快速修复路面的混杂纤维再生混凝土基本力学性能研究

通过计算及试配得到快速修复路面的水泥混凝土配合比,在此基础上配制了不掺加纤维的普通再生混凝土和混掺体积分数为0.15％玄武岩纤维与0.11％聚丙烯腈纤维的再生混凝土,再生骨料取代率及混杂纤维对路面再生混凝土基本力学性能的影响进行实验研究.结果表明:混凝土的各项力学性能基本上随再生骨料取代率的提高而降低;玄武岩与聚丙烯腈混杂纤维可以有效增加再生混凝土的劈裂抗拉强度和抗折强度.     

基于人工神经网络的银行客户流失分析模型

针对目前中国建设银行存在的客户流失问题,利用BP人工神经网络网络稳定、学习能力强的特点,通过输入变量和输出变量之间的相关性分析,建立银行客户流失分析模型,以此获取即将流失的客户,以便银行做出经营决策,挽留有关用户,确保银行效益不受影响。实验证明,此模型能够很好的对银行客户流失进行预测分析。     

OMAPL138和FPGA的合并单元设计方案

提出了一种基于ARM9+DSP双核处理器OMAPL-138和FPGA的合并单元设计方案。给出了该方案的原理框图,以及具体的程序流程图,并在CCS开发环境下完成了软件编程,实现了合并单元按照IEC61850标准规定的格式进行数字量以太网传输。实验结果证明了该设计方案的可行性与正确性,为合并单元的设计提供了一种新的思路。     

Extreme learning machine for regression and multiclass classification

Due to the simplicity of their implementations, least square support vector machine (LS-SVM) and proximal support vector machine (PSVM) have been widely used in binary classification applications. The conventional LS-SVM and PSVM cannot be used in regression and multiclass classification applications directly, although variants of LS-SVM and PSVM have been proposed to handle such cases. This paper shows that both LS-SVM and PSVM can be simplified further and a unified learning framework of LS-SVM, PSVM, and other regularization algorithms referred to extreme learning machine (ELM) can be built. ELM works for the "generalized" single-hidden-layer feedforward networks (SLFNs), but the hidden layer (or called feature mapping) in ELM need not be tuned. Such SLFNs include but are not limited to SVM, polynomial network, and the conventional feedforward neural networks. This paper shows the following: 1) ELM provides a unified learning platform with a widespread type of feature mappings and can be applied in regression and multiclass classification applications directly; 2) from the optimization method point of view, ELM has milder optimization constraints compared to LS-SVM and PSVM; 3) in theory, compared to ELM, LS-SVM and PSVM achieve suboptimal solutions and require higher computational complexity; and 4) in theory, ELM can approximate any target continuous function and classify any disjoint regions. As verified by the simulation results, ELM tends to have better scalability and achieve similar (for regression and binary class cases) or much better (for multiclass cases) generalization performance at much faster learning speed (up to thousands times) than traditional SVM and LS-SVM.     

Dynamics and genetic fuzzy neural network vibration control design of a smart flexible four-bar linkage mechanism

In this paper, a dynamic modeling method and an active vibration control scheme for a smart flexible four-bar linkage mechanism featuring piezoelectric actuators and strain gauge sensors are presented. The dynamics of this smart mechanism is described by the Discrete Time Transfer Matrix Method of Multibody System (MS-DTTMM). Then a nonlinear fuzzy neural network control is employed to suppress the vibration of this smart mechanism. For improving the dynamic performance of the fuzzy neural network, a genetic algorithm based on the MS-DTTMM is designed offline to tune the initial parameters of the fuzzy neural network. The MS-DTTMM avoids the global dynamics equations of the system, which results in the matrices involved are always very small, so the computational efficiency of the dynamic analysis and control system optimization can be greatly improved. Formulations of the method as well as a numerical simulation are given to demonstrate the proposed dynamic method and control scheme.     

Optimal Performance in Tracking Stochastic Signal Under Disturbance Rejection

The analysis method of optimal tracking performance is proposed for multiple‐input multiple‐output (MIMO) linear time‐invariant (LTI) systems under disturbance rejection. An H₂ criterion of the error signal between the output of the plant and the reference signal is used as a measure for the tracking performance. Spectral factorization is applied to obtain the optimal solution of the system tracking error. The explicit expressions are derived for this minimal tracking error with respect to random reference signals under disturbance rejection. It is shown that the nonminimum phase zeros, the zero direction, the unstable poles, the pole direction of a given plant, statistical characteristics of the reference input signal, and disturbance signal have a negative effect on a feedback system's ability to reduce the system error with disturbance rejection. The results show that the optimal tracking performance will further be damaged because of disturbance rejection. Some typical examples are given to illustrate the theoretical results.     

变风量空调系统优化控制策略研究

变风量空调系统是多变量,大滞后、非线性和不确定性的系统,普通的模糊神经网络控制已难以满足其多变量动态控制的要求,为改善变风量空调系统控制性能,本文提出了一种小波模糊神经网络预测控制方法,实现变风量空调的温湿度有效控制.通过小波神经网络预测器在线建立被控对象的数学模型,并用模糊RBF神经网络控制器对所得到的信息在线修正,优化控制器参数,从而改善系统的控制效果.仿真结果表明,小波模糊神经网络预测控制具有很强的鲁棒性和自适应能力,控制精度高,控制效果好,安全可靠等优点,具有广泛的应用价值.     

基于内容的静态语义概念视频检索方法研究

本文针对互联网视频检索技术的发展,阐述了目前主流视频搜索引擎的技术现状,分析了互联网视频检索的关键技术,特别是对于视频特征的提取技术。本文的创新点是提出了一种通用的基于内容的静态语义视频检索方法,该方法可以弥补基于文本视频检索的有关不足,并且在TRECVID的视频概念检索数据的静态语义概念中得到验证,运行稳定。     

天然沸石与纳滤组合工艺处理铜突发污染的应用

纳滤工艺被广泛应用于分散式饮用水深度处理,能解决饮用水苦咸化,盐碱化或微污染等常规水处理工艺无法规避的用水风险,在长时间运行过程中还能有效应对重金属等突发污染风险。但重金属污染易加重纳滤膜污染,需要增设预处理装置加以缓冲,实现纳滤装置的长久稳定运行。而天然沸石具有良好的筛分性能和吸附性能,能够有效缓冲重金属对纳滤装置的冲击。试验以重金属铜为例,证明水中铜离子会造成纳滤不可逆污染比例增加,不利于系统稳定运行;天然沸石对铜离子有很好的吸附效果,静态吸附试验表明天然沸石对水中铜离子的最大吸附量为3.03 mg/g,通过正交试验合理设计吸附预处理,能够有效为纳滤工艺提供安全进水,保证纳滤进水铜离子浓度低于10 mg/L。实践工艺中,吸附预处理能有效缓解纳滤膜不可逆污染,而且吸附-纳滤组合工艺对铜离子及部分其他重金属离子表现出良好的处理效果。     

考虑客户画像和能量枢纽的配电网多目标抢修重构模型

随着大规模风电以及能量枢纽接入配电网,配电网故障后抢修重构面临新挑战,提出一种考虑客户画像和能量枢纽的配电网多目标多故障抢修重构模型。通过对配电网用电客户多因素精准画像,确定权重,建立兼顾客户画像和能量枢纽的配电网多目标抢修重构模型,提出一种改进NSGA-II算法以适应对模型求解,从而获得Pareto解集,并利用模糊最大满意度进行决策。算例仿真表明所提模型正确有效,与传统模型相比更加精细而客观。