Study of silver electrodeposition in deep eutectic solvents using atomic force microscopy

The electrodeposition of metals in ionic liquids and deep eutectic solvents leads to deposits with significantly different morphologies to those seen with aqueous solutions. The classical methods of fitting amperometric data to nucleation and growth mechanisms do not fit the data well in ionic systems and tend to focus on the short time-scale aspects of nucleation. In the current study, ex-situ AFM was used to model crystallite sizes and distributions by digitising and modelling the images. The deposition of silver from a deep eutectic solvent was chosen as it has been studied by several groups with a variety of techniques. The crystallite size data obtained from AFM and chronoamperometry for long time-scale deposition studies are compared and it is shown that the trends are similar, but there is a discrepancy in the nuclear number density of approximately an order of magnitude. The nuclear number density was found to be consistent with aqueous nucleation studies once differences in concentration and mass transport were accounted for.     

Experiments in optimizing FP

FPOPT, a globally optimizing compiler for FP, was built to study the efficiency of compiling a functional programming language by translating it into an intermediate language and then optimizing that intermediate language. The FPOPT system, the design of the intermediate language and the optimizations performed are described. The relative effectiveness of these optimizations, singly and in combinations, are compared using an instrumented version of FPOPT.<>     

Sol-Gel processing of Nb-doped Pb(Zr,Ti)O3 thin films for ferroelectric memory applications

The ferroelectric properties of Nb-doped PZT thin films prepared by a sol-gel method were evaluated relative to memory device application requirements. Within the range of 0 to 4 mol %, Nb-doping of PZT compositions near the morphotropic phase boundary region (i.e. PZT 53/47) enhanced overall ferroelectric properties by reducing the te-tragonal distortion of the unit cell. A 4 mol % Nb-doped PZT 53/47 thin film (0.26 μm) had a coercivity of 8 V/ μm, a remanence ratio of 0.54, a switchable polarization of 45 μC/cm², and a specific resistivity of 3 x 10⁹ Ω-cm. Nb-doping levels in excess of 5 mol had a detrimental effect on the resulting thin film ferroelectric properties. X-ray diffraction (XRD) analysis of highly doped films showed development of a significant PbO phase accompanied by diffraction line broadening of the perovskite phase. As such, it was postulated that the creation of excessive lead vacancies in the PNZT lattice resulted in PbO accumulation at the grain boundaries which impeded grain growth, and hence, adversely affected ferroelectric switching performance. The fatigue performance of the sol-gel derived thin film capacitor system was a function of switching voltage. At switching fields sufficient to saturate the polarization, the endurance of the thin film capacitor was greater than 10⁹ cycles. Cycling with lower fields reduced endurance values, but in all cases, the switchable polarization decreased linearly with the logarithm of cycles. Nb-doping did not have a significant effect on the fatigue performance.     

Optimized sample preparation for high-resolution AFM characterization of fixed human cells

Atomic force microscopy enables the simultaneous acquisition of high-resolution topographical and biophysical data allowing integrated analysis of cell surfaces during development and pathogenesis, and, critically, can link molecular and biophysical events. Here we used atomic force microscopy to analyse endometrial epithelial cells and neuronally differentiated P19 cells. Optimized reproducible sample preparation techniques enabled micro- and nanoscale multi-parameter analysis. Comparative analysis using atomic force microscopy and scanning electron microscopy demonstrated the utility of atomic force microscopy for examining tissue morphology, and its ability to generate data allowing differentiation of cells from different origins to be monitored. At low resolution atomic force microscopy produced topographic data complementary to scanning electron microscopy images, whilst at high resolution atomic force microscopy captured novel cell surface structural detail for both epithelial and neuronal cell types. Analysis of surface roughness provided biophysical data which enabled qualitative and quantitative differences between samples to be measured. This study provides an important optimization of sample preparation enabling more generalized atomic force microscopy utilization for cellular analysis required for advanced cell surface morphological studies.     

Near and far field contamination modeling in a large scale enclosure: Fire Dynamics Simulator comparisons with measured observations

The occurrence of a fire, no matter how small, often exposes objects to significant levels of contamination from the products of combustion. The production and dispersal of these contaminants has been an issue of relevance in the field of fire science for many years, though little work has been done to examine the contamination levels accumulated within an enclosure some time after an incident. This phenomenon is of great importance when considering the consequences associated with even low level contamination of sensitive materials, such as food, pharmaceuticals, clothing, electrical equipment, etc. Not only does such exposure present a localized hazard, but also the shipment of contaminated goods places distant recipients at risk. It is the intent of this paper to use a well-founded computational fluid dynamic (CFD) program, the Fire Dynamics Simulator (FDS), a large eddy simulation (LES) code developed by National Institute of Standards and Technology (NIST), to model smoke dispersion in order to assess the subject of air contamination and post fire surface contamination in a warehouse facility. Measured results are then compared with the results from the FDS model. Two components are examined: the production rate of contaminates and the trajectory of contaminates caused by the forced ventilation conditions. Each plays an important role in determining the extent to which the products of combustion are dispersed and the levels to which products are exposed to the contaminants throughout the enclosure. The model results indicate a good first-order approximation to the measured surface contamination levels. The proper application of the FDS model can provide a cost and time efficient means of evaluating contamination levels within a defined volume.     

The cultural shaping of depression: Somatic symptoms in China, psychological symptoms in North America?

The expectation that Chinese people present distress somatically is a central prediction of cultural psychopathology and has been the subject of considerable theoretical speculation. At the same time, empirical studies have been infrequent and have yielded mixed results. The authors examined symptom presentation in Chinese (n = 175) and Euro-Canadian (n = 107) outpatients, using spontaneous problem report, structured clinical interview, and symptom questionnaire methods. All 3 methods yielded cross-culturally equivalent somatic and psychological symptom subscales. Chinese outpatients reported more somatic symptoms on spontaneous problem report and structured clinical interview compared with Euro-Canadians, who in turn reported more psychological symptoms on all 3 methods. The relation between culture and somatic symptom presentation was mediated by a tendency toward externally oriented thinking. Difficulties with identifying emotions or describing them to others did not differ significantly across cultures, supporting a nonpathological interpretation of observed differences. Psychological symptom effects were larger and more consistent than somatic symptom effects; because other studies have confirmed the ubiquity of somatic presentations worldwide, these results suggest that Western psychologization may be more culturally specific than is Chinese somatization. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Identifying Failure Causes in Java Programs: An Application of Change Impact Analysis

During program maintenance, a programmer may make changes that enhance program functionality or fix bugs in code. Then, the programmer usually will run unit/regression tests to prevent invalidation of previously tested functionality. If a test fails unexpectedly, the programmer needs to explore the edit to find the failure-inducing changes for that test. Crisp uses results from Chianti, a tool that performs semantic change impact analysis, to allow the programmer to examine those parts of the edit that affect the failing test. Crisp then builds a compilable intermediate version of the program by adding a programmer-selected partial edit to the original code, augmenting the selection as necessary to ensure compilation. The programmer can reexecute the test on the intermediate version in order to locate the exact reasons for the failure by concentrating on the specific changes that were applied. In nine initial case studies on pairs of versions from two real Java programs, Daikon and Eclipse jdt compiler, we were able to use Crisp to identify the failure-inducing changes for all but 1 of 68 failing tests. On average, 33 changes were found to affect each failing test (of the 67), but only 1-4 of these changes were found to be actually failure-inducing     

Sustained electroless deposition of metallic silver from a choline chloride-based ionic liquid

This work demonstrates that a sustained galvanic coating of silver can be deposited onto copper substrates from a solution of Ag⁺ ions in an ionic liquid (IL) based on a choline chloride (ChCl) eutectic. The sustained growth of the silver deposit was facilitated by the porous nature of the film and is proven using acoustic impedance spectroscopy on a quartz crystal microbalance (QCM). The silver and copper surfaces were characterised using atomic force microscopy (AFM) and scanning electron microscopy (SEM/EDX). In the commercial process of dip coating silver from ions in aqueous media, deposition does not continue once surface coverage has been achieved, without the use of catalysts. The process reported here using ionic liquids produces silver deposits of several microns by dip coating without the use of catalysts or strong inorganic acids.