采用无偏振片反射式LCD及超低功耗驱动技术制造移动显示器件

我们通过对材料和制备条件的精细化处理,生产出一种在低刷新频率下无闪烁和图像迟滞现象的反射式显示器。该显示器的功耗非常低,且可在宽温度范围内工作,是未来移动显示器件的潜力平台。     

Estimation of daily intake of phenols in hospital meal samples

Daily intakes of 12 phenols which are possible endocrine disruptors were estimated in hospital meals from 2000 to 2001. 4-Nonylphenol (4-NP (mix)) and bisphenol A (BPA) were detected at levels of 5.0 to 19.4 ng/g and 0.2 to 1.1 ng/g, respectively. 4-tert-Butylphenol, 4-n-pentylphenol, 4 -tert-pentylphenol, 4-n-hexylphenol, 4-n-heptylphenol and 4-tert-octylphenol were detected at levels of 0.1 to 2.4 microg/g. The daily intakes of 4-NP (mix) and BPA were 5.8 microg/day and 0.42 microg/day, respectively. The daily intakes of other phenols were less than 1 microg/day.     

Pressure-sensitive molecular film for investigation of micro gas flows

For the development of micro- and nano-technology, it has been strongly desired to understand thermo-fluid phenomena inside or around micro- and nano-devices. An optical measurement technique based on the absorption and the emission of photons by molecules is useful for experimental analyses of thermo-fluid phenomena of micro and nanoflows. The pressure-sensitive paint (PSP) technique is a potential diagnostic tool for pressure measurements of micro/nano gas flows because it works as a so-called “molecular sensor”. However, the micro-scale measurement of PSP has been limited by the aggregation of the luminescent molecules and their thick film due to the use of a polymer binder. In our previous work, we adopted the Langmuir–Blodgett (LB) technique to fabricate pressure-sensitive molecular film (PSMF) with ordered molecular assemblies, and investigated properties of PSMF. In this study, a novel approach to enhance the luminescent intensity of PSMF is proposed, and the pressure distribution in a micro-nozzle is successfully measured by using PSMF. Moreover, we compared the pressure distribution measured by PSMF with that numerically analyzed by the direct simulation monte carlo (DSMC) method, showing good agreement with each other.     

Solid and thermal properties of ABA‐type triblock copolymers designed using difunctional fluorine‐containing polyimide macroinitiators with methyl methacrylate

BACKGROUND: ABA‐type poly(methyl methacrylate) (PMMA) and fluorine‐containing polyimide triblock copolymers are potentially beneficial for electric materials. In the work reported here, triblock copolymers with various block lengths were prepared from fluorine‐containing difunctional polyimide macroinitiators and methyl methacrylate monomer through atom‐transfer radical polymerization. The effects of structure on their solid and thermal properties were studied. RESULTS: The weight ratios of the triblock copolymers derived using thermogravimetric analysis were shown to be almost identical to the ratios determined using ¹H NMR. The solid properties (film density and maximum d‐spacing value) and thermal properties (glass transition and thermal expansion) were shown to be strongly dependent on the weight ratios of both PMMA and polyimide components. Furthermore, a porous film, which showed a lower dielectric constant of 2.48 at 1 MHz, could be prepared by heating a triblock copolymer film to induce the thermal degradation of the PMMA component. CONCLUSION: The use of the polyimide macroinitiator was useful in the preparation of ABA‐type triblock copolymers to control each block length that influences the solid and thermal properties. Additionally, the triblock copolymers have great potential in preparing porous polyimides in the application of electric materials as interlayer insulation membranes of large‐scale integration. Copyright © 2009 Society of Chemical Industry     

A system for synchronizing the nods of a CG character and a human using thermal image processing and a moving-average model

The purpose of this study was to develop a system for communication between a human and a computer generated (CG) character to make him or her more peaceful and cheerful. Nonverbal communication using such things as facial expression, a nod, or a hand gesture is very important for reciprocal communication between humans. In this study, an image registered by infrared rays which describes the thermal distribution of the face and neck has been used to develop a system for communication between a human and a CG character. The CG character can synchronize its nod with a person’s nod by predicting his or her nod angle. The measured feature parameter is input to a fuzzy algorithm system to obtain the nod angle of a person in front of an infrared camera, and then a moving-average model is used to predict the nod angle of the person. The average error of the nod angle obtained by the system has been estimated as about 5°. The CG character nods its head, not only when the human nods his or her head, but also when the human shakes his or her head to the left or right.     

Visible Light Irradiation of [60]Fullerene Causes Killing and Initiation of Transformation in Balb/3T3 Cells

Cell transformation in vitro is a model of carcinogenesis in vivo. Two-stage transformation assay increases the sensitivity of cells to chemicals and permits detection of carcinogens acting as initiating agents. [60]Fullerene (C₆₀) was cytotoxic in BALB/3T3 cells when it was irradiated by visible light, but not without light irradiation. Under conditions when C₆₀ was cytotoxic, it acted as an initiating agent for cell transformation, but it did not act as a complete transforming agent. the initiating activity of visible-light-irradiated C₆₀ was statistically significant in a modified two-stage transformation assay including a procedure for replating cells treated by C₆₀ and light, but it was equivocal in the standard two-stage transformation assay.     

Improvement of the position resolution of the CCD for X-ray use

The authors report here experimental results relating X-ray interaction location and event splitting. The X-ray interaction location can be localized at subpixel scale using the mesh technique. The authors found that the center of gravity of the split event is well-correlated with the X-ray interaction location. They analyzed the data using two models for the charge cloud shape: one is the rectangular model and the other is the Gaussian model. Although the authors could not distinguish between these models, they measured a root mean square charge cloud size of 1 to 2 μm for X-rays of Y-L (1.9 keV), Ag-L (3.0 keV), and Ti-K (4.5 keV). When the X-rays enter near the pixel boundary, the charge splits into adjacent pixels, allowing determination of the X-ray interaction location with an accuracy of 1.5 to 2.2 μm. The authors, therefore, expect that the X-ray CCD can function as an X-ray imager with subpixel resolution, which will be especially useful in applications involving very high spatial resolution optics     

Analysis of human error in nursing care

Analysis of reports about incidental and accidental events in nursing care were made using a reliability engineering method. Unnatural working hours, such as evening duty, night duty falling next to a holiday, two consecutive night-duty shifts, and two consecutive evening-duty shifts were major factors in the occurrence of errors. In a mixed-division ward (a ward containing patients belonging to different divisions), rule-based errors happened more frequently than in a single-division ward. Also, less experienced nursing staffs made errors more frequently than experienced nursing staffs.     

Plasma levels of pentosidine in diabetic patients: an advanced glycation end product

Nonenzymatic reactions between glucose and proteins yield advanced glycation end products (AGE) such as pentosidine. AGE accumulate in diabetic patients, alter the structure and function of tissue proteins, stimulate cellular response, and have thus been implicated in diabetic tissue damage. The present study was undertaken to assess the factors determining plasma total pentosidine level in diabetic patients and the possible relation between plasma pentosidine level and diabetic complications. In diabetic patients, including patients with renal failure, plasma pentosidine levels, assessed by HPLC assay, were correlated with serum creatinine (P < 0.0001). In patients with normal renal function, pentosidine levels were correlated with blood glucose control (hemoglobin Alc: P = 0.0028; fructoselysine: P = 0.0133), serum creatinine (P = 0.029), patient age (P = 0.0416), duration of diabetes (P = 0.0431), and total cholesterol (P = 0.0056) and LDL-cholesterol (P = 0.0208). Multiple regression analysis revealed an independent influence of hemoglobin Alc and serum creatinine on pentosidine levels (r2 = 0.216, P = 0.0026). Pentosidine levels were higher in patients with than in those without hypertension (P = 0.043) or ischemic heart diseases (P = 0.0061). No such differences were observed between patients with and without albuminuria or retinopathy. Multiple regression analysis revealed an independent influence of plasma pentosidine on the presence of hypertension (r2 = 0.129, P = 0.0382) and of plasma pentosidine and HDL-cholesterol on the presence of ischemic heart disease (r2 = 0.326, P = 0.0012). The present study demonstrated that plasma pentosidine level was significantly influenced by the quality of glycemic control and renal function. Pentosidine level was also correlated with hypertension and ischemic heart disease, and might be taken as a biomarker of diabetic cardiovascular risk.