Packed hyper-ellipsoid classifiers

Pattern classification is frequently performed using the k-nn algorithm or a neural network. The choice of parameters for the former is often difficult and the amount of data which has to be stored in the classifier can be high. Neural network classifiers can overcome some of these problems but learning is often unreliable and slow. An alternative which combines some of the best features of the k-nn and neural network classifier is described by the authors. The classifier is called a packed hyper-ellipsoid classifier     

苯并口恶嗪-环氧化合物-胺类催化剂体系开环聚合反应的研究

采用TLC，GPC，1H－NMR及IR等分析方法，对苯并恶嗪－环氧化合物－胺类催化剂体系的聚合反应进行了研究，表征了产物结构，并探讨了聚合反应机理，结果表明，苯并恶唪－环氧化合物体系在胺类催化剂如苄胺，咪唑的作用下，能发生开环聚合反应，生成低分子量的聚合物。     

SPAC系统中水热CO2通量光合作用的综合模型（Ⅱ）：模型验证

本文利用禹城综合试验站土壤－植物－大气连续体系综合观测场冬小麦田实测资料，对“SPAC系统中水热、CO2通量与光合作用的综合模型（Ⅰ）模型建立”一文所建立的模型土壤水分动态、蒸发蒸腾和冠层CO2通量等功能进行了验证，利用波文比观测水汽通量结果、土壤水分剖面监测结果分别与对模拟计算腾发量和土壤水分剖面的验证结果表明，模拟计算的腾发量和土壤水分剖面是比较准确的；将模拟的光合作用过程中的CO2通量与实测值对比表明，模拟值与实测值的变化趋势是一致的，但是数据上存在一定的差异，模拟光合作用过程和强度符合一般规律，总体说明，所建立的系统模型在上述功能的模拟上是可行的。     

Ternary alloying study of MoSi2

Ternary alloying of MoSi₂ with adding a series of transition elements was investigated by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy (TEM), and energy dispersive spectroscopy (EDS). Iron, Co, Ni, Cr, V, Ti, and Nb were chosen as alloying elements according to the AB₂ structure map or the atomic size factor. The studied MoSi₂ base alloys were prepared by the arc melting process from high-purity metals. The EDS analysis showed that Fe, Co, and Ni have no solid solubility in as-cast MoSi₂, while Cr, V, Ti, and Nb exhibit limited solid solubilities, which were determined to be 1.4±0.7, 1.4±0.4, 0.4±0.1, and 0.8±0.1. Micro-structural characterization indicated that Mo-Si-M_VIII (M_VIII=Fe, Co, Ni) and Mo-Si-Cr alloys have a two-phase as-cast microstructure, i.e., MoSi₂ matrix and the second-phase FeSi₂, CoSi, NiSi₂, and CrSi₂, respectively. In as-cast Mo-Si-V, Mo-Si-Ti, and Mo-Si-Nb alloys, besides MoSi₂ and C40 phases, the third phases were observed, which have been identified to be (Mo, V)₅Si₃, TiSi₂, and (Mo, Nb)₅Si₃.     

Permeation of Zidovudine and Probenecid from Oily Bases Containing Alcohols Through Rat Skin

Permeation of zidovudine (3'-azido-3'-deoxythymidine, AZT) and probenecid from oily bases containing an alcohol through rat skin was examined. Isopropyl myristate (IPM), as an oily vehicle, showed a penetration enhancing effect for AZT and probenecid. Ethanol, n-propanol, and n-butanol were used as additives in IPM and were examined for their own permeation and the enhancing effect on the permeation of AZT and probenecid. The skin permeation of AZT and probenecid from IPM was enhanced by addition of the alcohol in IPM. The degree of the enhancement was decreased with increasing lipophilicity of the alcohol used. me permeation rate of the drug from those systems was shown to be governed by penetration-enhancing effects of the oily base and alcohol, and the penetration of the alcohol itself through the skin.     

安全:爆破工程永恒的主题——2001年重大拆除爆破工程回顾

通过对2001年我国重大拆除爆破工程的回顾,认为在提高大面积毫秒非电起爆网络可靠性,控制爆破震动、扬尘、噪声等环境影响,与机械清理配合,实现快速施工等方面取得了进展与突破;对几起爆破安全事故进行了初步分析.为保证拆除爆破工程安全,在加强理论研究、开展技术创新、建立科学有序的管理制度等方面提出了建议意见.     

吸收雷达波包装材料的研究进展

论述了吸收雷达波包装材料的基本组成及其选择原则，在此基础上讨论了吸波材料的吸波原理及影响吸波性能的因素，并指出了吸波包装材料的开发现状和应用进展及其发展万向。     

实行工程预决算审计 严格控制投资成本

针对目前企业固定资产投资中存在的投资超概算问题 ,论述了实行工程预决算审计的必要性 ,结合江西铜业股份有限公司的实践阐明了如何实行工程预决算审计 ,以达到提高投资效益的目的。     

CSAa黏弹性表面活性剂压裂液的研制

用化学试荆长链烷基季铵盐CSAa制备了两种VES压裂液并研究了相关性能，其组成（CSAa／水杨酸钠／氯化钾／正丁醇，以g／dL为单位）如下：1．0／0．3／1．0／0．2；2．0／0．6／0．5／0．1。在耐温性测定中，1．0g／dL CSAa压裂液的黏度由30℃时的75．0mPa·s降至50℃时的37．5mPa·s；2．0g／dL CSAa压裂液的黏度由40℃时的225mPa·s逐渐降至55℃时的110mPa·s，再降至60℃时的65．0mPa·s.在1701／s剪切2h后，剪切温度为42℃时1．0g／dL CSAa压裂液的黏度下降26％，剪切温度为53℃时2．0g／dL CSAa压裂液黏度下降9％。陶粒沉降速度测定结果表明，40℃、42℃时的1．0g／dL CSAa压裂液（黏度分别为60和54mPa·s）和50℃、53℃时的2．0g／dLCSAa压裂液（黏度分别为180和145mPa·s）携砂性能良好，而45℃、50℃时的1．0g／dLCSAa压裂液和55℃、60℃时的2．0g／dL CSAa压裂液，携砂性能则较差或很差。认为VES压裂液的携砂性能来源于棒状胶束网络，并不全由压裂液黏度决定。还考察了VES压裂液的破胶性能。图1表2参5。     

Ta-2．5W焊接工艺试验研究

通过对Ta-2.5W难熔重金属换热管的一系列焊接工艺试验研究,掌握了钽材的特殊焊接技术工艺和要求,满足了今后制造和修复苯胺装置中硫酸蒸发器管束的需要。