Optimisation of thermal processing — A review

The mathematical methods for optimising the effects of heat processing food products are reviewed in relation to microbial destruction, nutrient destruction, cooking value and loss of quality. Some data are presented for the kinetics of the various thermal effects. The results obtained by various workers are presented with particular reference to nutrient retention.     

Separation, identification and determination of lumichrome in swine feed and kidney.

During surveillance of hog carcasses from Manitoba for antibiotic residues by the Health of Animals Laboratory, Agriculture Canada, Saskatoon, an unknown substance was found which produced tetracycline-like results with the methods used. This same substance was found in an implicated swine feed premix. Using various HPLC systems and columns, UV spectroscopy, reverse-phase TLC, and mass spectrometry, the substance was isolated from the feed premix, and identified as lumichrome, a photodegradation product of riboflavin. Traces of the same substance were found in riboflavin standard. Analysis of swine kidney, previously found to contain the unknown, showed the same substance was present at a level of about 1 ppm.     

Oxygen glow discharge experiment to remove deposited layers and to release trapped hydrogen isotopes in HT-7 superconducting tokamak

An experiment to remove re-deposited layers and to release hydrogen using a glow discharge in oxygen (O-GDC) has been performed in the HT-7 superconducting tokamak. In the absence of magnetic fields, the O-GDC wall conditioning had produced rapid, controlled co-deposit removal. Average removal rates, 5.2 × 10²² H-atoms/h, 5.65 × 10²¹ D-atoms/h and 5.53 × 10²² C-atoms/h, respectively, were obtained during 145 min O-GDC experiment in the pressure range 0.5-1.5 Pa. The corresponding removal rate of co-deposited films was ∼1.19 μm/day (26.5 g/day for carbon) based on an area of 12 m². Compared to thermo-oxidation and O-ICR experiment, high pressure O-GDC wall conditioning promoted the oxidation and improved the C and D atoms removal. In the O-GDC experiment, the removal rates of H-atoms and D-atoms as H₂O, HDO and D₂O were higher than that of H₂ and D₂ by factors of about 20 and 50, respectively. During the 145 min O-GDC experiment, about 14.5% O-atoms were converted into carbon oxides and hydroxides, and about 5.37 × 10²² O-atoms were adsorbed on the walls corresponding to a coverage of 4.5 × 10²¹ O/m² on an wall area of 12 m². In a 100 min helium glow discharge (He-GDC) following the O-GDC experiment, 1.53 × 10²² O-atoms, about 28.5% oxygen retained on the walls, were removed. The removal rate of H-atoms in He-GDC cleaning after O-GDC experiment was lower than that in He-GDC cleaning before O-GDC experiment, which indicates that the O-GDC wall conditioning had effectively reduced hydrogen retention on the walls.     

Formation of steady state size distribution of precipitates in alloys under cascade-producing irradiation

The effect of coherency loss on the development of precipitate size distribution under cascade-producing irradiation is considered. The nucleation of coherent precipitates, their growth followed by coherency loss and cascade-induced dissolution of large incoherent precipitates can occur simultaneously resulting in formation of a quasi-stationary size distribution of semicoherent precipitates. To describe this process we consider co-evolution of a mixed population of coherent, semicoherent and incoherent precipitates. Mathematically, the problem is formulated as a set of discrete rate equations of nucleation kinetics (the Master equation approach) which is also used for later stages of evolution. To solve the corresponding large set of equations (typically, more than 10⁵ equations) an efficient numerical method is developed. The simulation results obtained for material parameters and irradiation conditions typical for nuclear reactors show that the coherency loss affects considerably evolution of the precipitate population. Under certain irradiation conditions, both in solution-annealed alloys and in aged ones, the mean precipitate size and the number density during prolonged irradiation tend to steady state values, whereas the size distribution function of large precipitates narrows. The width of the quasi-stationary size distribution is controlled by cascade parameters. It was found that the asymptotic quasi-stationary state of the precipitate population may depend on initial state of the alloy.     

Starting and operating regimes of vacuum plasmatrons with hollow cathodes

Optimization of starting regimes of industrial plasmatrons is considered. Dependences of the surface temperature in the bath with liquid metal on the inputted specific power are obtained. These dependences may be used for determining the optimal melting conditions and calculating the kinetic regimes for refining metals.     

Textural states of a hot-worked MA2-1 magnesium alloy

Quantitative texture analysis is used to study texture formation in an MA2-1 magnesium alloy subjected to axisymmetric upsetting at temperatures of 250–450°C and strain rates of 10^?4–10^{0 ?1}. The deformed structure is examined by optical microscopy, and the results obtained are used to plot the structural-state diagram of the alloy after 50% upsetting. The experimental textures are compared with the textures calculated in terms of a thermoactivation model.     

Elastic-stress relaxation in heteroepitaxial structures investigated by computer simulation

Atomic mechanisms of elastic-stress relaxation in heteroepitaxial structures are investigated by computer simulation. A 2D model of a heteroepitaxial structure with an empirical interatomic potential is considered. Advanced methods of saddle-point search in a multidimensional space are used to identify main mechanisms of structural change involving the formation of a structural imperfection, and to estimate energy characteristics of the processes.     

Residual Stress Simulation of Injection Molding

In this study, distribution and history of residual stresses in plaque-like geometries are simulated based on linear thermoviscoelastic model, which helps to understand the mechanics and evolution of the residual stresses in the injection molding process. The numerical calculation of direction, combined with the specified boundary conditions. Results show that the stress variation across the thickness exhibits a high surface tensile value changing to a compressive peak value close to the surface, with the core region experiencing a parabolic tensile peak. Residual stress distribution throughout the thickness is almost same along the flowpath and the final residual stresses value near the gate is lower than the value near the end of flowpath.