Purity-enhanced bulk synthesis of thin single-wall carbon nanotubes using iron-copper catalysts

We report high purity and high yield synthesis of single-wall carbon nanotubes (SWCNTs) of narrow diameter from iron-copper bimetal catalysts. The SWCNTs with diameter of 0.8-1.2 nm are synthesized using the zeolite-supported alcohol chemical vapour deposition method. Single metal and bimetal catalysts are systematically investigated to achieve both the enhancement of SWCNT yield and the suppression of the undesired formation of graphitic impurities. The relative yield and purity of SWCNTs are quantified using optical absorption spectroscopy with an ultracentrifuge-based purification technique. For the single metal catalyst, iron shows the highest catalytic activity compared with the other metals such as cobalt, nickel, molybdenum, copper, and platinum. It has been found that the addition of copper to iron results in the suppression of carbonaceous impurity formation without decreasing the SWCNT yield. The purity-enhanced SWCNT shows fairly low sheet resistance due to the improvement of inter-nanotube contacts. This scalable design of SWCNT synthesis with enhanced purity is therefore a promising tool for shaping future high performance devices.     

Exceptional plasticity of silicon nanobridges

The plasticity of covalently bonded materials is a subject at the forefront of materials science, bearing on a wide range of technological and fundamental aspects. However, covalent materials fracture in a brittle manner when the deformation exceeds just a few per cent. It is predicted that a macroscopically brittle material like silicon can show nanoscale plasticity. Here we report the exceptional plasticity observed in silicon nanocontacts ('nanobridges') at room temperature using a special experimental setup combining a transmission electron microscope and a microelectromechanical system. When accounting for surface diffusion, we succeeded in elongating the nanocontact into a wire-like structure, with a fivefold increase in volume, up to more than twenty times the original length. Such a large plasticity was caused by the stress-assisted diffusion and the sliding of the intergranular, amorphous-like material among the nanocrystals.     

Effect of the Chevron Angle on Cooling Heat Transfer Characteristics of Supercritical Pressure Fluids in Plate Heat Exchangers

ABSTRACT

For the development of industrial heat pump systems supplying a high-temperature heat source over 130°C, the authors have studied on cooling heat transfer of supercritical pressure fluids flowing in chevron-type plate heat exchangers (PHEs). In this study, to examine the effect of chevron angle on cooling heat transfer of supercritical pressure refrigerants, experiments were conducted for HFC134a and HFO1234ze(E) flowing in the PHEs with the chevron angles from 30° to 65°. In the experiments, cooling heat transfer coefficients were obtained in the wide range of bulk fluid enthalpy from vapor-like high temperature to liquid-like low temperature, changing the pressure in the reduced pressure range from 1.01 to 1.2 at the mass flow rates of 7 and 11 kg/min. Especially for the enthalpy region of the pseudo critical point and its vicinity in which good heat transfer appeared, the effect of chevron angle on heat transfer of supercritical pressure fluids was clarified based on the measurements. Furthermore, the effect of chevron angle was examined for the wide angle range from 0° to 90° with estimating the heat transfer coefficient for the angles 0° and 90° from appropriate correlations. Besides, the present data were compared with some conventional heat transfer correlations.     

Styryl silsesquioxane photoresist

There is a substantial need for photopattern‐able, heat resistant, and transparent materials that are applicable to electronic devices, such as imaging or display elements. Styryl silsesquioxane based photoresist forms thin micro patterns after i‐line exposure and alkaline development, and the resulting transparent film shows remarkable heat resistance. Radicals generated from a photoinitiator induce polymerization of styryl functionality in the photoresist film to form the micropatterns. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41459.     

Mechanical and thermal properties of potassium salts of poly(ethylene‐co‐ethylacrylate): Polyolefin ionomers in the absence of acid groups

The thermal and mechanical properties of ionomers prepared by partial saponification of poly(ethylene‐co‐ethylacrylate) (EEA) with potassium were investigated by using differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The Vicat softening temperature (VST) and bending modulus were also evaluated. Molecular design of the present EEA‐based ionomers eliminates acid groups, which affect ionic aggregates for conventional ionomers. The DSC results showed that the melting enthalpy and main crystallization temperature decreased as the ion content increased, whereas on the other hand, the crystal melting temperature at about 360 K did not depend on the ion content, and a secondary exothermal peak was observed in the cooling process. The variance of the VST increased as the crystallinity decreased. The temperature‐dependent curves of DMA data of the EEA‐based potassium ionomers with a higher ion content showed elastic plateau even at temperatures above their crystal melting points. Our results indicate the existence of strong cross‐linking mediated by ion aggregates. The quadratic increase of stiffness as a function of ion content, increasing VST with decreasing crystallinity, and elastic plateau of temperature‐dependent moduli above crystal melting temperature are significant characteristics of the EEA‐based potassium ionomers, which contain ionic aggregations without acid group presence. POLYM. ENG. SCI., 55:1843–1848, 2015. © 2014 Society of Plastics Engineers     

Dip Coating of Water-Resistant PEDOT:PSS Films Based on Physical Crosslinking

Water-resistant poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films are valuable in biomedical applications; however, they typically require crosslinkers to stabilize the films, which can introduce undesired aggregation or phase separation reactions. Herein, a dipping-based process to prepare PEDOT:PSS films on nonplanar surfaces without crosslinker is developed. Sequential soaking of a dip-coated PEDOT:PSS film in ethanol and water imparts water resistance to the film. Microscopic and spectroscopic techniques are used to monitor the process and confirm that the ethanol soaking elutes the excess PSS from the film bulk, which stabilizes the film prior to the water-soaking process. The obtained films act as conductors and semiconductors on curved surfaces, including 3D-printed objects. A film deposited on a curved surface is successfully applied as the channel layer in a neuromorphic organic electrochemical transistor. This approach can enable integrated bioelectronic and neuromorphic applications that can be readily deployed for facile prototyping.     

Harnessing Topology and Stereochemistry of Glycidylamine-Derived Lipid Nanoparticles for in Vivo mRNA Delivery to Immune Cells in Spleen and Their Application for Cancer Vaccination

mRNA lipid nanoparticles (LNPs) have reached an inflection point and are now paving the way for a new wave of precision therapies. The design of nonhepatocyte RNA delivery systems without targeting ligands, however, remains a challenge. It is reported that the development of ligand-free glycidylamine (GA) derivatives containing LNPs (GA-LNPs) that preferentially deliver mRNA to immune cells in the spleen. Notably, it is demonstrated that the stereochemistry of GA-lipids has a significant impact on their self-assembly and in vitro and in vivo RNA delivery efficiency and tropism. This impact is dependent on the monomeric structure of GA and number of stereogenic centers. Furthermore, the nonlinear topology of GA lipid derivatives induced a sevenfold improvement in mRNA delivery efficiency. The top-performing estriol-GA05-30 LNPs elicited strong antitumor activity in a therapeutic and prophylactic cancer model and are well tolerated in mice. These results highlight the significance of the chemistry of ionizable lipids for extrahepatic RNA delivery and indicated a promising direction for the development of next-generation mRNA immunotherapies.     

Development of a person-following robotic assist walker with compliant-control arbitrated role-switching

Artificial Life and Robotics - To help ease the caregiving burden that comes with population aging, we proposed a bistable control system for walking-assist robots in which the transition between...