Measurement and calculation of neutron densities in BWR high burn-up fuels

A neutron-scanning device was developed for measuring accurate neutron densities of BWR high burn-up fuels up to 65 GWd tU⁻¹. Characteristic test of this device was done with a ²⁵²Cf source and adopted to measure axial distributions of neutron densities of BWR spent fuels with various enrichments (2.0–3.4%), which had been irradiated up to 60 GWd tU⁻¹ at Fukushima Daini Nuclear Power Station Unit 2(2F-2). We found the measured neutron densities were proportional to about fourth power of the corresponding burn-up values. The neutron densities calculated by the ORIGEN2.1 code and various cross section libraries showed good agreements with the measured ones in profile and absolute value except for BWR-UE file mainly based on ENDF/B-IV. The BS240J32 library based on JENDL3.2 was the best among the investigated libraries.     

Low Temperature Magnetization of Two Dimensional 3He on Three Layers of HD Preplated Graphite

We have measured the low temperature magnetization of submonolayer ³He on three layers of HD preplated graphite. NMR measurement has been performed by progressively adding ⁴He to the system, to prevent ³He atoms from being trapped in substrate heterogeneities and to change the areal density of ³He. The exchange constant (J) is found to have a similar density dependence to that for two layers of HD preplated one. The magnetization in the antiferromagnetic region increases gradually down to 100 K and shows no evidence corresponding to a spin gap.     

Cautionary observations on preparing and interpreting brain images using molecular biology-based staining techniques

Though molecular biology-based visualization techniques such as antibody staining, in situ hybridization, and induction of reporter gene expression have become routine procedures for analyzing the structures of the brain, precautions to prevent misinterpretation have not always been taken when preparing and interpreting images. For example, sigmoidal development of the chemical processes in staining might exaggerate the specificity of a label. Or, adjustment of exposure for bright fluorescent signals might result in overlooking weak signals. Furthermore, documentation of a staining pattern is affected easily by recognized organized features in the image while other parts interpreted as "disorganized" may be ignored or discounted. Also, a higher intensity of a label per cell can often be confused with a higher percentage of labeled cells among a population. The quality, and hence interpretability, of the three-dimensional reconstruction with confocal microscopy can be affected by the attenuation of fluorescence during the scan, the refraction between the immersion and mounting media, and the choice of the reconstruction algorithm. Additionally, visualization of neurons with the induced expression of reporter genes can suffer because of the low specificity and low ubiquity of the expression drivers. The morphology and even the number of labeled cells can differ considerably depending on the reporters and antibodies used for detection. These aspects might affect the reliability of the experiments that involves induced expression of effector genes to perturb cellular functions. Examples of these potential pitfalls are discussed here using staining of Drosophila brain.     

Molecular simulation for adsorption of chlorinated hydrocarbon in zeolites

Equilibrium and isosteric heat of adsorption for the system of chloroform and USY-type zeolite were studied. The USY-type zeolite (PQ Co., SiO₂/Al₂O₃=70) was used both as a pure crystalline powder and as granulated particles with binder. Chloroform was reagent grade. The adsorption equilibria were measured using a gravimetric method and were expressed as isotherms. A chromatographic method (i.e. pulse response of chloroform through the USY column with helium carrier) was used to get the initial slope of the isotherms. In the simulation, the GCMC method was used to calculate amounts adsorbed for various conditions. FF parameters were confidently applied. And modified structure model was effective for simulation. This paper was presented at The 5th International Symposium on Separation Technology-Korea and Japan held at Seoul between August 19 and 21, 1999.     

Mixed powder coating film using thermoplastic polyester and its alkaline resistance

To improve alkaline resistance, a newly mixed powder coating film using thermoplastic polyethylene terephthalate (PET) was investigated. Two kinds of polyvinyl butyral (PVB) and two kinds of polyamide (PA) were chosen as the secondary polymer. The melting temperatures (T _ms) of these materials were lower than that of primary PET polymer so the mixed powder coating was able to form a dual phase film through a fluidized bed coating process. Microscope and Fourier transform infrared spectroscopy (FTIR) observations revealed that the dual phase structure was indeed successfully formed and there was a secondary layer over the entire surface area of the film. This mixed powder coating film significantly enhanced the alkaline resistance to an environment filled with NaOH solution at 40°C in which a secondary material would be effective in protecting the film. With regard to both alkaline resistance and film formability, PET/PVB was superior to the PET/PA mixture.     

Optimizing the design of large-scale ground-coupled heat pump systems using groundwater and heat transport modeling

In order to predict the long-term performance of large-scale ground-coupled heat pump (GCHP) systems, it is necessary to take into consideration well-to-well interference, especially in the presence of groundwater flow. A mass and heat transport model was developed to simulate the behavior of this type of system in the Akita Plain, northern Japan. The model was used to investigate different operational schemes and to maximize the heat extraction rate from the GCHP system.     

Position control for a linear slider with twin linear drives

In this paper, position control of a linear slider with twin linear drives is considered. Recently, for high‐speed response, several linear motors have been used for linear slider systems. In such a linear slider, if the linear drives are controlled individually, their position responses may undergo vibrational disturbance by interaction with the output of the motors. To control this vibration, this paper presents a dynamic model of a linear slider system which consists of two motion systems decoupled by coordinate transformation, and proposes a feedback controller which is designed for these two decoupled systems. The effectiveness of the proposed method is confirmed by experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 147(4): 68–76, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10291     

Preparation of new redox-active polyionenes with porphyrin units in the main chain

Quaternization of trans-dipyridylporphyrin with 1,4-butaneditrifluoromethane-sulfonate affords new polyionenes containing porphyrin units in the main chain. The polymers exhibit chemical and electrochemical reversible redox activities. Weitz-type two-step redox processes similar to those of viologens account for the redox properties of the polymers. Received: 26 November 1996/Revised: 24 January 1997/Accepted: 10 February 1997