High speed BiCMOS current mode differential track-and-hold circuit

A new principle for a high speed BiCMOS differential track-and-hold circuit based on current mode processing is presented, and simulation results are given. The main characteristics are an acquisition time of 5.5 ns for 8 bit precision and a small-signal bandwidth of 1 GHz     

STUDY ON RESIDUES OF ~（14）C－FENITROTHION IN MODEL RICE－FISH ECOSYSTEM AND FIELD RICE－FISH ECOSYSTEM

ＳＴＵＤＹＯＮＲＥＳＩＤＵＥＳＯＦ~（１４）Ｃ－ＦＥＮＩＴＲＯＴＨＩＯＮＩＮＭＯＤＥＬＲＩＣＥ－ＦＩＳＨＥＣＯＳＹＳＴＥＭＡＮＤＦＩＥＬＤＲＩＣＥ－ＦＩＳＨＥＣＯＳＹＳＴＥＭＺｈａｎｇＺｈｏｎｇｌｉａｎｇ（张仲良）；ＷａｎｇＨｕａｘｉｎ（王化新）；Ｇ?..     

Perspective channel-type reactor with enhanced safety

Following the search for new design solutions to develop within the framework of channel trends the reactor with enhanced safety the Research and Development Institute of Power Engineering has developed the design of the multiloop boiling water reactor (MKER). The MKER enhanced safety is attained when involving the inherent safety features, passive safety systems as well as the accident consequences confinement devices. The design realizes several advantages which are typical of the channel-type reactors, namely: the design desintegration simplifying the manufacture, control, equipment delivery and decreasing, versus the pressure vessel reactors, the accident effect if it proceeds in an explosive manner; small operating reactivity margin and fuel burnup increased due to continuous refuelling; fuel cycle flexibility allowing comparatively easily to adopt the reactor to the conjuncture of the country fuel balance; multiloop circuit of the main coolant which reduces the degree and effect of the accidents connected with the equipment and pipings rupture; monitoring of the channels and fuel assemblies leak-tightness.     

Fluorescence flow cytometry of human leukocytes in the detection of LDL receptor defects in the differential diagnosis of hypercholesterolemia

A flow-cytometric method with fluorescence-labeled monoclonal antibodies (MABs) against the low density lipoprotein (LDL) receptor (C7A MAB) or 3,3'-dioctadecylindocarbocyanin-iodide (DiI) LDL has been developed that allows the quantification of LDL receptors on leukocytes and the identification of patients with familial hypercholesterolemia (FH) within 48 hours. Leukocytes were isolated from 10 mL anticoagulated blood by density gradient centrifugation. To induce maximal expression of LDL receptors, mononuclear cells were preincubated with either phytohemagglutinine (PHA) or lipoprotein-deficient serum (LPDS). LPDS-treated monocytes provided a more homogeneous cell population with regard to LDL receptor activity than did the PHA-treated lymphocytes; they also provided a greater discrimination between the fluorescence of the receptor probes and cellular autofluorescence. The C7A MAB was able to compete for DiI LDL binding by about 40%. In competition with unlabeled LDL, DiI LDL revealed linear binding, indicating an affinity similar to native LDL. The binding characteristics of DiI LDL were also similar to 125I-LDL binding. LDL isolated from familial defective apolipoprotein B-100 was not able to compete for DiI LDL binding on monocytes, whereas native LDL reduced it by about 80%. In monocytes from FH heterozygous patients, the cellular mean fluorescence using either C7A MAB or DiI LDL at 4 degrees C was 30% to 70%; in FH homozygotes, cellular mean fluorescence was less than 20% of that in monocytes from normal individuals. In patients with familial defective apolipoprotein B-100 antibody binding was normal, but one patient's own LDL failed to compete with normal DiI LDL for 4 degrees C binding on U937 test monocytes. Patient monocytes having internalization defects showed normal 4 degrees C DiI LDL binding, but at 20 degrees C cell-associated fluorescence was reduced by about 40%. In our study 384 hypercholesterolemic patients (preselected according to serum cholesterol levels, clinical symptoms, and family history) were analyzed for LDL receptor expression using the C7A MAB-based assay. In 71.8% of the patients with cholesterol levels higher than 300 mg/dL, an LDL receptor deficiency was observed. Apolipoprotein E isoforms and lipoprotein[a] were found to be independent from the LDL receptor status. In some patients with high cholesterol levels but normal LDL receptor expression with the C7A MAB assay, LDL receptor defects could be diagnosed when either reduced binding or internalization of DiI LDL or familial defective apolipoprotein B-100 was detected.(ABSTRACT TRUNCATED AT 400 WORDS)     

Synthesis and characterization of tungsten disulphide films grown by pulsed-laser deposition

The synthesis and characterization of tungsten disulphide (WS₂) films grown on 440C stainless steel substrates using the 248 nm line from a KrF excimer laser are reported. Film properties could be adjusted by controlling substrate temperature and by laser or thermal anneals. X-ray photoelectron spectroscopy, glancing angle XRD, Raman spectroscopy and high-resolution scanning electron microscopy were used to evaluate film chemistry, crystallinity and morphology. Films grown at room temperature were amorphous, near stoichiometric, and had a multiplicity of chemical states. Local order and bonding were improved most dramatically through post-deposition laser anneals. Crystallite size could be increased by raising the substrate temperature during deposition and, to a lesser degree, by post-deposition thermal anneals. Local disorder was observed within the larger crystallites compared to those that were laser annealed. Crystallinity was induced in amorphous films by mechanical rubbing at room temperature under conditions where frictional heating was negligible. The degree of control over film properties provided by PLD demonstrates its value for growing/designing tribological coatings.     

A review of error estimation and adaptivity in the boundary element method

When using the boundary element method, the accuracy of the numerical solution depends critically on the discretization of the boundary into elements (panels). The distribution of the panels is one of the most important decisions taken when analyzing a problem, but still the vast majority of users employ empirical guidelines to distribute the panels. This paper reviews the various adaptive schemes that have been proposed for boundary elements. Numerical results are obtained for infinite fluid flow problems and free surface problems and are used to assess the reliability and effectiveness of each method.     

Characterization of the flow behaviour of sausage emulsions with a simple tube viscometer

A specially designed tube viscometer was used to measure apparent viscosity during flow of Bologna type sausage emulsions moving through a pipe. Emulsions varied in fat content (from 21.8 to 44.3%) and in moisture/protein ratio (from 3.7 to 5.6), and the effects of added sodium chloride, sodium diphosphate, starch and blood plasma were investigated in a 36% fat, 3.7 moisture/protein emulsion.
The shear stresses determined as a function of shear rate were fitted by a power law. Yield stress of the emulsions was negligible relative to the applied stress. However, inspection of the flow profiles indicated that considerable slip of the sausage emulsion occurred at the pipe wall. Both emulsion flow and slip contribute to overall flow behaviour, so a kind of effective viscosity is determined. Intrinsic rheological properties and wall slip will both be affected by the composition of the sausage emulsion.