98％以上,产水品质达到回用要求。     

地下输水管网的腐蚀调查

介绍了中国石油天然气股份有限公司大庆石化分公司地下输水管网的腐蚀现状与调查分析情况,提出了对地下输水管网实施以深井阳极地床外加电流阴极保护为主、局部欠保护区辅以镁合金牺牲阳极的阴极保护方案。经分析,采取上述防护措施后,每年可产生2488万元的经济效益。     

甲磺酸铜催化合成草酸二异戊酯

制备了甲磺酸铜催化剂,对其结构进行了IR和热重分析,并用于催化草酸和异戊醇的酯化反应。结果表明,甲磺酸铜具有催化活性高、稳定,易分离,重复使用性能优良,对环境友好的特点。最佳酯化工艺条件为:n(异戊醇):n(草酸)=2．8:1,w(甲磺酸铜)=0．3％,以过量的异戊醇为带水剂,回流反应2．0 h,酯化率可达到96．8％。     

管道风险管理方法研究

按照管道风险管理的流程分别对管道风险评价、风险控制和决策支持、效能测试和响应进行了论述。针对目前国内管道行业的情况，提出了进行管道风险评价的有效方法及维护措施。着重介绍了国外管道风险可接受标准的情况，作为国内制定管道风险评价标准的参考。     

智能动态网络资源分配系统

通过对解决GSM移动通信网络热点区域话务拥塞问题的研究，提出了利用可控功分器实现智能动态网络资源的分配，解决不同种类的话务拥塞问题，并着重讨论了该系统目前的成功运用及前景。     

焊膏印刷工艺参数的选择与优化

表面贴装工艺流程的关键工序之一就是焊膏印刷,其工艺控制的好坏直接影响着装配的线路板的质量。通过对印刷工艺参数的分析,利用试验设计的方法来找出关键工艺参数,并加以优化设定,从而为控制工序参数奠定基础。