Preparation of nanosize Pt clusters using ion exchange of Pt(NH3) 4 2+ inside mesoporous channel of MCM-41

Mesoporous molecular sieve MCM-41 with a Si/Al ratio of 35 was obtained by hydrothermal synthesis using a gel mixture with a molar composition of 6 SiO₂0.1 Al₂O₃1 hexadecyltrimethylammonium chloride 0.25 dodecyltrimethylammonium bromide 0.25 tetrapropylammonium bromide0.15 (NH₄)₂O1.5 Na₂O300 H₂O. The MCM-41 sample was calcined in O₂ flow at 813 K and subsequently ion exchanged with Ca²⁺. A small Pt cluster has been supported on the MCM-41 sample following a procedure using ion exchange of Pt(NH₃) ₄ ²⁺ . The Pt(NH₃) ₄ ²⁺ ion supported on MCM-41 has been activated in O₂ flow at 593 K and subsequently reduced with Fh flow at 573 K, in the same way used for the preparation of a Pt cluster entrapped inside the supercage of zeolite NaY. The resulting Pt cluster supported on the MCM-41 shows hydrogen chemisorption oftotal two H atoms per Pt at 296 K (based on the total amount of Pt) and high catalytic activity for hydrogenolysis of ethane. The chemical shift in¹²⁹Xe NMR spectroscopy of adsorbed xenon indicates that the Pt cluster is located inside the mesoporous molecular sieve.     

Thermal Conductivity/Diffusivity of Silicon Carbide Whisker Reinforced Mullite

The thermal conductivity and diffusivity of silicon carbide whisker reinforced mullite was shown to increase with whisker content. This effect was much greater for vapor-liquid-solid (VLS) whiskers than for rice-hull (RH) whiskers. This suggests that the thermal conductivity for the VLS whiskers was significantly higher than for the RH whiskers. Due to preferred orientation of the whiskers, thermal conductivity and diffusivity of the composite samples exhibited significant anisotropy.     

Studies of lipoproteins and fatty acids in maternal and cord blood of two racial groups in Trinidad

The high mortality rate from coronary heart disease (CHD) among Indians compared to Negroes in Trinidad led us to test plasma lipid profiles to see whether dietary or genetic factors might be involved. There were no interracial differences in the composition of plasma cholesterol ester fatty acids of the tested women and neonates. This finding suggests that dietary fat does not account for the interracial difference in CHD, nor does the cause appear to be due to genetic differences in lipid profiles, as there was no significant difference between values for plasma triglycerides, total cholesterol, high density lipoprotein (HDL) cholesterol, apo-I, apo-II, apo B or cholesterol ester fatty acids in the cord blood of each racial group. Blood samples were collected from 69 nonpregnant and 71 postpartum, fasted Negro and Indian women. Also taken were 71 umbilical cord blood samples. The mean triglyceride level was significantly lower in the Negro nonpregnant and postpartum women than in the Indians. HDL cholesterol and apo-I values were lower in the Indian women. There were no significant differences in the total cholesterol and apo B measurements. The triglyceride values for postpartum women were higher than those of the nonpregnant Negroes and Indians (75% and 47%, respectively), whereas the total cholesterol and HDL cholesterol, apo A-I and apo A-II ranged from 9% to 29% higher in the postpartum women. Apo B was about 40% higher postpartum in both ethnic groups. The high CHD rate of Indians in Trinidad cannot be explained by dietary factors, plasma total cholesterol or fatty acid composition. However, the lower level of HDL cholesterol and plasma A-I could play a role in the higher CHD rate in Indians.     

Photochemical degradation of glassy polyesters of low softening point

The photodegradation of polyesters prepared by the reaction of o-phthalic, adipic, and “dimer” acids with ethylene glycol has been studied. The polyesters softened at temperatures in the range of 25–50°C. Polymer films were irradiated in air by means of a medium pressure mercury lamp and the extent of formation of COOH groups determined by infrared spectroscopy. The films were also irradiated in vacuo and in air by means of a high-pressure mercury lamp, and the volatile products, consisting mainly of carbon monoxide and carbon dioxide, were determined by gas chromatography. The results are interpreted in terms of simultaneous Norrish type I and type II decompositions of the polyesters. The type I process accounts for the formation of carbon monoxide and carbon dioxide in the absence of air. The enhanced yield of carbon dioxide in irradiations performed in air is ascribed to the formation of hydroperoxide which undergoes further photolysis. The type II process accounts for the formation of COOH groups. The photodegradation of these glassy polyesters parallels that of crystalline poly(ethylene terephthalate) and is relatively unaffected by changes in composition of the aromatic polyester.     

Scaling laws and polystyrene networks: a quasi-elastic light scattering study

Randomly crosslinked networks with a range of crosslink densities were prepared by γ-irradiation. Quasielastic light scattering measurements were made on the gels swollen to equilibrium in cyclohexane at 308, 318 and 333 K. The longitudinal osmotic modulus M_os was obtained from the intensity of the dynamically scattered light, and the cooperative diffusion coefficient D_c calculated from the relaxation rate of the autocorrelation function. The concentration dependence of these parameters at the theta temperature was found to be consistent with the scaling predictions, but at higher temperatures where excluded volume conditions prevail, deviations from scaling behaviour were observed. These discrepancies are probably caused by defects in the network structure.     

Length preferences and periodicity in {beta}-strands. Antiparallel edge {beta}-sheets are more likely to finish in non-hydrogen bonded rings

We analysed the length distributions of different types of ß-strandin a high resolution, non-homologous set of 500 protein structures,finding differences in their mean lengths. Antiparallel edgestrands in strand–turn–strand motifs show a preferencefor an even number of residues. This propensity is enhancedif the length is corrected for ß-bulges, which insertan extra residue into the strand. Residues in antiparallel edgeß-strands alternate between being in hydrogen bondedand non-hydrogen bonded rings. Antiparallel edges with an evennumber of residues are more likely to have their final ßresidue in a non-hydrogen bonded ring. This suggests that non-hydrogenbonded rings are intrinsically more stable than hydrogen bondedrings, perhaps because its side chain packing is closer. Therefore,we suggest that a simple way to increase ß-hairpinstability, or the stability of an antiparallel edge strand,is to have a non-hydrogen bonded ring at the end of the strand. Received June 19, 2003; revised October 25, 2003; accepted November 7, 2003     

Orientation effects during the flow of short-fibre reinforced thermoplastics

A study has been carried out to investigate molecular orientation in injection moulded bars of short glass fibre reinforced polypropylene and polyethylene. For the range of fibre concentrations encountered commercially, the fibres do not appear to have any direct effect on the matrix orientation. As the fibre concentration increases, however, the matrix orientation becomes dominated by the orientation of the fibres. These effects are interpreted in terms of current ideas of the rheology of polymer melts during injection moulding and the crystallization of polymers at fibre surfaces.     

Toughening epoxy resins with polyepichlorohydrin

Polyepichlorohydrin (PECH) rubbers were found to toughen epoxy resins based on the diglycidyl ether of bisphenol A (DGEBA) and cured with piperidine. The degree of toughening depends on the molecular weight of the PECH and on the curing temperature. Best toughening was achieved with PECH of the highest nominal molecular weight of 3400 (Hydrin 10 × 2). Hydrin 10 × 1 (nominal molecular weight 1700) did not toughen the epoxy resin unless bisphenol A was also added, whereas Hydrin 10 × 2 toughened it in the absence of bisphenol A. Curing resins containing bisphenol A and Hydrin 10 × 1 at 160°C resulted in a slightly more brittle resin than when cured at 120°C. The effect of PECH rubbers on the T_g, modulus, and hot/wet properties is similar to that of carboxy-terminated butadiene-acrylonitrile rubbers (CTBN). Dynamic mechanical thermal analysis (DMTA) and scanning electron micrographs (SEM) of fractured surfaces show that the PECH separates as a discrete phase during curing. © 1993 John Wiley & Sons, Inc.     

Effects of dietary fiber in Vervet monkeys fed “Western” diets

Male Vervet monkeys (7/treatment) were fed a “Western” diet containing 46.2% calories as fat, 39.8% as carbohydrate and 14.0% as protein. The diet was augmented with 10% cellulose or 10% pectin. A third (control) group of seven monkeys was fed a commercial ration augmented with fruit and bread. After 34 weeks, serum cholesterol levels were elevated significantly in the two test groups compared with the controls but there was no difference between the two fiber-fed groups. Serum triglycerides were unaffected. Liver cholesterol levels were the same in all three groups but liver triglyceride levels were lower in the monkeys fed cellulose. Biliary lipids were similar in all three groups as were the calculated lithogenic indices. The average aortic sudanophilia (percent of total area) in the three groups was cellulose, 10.6±2.5; pectin, 8.1±2.5; and control, 1.1±0.4. One animal in each of the groups fed “Western” diet exhibited an atherosclerotic plaque. The results indicate that there is no difference between pectin and cellulose with regard to their effects on either lipidemia or aortic sudanophilia in Vervet monkeys fed a Western-type diet.