Poly (vinyl alcohol) hydrogels for pH dependent colon targeted drug delivery

Oral drug administration is convenient with pH dependent drug delivery system since the drug has to pass through different pH environments in gastro intestinal (GI) tract. The pH dependent swelling/shrinking behavior of hydrogel drug carrier controls the drug release without affecting the function of drug. pH dependent hydrogels of poly (vinyl alcohol) (PVA) were prepared by cross linking with maleic acid (MA). The hydrogels were characterized by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, DSC, porosimetry, SEM, TEM, biocompatibility study and by measuring their swelling behavior in water, simulated gastric fluid (SGF) and intestinal fluid (SIF). Swelling of the hydrogels was found to be highest in SIF (pH: 7.5) and lowest in SGF (pH: 1.2) resembling that required in colon targeted drug delivery systems. Since the swelling behavior of the gel is pH dependent, these hydrogels were studied for colon targeted drug delivery in an in-vitro set-up resembling the condition of GI tract. The ratio of PVA and MA in the hydrogel was varied to study the effect on the drug diffusion rate. For drug delivery study, vitamin B₁₂ and salicylic acid were used as model drugs. The hydrogel, loaded with model drugs vitamin B₁₂ and salicylic acid also demonstrated colon specific drug release with a relatively higher drug release in SIF (pH: 7.5) than that in SGF (pH: 1.2).     

正切型弹性体材料的缓冲包装设计

提出一种利用正切型弹性体材料的力学数据进行缓冲包装结构设计的方法,对这种方法的原理进行详细的理论推导,得出计算缓冲垫结构尺寸的关系式。该关系式简单实用,设计出的缓冲衬垫具有最佳的理论缓冲效率。     

Quantitative Analysis of the Degradation Behavior of Silicon Solar Cell Irradiated by 1 MeV Electron Beams Using Photocarrier Radiometry Combined with Lock-in Carrierography

Silicon solar cells with cover glass irradiated by 1 MeV electron beams at various fluences were investigated using photocarrier radiometry (PCR) combined with lock-in carrierography (LIC, spectrally gated dynamic photoluminescence). The minority carrier transport properties (i.e., minority carrier lifetime τ, diffusion coefficient D, surface recombination velocities S) and the degradation of these properties were studied using PCR. The relative damage coefficient obtained by LIC was consistent with the PCR measurement. The local series resistance of the solar cell before and after irradiation was characterized by LIC. The results showed that the series resistance increased with electron fluences.     

Evaluation of Fatigue Crack Orientation Using Non-collinear Shear Wave Mixing Method

In this paper, a non-collinear shear wave mixing technique is proposed for evaluation of fatigue crack orientation. Numerical analysis of the nonlinear interaction of two shear waves with crack is performed using two-dimensional finite-element simulations. The simulation results show that the nonlinear interaction of the two shears waves with cracks leads to the generation of transmitted and reflected sum-frequency longitudinal waves (SFLW), moreover the propagation direction of reflected SFLW is correlated with the orientation of crack, which can be used for crack orientation evaluation. Non-collinear wave-mixing experiments were conducted on specimens with fatigue crack. The experimental results show that the directivity of the generated SFLW agrees well with the simulation results, and non-collinear shear wave mixing has potential use in fatigue crack orientation evaluation.     

Behavior of square concrete columns reinforced with Prefabricated Cage System

Behavior of normal strength concrete columns reinforced with a new reinforcement, termed Prefabricated Cage System (PCS) is investigated. A total of 16 small-scale PCS and rebar reinforced column specimens were constructed and tested under monotonic axial displacement. The experimental results indicate that the overall behavior of rebar and PCS reinforced specimens are comparable prior to achieving the peak column load. In general, PCS specimens are more ductile and absorb more energy than similar rebar specimens after the peak load is reached. The effect of different parameters, such as the steel tube thickness, number of longitudinal reinforcements, transverse steel spacing, and crossties on the specimens’ strength and deformation capacity are investigated. A confined concrete model is proposed and used to predict the load–displacement response. The theoretical load–displacement relations obtained from the proposed model are compared with those obtained from the Mander et al. (J Struct Eng 114(8):1804–1826, 1988) confinement model.     

Chemical Coupled PEDOT:PSS/Si Electrode: Suppressed Electrolyte Consumption Enables Long‑Term Stability

Huge volume changes of Si during lithiation/delithiation lead to regeneration of solid-electrolyte interphase(SEI)and consume electrolyte.In this article,γ-glycidoxypropyl trimethoxysilane(GOPS)was incorporated in Si/PEDOT:PSS electrodes to construct a flexible and conductive artificial SEI,effectively suppressing the consumption of electrolyte.The optimized electrode can maintain 1000 mAh g^−1 for nearly 800 cycles under limited electrolyte compared with 40 cycles of the electrodes without GOPS.Also,the optimized electrode exhibits excellent rate capability.The use of GOPS greatly improves the interface compatibility between Si and PEDOT:PSS.XPS Ar+etching depth analysis proved that the addition of GOPS is conducive to forming a more stable SEI.A full battery assembled with NCM 523 cathode delivers a high energy density of 520 Wh kg^−1,offering good stability.     

Optimization of abrasive water jet cutting of ductile materials

Full factorial design of experiments was developed in order to investigate the effects of jet pressure, abrasive mixing rate, cutting feed, and plate thickness upon three response variables, surface finish of cutting wear zone, percentage proportion of striation free area, and maximum width of cut. The set of sixteen experiments was performed on each of the following two ductile materials: AISI 4340 (high strength low alloy steel, hardened to 49HRc) and Aluminum 2219. Analysis of Variance (ANOVA) was performed on experimental data in order to determine the significance of effects of different parameters on the performance measures. It was found that cutting feed and thickness were highly influential parameters, while abrasive mixing rate is influential upon surface roughness only. Strong interaction was found between jet pressure and workpiece material. Multi-criteria numerical optimization was performed in order to simultaneously maximize/minimize different combinations of performance measures.     

DCAF: An MPEG-21 Dynamic Content Adaptation Framework

Universal Multimedia Access aims at providing a gratifying end user-experience by either adapting the content, be it static or dynamic, to suit the usage environment or adapting the usage environment, be it client- or server-centric, to suit content. This paper presents our MPEG-21 Dynamic Content Adaptation Framework, acronym DCAF, which uses a fusion of Genetic Algorithms and Strength Pareto Optimality to adapt content in order to suit the usage environment.

基于业务访谈的人机交互界面设计

提出从业务访谈开始,调查人机界面交互设计的方法.从业务访谈策划、访谈中待调查的项目、展示快速原型、在迭代中前进、捕捉需求、写给开发团队等几方面阐述业务访谈中关于人机界面交互部分的具体内容.