Preparation and biological evaluation of hydroxyapatite-coated nickel-free high-nitrogen stainless steel

Calcium phosphate was formed on nickel-free high-nitrogen stainless steel (HNS) by chemical solution deposition. The calcium phosphate deposition was enhanced by glutamic acid covalently immobilized on the surface of HNS with trisuccinimidyl citrate as a linker. X-ray diffraction patterns and Fourier transform infrared spectra showed that the material deposited on glutamic acid-immobilized HNS within 24 h was low-crystallinity calcium-deficient carbonate-containing hydroxyapatite (HAp). The biological activity of the resulting HAp-coated HNS was investigated by using a human osteoblast-like MG-63 cell culture. The HAp-coated HNS stimulated the alkaline-phosphate activity of the MG-63 culture after 7 days. Therefore, HAp-coated HNS is suitable for orthopedic devices and soft tissue adhesion materials.     

High-efficiency Cu(In,Ga)Se2 thin-film solar cells with a novel In(OH)3:Zn buffer layer

We propose the inclusion of a novel In(OH)₃:Zn²⁺ buffer layer for fabricating high-efficiency CIGS solar cells. This buffer layer was deposited using a solution consisting of ZnCl₂, InCl₃·4H₂O, and thiourea. The In(OH)₃:Zn²⁺ films showed high resistivities of 2.1×10⁸ Ω cm and transmittance of above 95% in the visible range. We expected two effects due to this new buffer layer: first is the formation of a passivation layer on the CIGS surface and the second is Zn-doping into CIGS layer, resulting in the formation of a buried junction. A cell efficiency of 14.0% (V_oc: 0.575 V, J_sc: 32.1 mA/cm², FF: 0.758) was achieved by using an In(OH)₃:Zn²⁺ buffer layer, without the light soaking effect.     

Determination of optimal sending voltage profile in distribution systems with distributed generators

Sending voltage profile of distribution feeder is controlled by changing a tap of distribution transformer. In a distribution network with distributed generators, for reasons of effect of reversed flows from them and existence of a great number of sending voltage profile candidates, it is not easy to control sending voltage profile within the acceptable voltage limit. In this paper, in order to determine the optical sending voltage profile of distribution transformer in a distribution network with distributed generators, the authors propose a new method to determine the optimal sending voltage profile so as to minimize the total number of tap position's change per day under constraints of acceptable voltage limit. In the proposed method, after calculating acceptable range of three‐phase voltage of distribution feeder, the optimal profile of tap position within the calculated acceptable voltage range is determined among these candidates by using reduced ordered binary decision diagram (ROBDD) which is an efficient enumeration algorithm. In order to check the validity of the proposed method, numerical simulations are carried out for a distribution network model with a distributed generator. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 161(2): 16–24, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20393     

Palladium‐Catalyzed Hydroxymethylation of Aryl‐ and Heteroarylboronic Acids using Aqueous Formaldehyde

Cyclometallated NHC palladium complexes prepared from palladium(II) acetate [Pd(OAc)₂] and unsymmetrical 1,3‐diarylimidazolinium salts catalyzed the hydroxymethylation of (hetero)arylboronic acids using an excess amount of formalin to afford (hetero)arylmethanols in good to satisfactory yields.

     

Characterization of electrode/electrolyte interface for lithium batteries using in situ synchrotron X-ray reflectometry—A new experimental technique for LiCoO2 model electrode

A new experimental technique was developed for detecting structure changes at electrode/electrolyte interface of lithium cell using X-ray reflectometry and two-dimensional model electrodes with a restricted lattice-plane. The electrodes were constructed with an epitaxial film of LiCoO₂ synthesized by pulsed laser deposition method. The orientation of the epitaxial film depends on the substrate plane; the 2D layer of LiCoO₂ is parallel to the SrTiO₃ (1 1 1) substrate (_(0 0 3)LiCoO₂//_(1 1 1)SrTiO₃)$({(003)}_{\text{LiCo}{\text{O}}_2}//{(111)}_{\text{SrTi}{\text{O}}_3})$, while the 2D layer is perpendicular to the SrTiO₃ (1 1 0) substrate (_(1 1 0)LiCoO₂//_(1 1 0)SrTiO₃)$({(110)}_{\text{LiCo}{\text{O}}_2}//{(110)}_{\text{SrTi}{\text{O}}_3})$. The anisotropic properties were confirmed by electrochemical measurements. Ex situ X-ray reflectivity measurements indicated that the impurity layer existed on the as-grown LiCoO₂ was dissolved and a new SEI layer with lower density was formed after soaking into the electrolyte. In situ X-ray reflectivity measurements indicated that the surface roughness of the intercalation (1 1 0) plane increased with applying voltages, while no significant changes in surface morphology were observed for the intercalation non-active (0 0 3) plane during the pristine stage of the charge–discharge process.     

Simulation of rubber isostatic pressing and shape optimization of rubber mold

An elastic–plastic FEM is developed to study the fundamental features of rubber isostatic pressing of powder with a view to performing a net-shape process. Experiments are also performed. It is thus shown that the properties of the rubber, in particular Poisson's ratio, give a great influence on the shape of compact and density distribution. The thickness of the rubber mold is also influential; the thicker the mold, the closer is the shape of compact to the cavity shape. An optimization scheme is also developed, so that one is able to determine the cavity shape that gives a desired shape of compact.     

Detection of CpG Methylation in G-Quadruplex Forming Sequences Using G-Quadruplex Ligands

Genomic DNA methylation is involved in many diseases and is expected to be a specific biomarker for even the pre-symptomatic diagnosis of many diseases. Thus, a rapid and inexpensive detection method is required for disease diagnosis. We have previously reported that cytosine methylation in G-quadruplex (G4)-forming oligonucleotides develops different G4 topologies. In this study, we developed a method for detecting CpG methylation in G4-forming oligonucleotides based on the structural differences between methylated and unmethylated G4 DNAs. The differences in G4 topologies due to CpG methylation can be discriminated by G4 ligands. We performed a binding assay between methylated or unmethylated G4 DNAs and G4 ligands. The binding abilities of fluorescent G4 ligands to BCL-2, HRAS1, HRAS2, VEGF G4-forming sequences were examined by fluorescence-based microtiter plate assay. The differences in fluorescence intensities between methylated and unmethylated G4 DNAs were statistically significant. In addition to fluorescence detection, the binding of G4 ligand to DNA was detected by chemiluminescence. A significant difference was also detected in chemiluminescence intensity between methylated and unmethylated DNA. This is the first study on the detection of CpG methylation in G4 structures, focusing on structural changes using G4 ligands.     

Distinction of Leu and Ile Using a Ruthenium(II) complex by MALDI-LIFT-TOF/TOF-MS analysis

The novel N-terminal labeling method using a ruthenium(II) complex derivative characteristically indicated a(n) and d(n) (N-terminal) fragment ions in high sensitivity by MS/MS analysis (MALDI-LIFT or ESI-CID). Although these fragment ions depended on a fragmentation process by MS/MS analytical methods to some degree, each case indicated similar side-chain cleavage patterns. The labeling method allows accurate distinction of amino acid residues by MS/MS analysis even if the residues are structural isomers such as leucine and isoleucine. The method was applied to long-chain peptides and provided easy and rapid N-terminal sequencing.     

Fundamental characteristics of a synthesized light source for optical coherence tomography

We describe the fundamental characteristics of a synthesized light source (SLS) consisting of two low-coherence light sources to enhance the spatial resolution for optical coherence tomography (OCT). The axial resolution of OCT is given by half the coherence length of the light source. We fabricated a SLS with a coherence length of 2.3 microm and a side-lobe intensity of 45% with an intensity ratio of LED1:LED2 = 1:0.5 by combining two light sources, LED1, with a central wavelength of 691 nm and a spectral bandwidth of 99 nm, and LED2, with a central wavelength of 882 nm and a spectral bandwidth of 76 nm. The coherence length of 2.3 microm was 56% of the shorter coherence length in the two LEDs, which indicates that the axial resolution is 1.2 microm. The lateral resolution was measured at less than 4.4 microm by use of the phase-shift method and with a test pattern as a sample. The measured rough surfaces of a coin are illustrated and discussed.