Micromorphological characterization of zinc/silver particle composite coatings

The aim of this study was to evaluate the three‐dimensional (3D) surface micromorphology of zinc/silver particles (Zn/AgPs) composite coatings with antibacterial activity prepared using an electrodeposition technique. These 3D nanostructures were investigated over square areas of 5 μm × 5 μm by atomic force microscopy (AFM), fractal, and wavelet analysis. The fractal analysis of 3D surface roughness revealed that (Zn/AgPs) composite coatings have fractal geometry. Triangulation method, based on the linear interpolation type, applied for AFM data was employed in order to characterise the surfaces topographically (in amplitude, spatial distribution and pattern of surface characteristics). The surface fractal dimension D_f, as well as height values distribution have been determined for the 3D nanostructure surfaces. Microsc. Res. Tech. 78:1082–1089, 2015. © 2015 The Authors published by Wiley Periodicals, Inc.     

Evaluation of Using LaNi0.6Fe0.4O3–δ Contact Layer Between La0.6Sr0.4FeO3 Cathode and Crofer22APU Interconnect for Solid Oxide Fuel Cells

Interconnect‐cathode interfacial adhesion is important for the durability of solid oxide fuel cell (SOFC). Thus, the use of a conductive contact layer between interconnect and cathode could reduce the cell area specific resistance (ASR). The use of La_0.6Sr_0.4FeO₃ (LSF) cathode, LaNi_0.6Fe_0.4O_3–δ (LNF) contact layer and Crofer22APU interconnect was proposed as an alternative cathode side. LNF‐LSF powder mixtures were heated at 800 °C for 1,000 h and at 1,050 °C for 2 h and analyzed by X‐Ray power diffraction (XRD). The results indicated a low reactivity between the materials. The degradation occurring between the components of the half‐cell (LSF/LNF/Crofer22APU) was studied. XRD results indicated the formation of secondary phases, mainly: SrCrO₄, A(B, Cr)O₃ (A = La, Sr; B = Ni, Fe) and SrFe₁₂O₁₉. Scanning electron microscopy with energy dispersive X‐Ray spectroscopy (SEM‐EDX) and the X‐Ray photoelectron spectroscopy (XPS) analyzes confirmed the interaction between LSF/LNF and the metallic interconnect due to the Cr vaporization/migration. An increment of the resistance of ∼0.007 Ω cm² in 1,000 h is observed for (LSF/LNF/Crofer22APU) sample. However, the ASR values of the cell without contact coating, (LSF/Crofer22APU), were higher (0.31(1) Ω cm²) than those of the system with LNF coated interconnect (0.054(7) Ω cm²), which makes the proposed materials combination interesting for SOFC.     

Small‐Scale Thermal Studies of Volatile Homemade Explosives

Several homemade or improvised explosive mixtures that either contained volatile components or produced volatile products were examined using standard small‐scale safety and thermal (SSST) testing that employed differential scanning calorimetry (DSC) techniques (constant heating rate and standard sample holders). KClO₃ and KClO₄ mixtures with dodecane exhibited different enthalpy behavior when using a vented sample holder in contrast to a sealed sample holder. The standard configuration produced profiles that exhibited only endothermic transitions. The sealed system produced profiles that exhibited additional exothermic transitions absent in the standard configuration produced profiles. When H₂O₂/fuel mixtures were examined, the volatilization of the peroxide (endothermic) dominated the profiles. When a sealed sample holder was used, the energetic releases of the mixture could be clearly observed. For AN and AN mixtures, the high temperature decomposition appears as an intense endothermic event. Using a nominally sealed sample holder also did not adequately contain the system. Only when a high‐pressure rated sample holder was used the high temperature decomposition of the AN could be detected as an exothermic release. The testing was conducted during a proficiency (or round‐robin type) test that included three U.S. Department of Energy and two U.S. Department of Defense laboratories. In the course of this proficiency test, certain HMEs exhibited thermal behavior that was not adequately accounted for by standard techniques. Further examination of this atypical behavior highlighted issues that may have not been recognized previously because some of these materials are not routinely tested. More importantly, if not recognized, the SSST testing results could lead to inaccurate safety assessments. This study provides examples, where standard techniques can be applied, and results can be obtained, but these results may be misleading in establishing thermal properties.     

Small‐Scale Safety Testing of Ammonium Nitrate and Mixtures

Ammonium nitrate (AN), gunpowder (GP), and an ammonium nitrate gunpowder mixture (AN/GP) were studied for impact sensitivity by four laboratories using the drop hammer apparatus. Bruceton and Neyer methods were used as experimental protocols and for data reduction. The results are presented as 50 % probability of reaction (DH₅₀). For AN, the DH₅₀ values are widely varied among the participants, from sensitive to completely insensitive (limit of the equipment), with no real correlation among results. GP and the AN/GP mixture exhibited much more sensitivity overall and were in some cases within statistical values extrapolated from previous studies of RDX. The variability in results for the AN data is attributed to the difficulty in determining a positive reaction event for AN, as detailed by Neyer experiments and photography during positive reactions. Variability in results for the GP and AN/GP mixtures is attributed to equipment environment and detection criteria. This work was performed by the Integrated Data Collection Analysis (IDCA) program, a multi‐laboratory effort to standardize safety testing of improvised or homemade explosives funded by the Department of Homeland Security.     

Project management deployment: The role of cultural factors

This paper investigates the role of cultural factors as possible partial explanation of the disparity in terms of project management deployment observed between various studied countries. The topic of culture has received increasing attention in the management literature in general during the last decades and in the project management literature in particular during the last few years. The globalization of businesses and worldwide Governmental/International organizations collaborations drives this interest in the national culture to increase more and more. Based on Hofstede national culture framework, the study hypothesizes and tests the impact of the culture and development of the country on the PM deployment. Seventy-four countries are selected to conduct a correlation and regression analysis between Hofstede’s national culture dimensions and the used PM deployment indicator. The results show the relations between various national culture dimensions and development indicator (GDP/Capita) on the project management deployment levels of the considered countries.     

Polyfurfuryl alcohol derived activated carbons for high power electrical double layer capacitors

Polyfurfuryl alcohol (PFA) derived activated carbons were prepared by the acid catalysed polymerization of furfuryl alcohol, followed by potassium hydroxide activation. Activated carbons with apparent BET surface areas ranging from 1070 to 2600 m² g⁻¹, and corresponding average micropore sizes between 0.6 and 1.6 nm were obtained. The porosity of these carbons can be carefully controlled during activation and their performance as electrode materials in electric double layer capacitors (EDLCs) in a non-aqueous electrolyte (1 M Et₄NBF₄/ACN) is investigated.Carbon materials with a low average pore size (<∼0.6 nm) exhibited electrolyte accessibility issues and an associated decrease in capacitance at high charging rates. PFA carbons with larger average pore sizes exhibited greatly improved performance, with specific electrode capacitances of 150 F g⁻¹ at an operating voltage window of 0-2.5 V; which corresponds to 32 Wh kg⁻¹ and 38 kW kg⁻¹ on an active material basis. These carbons also displayed an outstanding performance at high current densities delivering up to 100 F g⁻¹ at current densities as high as 250 A g⁻¹. The exceptionally high capacitance and power of this electrode material is attributed to its good electronic conductivity and a highly effective combination of micro- and fine mesoporosity.     

Sunflower oil coating on the nanoparticles of iron(III) oxides

High-temperature solution phase reaction of iron(III)-furoate in sunflower oil, in the presence of trichloroacetic acid and 1,2-hexadecylamine leads to iron(III) oxide (amorphous and γ-Fe2O3) nanoparticles with sizes about 1.3 nm in diameter (method “A”), and about 5.5 nm (amorphous Fe2O3) from the “sunflower oil/oxadiazol” system (method “B”).     

Detection of the adulteration of olive oils by solid phase microextraction and multidimensional gas chromatography

The presence or absence of filbertone in 21 admixtures of olive oil with virgin and refined hazelnut oils obtained using various processing techniques from different varieties and geographical origins was evaluated by solid phase microextraction and multidimensional gas chromatography (SPME–MDGC). The obtained results showed that the sensitivity achievable with the proposed procedure was enough to detect filbertone and, hence, to establish the adulteration of olive oil of different varieties with virgin hazelnut oils in percentages of up to 7%. The very low concentrations in which filbertone occurs in some refined hazelnut oils made difficult its detection in specific admixtures. In any case, the minimum adulteration level to be detected depends on the oil varieties present in the adulterated samples. In the present study, the presence of R- and S-enantiomers of filbertone could be occasionally detected in olive oils adulterated with 10–20% of refined hazelnut oil.     

Study of the oxidative degradation of farmed salmon lipids by means of Fourier transform infrared spectroscopy. Influence of salting

Farmed salmon fillets were dry‐salted for 24 h. Both salted and unsalted samples were submitted to oxidative conditions at 50 °C in an oven with circulating air. Lipids of both samples were extracted daily from aliquots and studied by Fourier transform infrared spectroscopy. The infrared spectra of salmon lipids are similar to those of vegetable edible oils, with differences in the frequency and absorbance of some bands due to their different acyl group compositions. The infrared spectra of salted and unsalted fish lipid samples remain unchanged during a period of time, which is shorter for the salted salmon. After this period, changes in the frequency and absorbance of some bands of the spectrum are observed owing to the presence of oxidation products. Therefore the reduction in the oxidative stability of farmed salmon lipids caused by the dry‐salting process is proved and the usefulness of this technique for studying the oxidative stability of fish lipid samples as well as their oxidation degree is shown. Copyright © 2004 Society of Chemical Industry