Belief-Propagation-Approximated Decoding of Low-Density Parity-Check Codes

In this paper, we propose a new reduced-complexity decoding algorithm of Low-Density Parity-Check (LDPC) codes, called Belief-Propagation-Approximated (BPA) algorithm, which utilizes the idea of normalization and translates approximately the intricate nonlinear operation in the check nodes of the original BP algorithm to only one operation of looking up the table. The normalization factors can be obtained by simulation, or theoretically. Simulation results demonstrate that BPA algorithm exhibits fairly satisfactory bit error performance on the Additive White Gaussian Noise (AWGN) channel.     

MRC分集接收的MQAM在Nakagami信道上的性能分析

Nakagami信道是一种适应性较强的信道模型，MQAM(M-ary quadrature amplitude modulation)是一种频谱利用率较高的调制方式。在存在多径影响的无线通信环境中，最大比合并(maximum ratio combining)方式的分集接收是克服衰落的有效方法。本文利用适用范围更广的Nakagami信道模型，在多径衰落的情况下对最大比合并分集接收的MQAM系统误符号率性能作了分析。仿真结果对分析实际信道下具体系统的性能具有一定的参考价值。     

低温低渗透砂岩油藏窜流大孔道深部封堵技术研究

所用堵剂为高强度的淀粉接枝聚丙烯酰胺交联凝胶SAMG-1,由<6%淀粉、4.5%-5.5%丙烯酰胺、0.003%-0.006%交联剂组成,35℃成胶时间受淀粉和交联剂用量控制,为18-20小时以上,成胶前黏度-100 mPa.s。该堵剂具有长期稳定性,在储层岩心中注入深度15 cm的堵剂,在35℃候凝48小时后及老化90天后,封堵强度分别为0.61和0.59 MPa/cm,封堵率分别为98.6%和98.1%。该堵剂优先进入高渗层,注入0.5 PV并成胶后,2组双填砂管组成的模型低、高渗管渗透率保留率分别为68.4%、0.7%和69.4%、0.0%。吉林扶余油田西一区+15-8.2区块有水井6口,油井13口,含水率达91.5%,注入水最快在5天内到达油井。报道了该区块整体深部调剖封堵窜流通道的情况,详细叙述了+15-9.2井施工中通过注入压力和井底回压控制注入流量,使堵剂陆续进入原生和次生孔道的工艺作业,该井设计注入堵剂92 m3。6口水井整体调剖后,油井产液量差别减小,产油量增加,有效期已超过了9个月,共增油843 t,含水平均下降3.87%。图7表1参8。     

下一代电视:HDTV

简单介绍数字电视的概念、分类及它们之间的区别,高清电视的发展历史及其优势。     

The Solutions for Adjustment and Reconstruction of Water-Drive Surface Systems in the Old Areas of Daqing Oilfield

Introduction 　　Owing to long-time running, more facilities including stations, pipelines, vessels have become corrosive and aged ,some process has grown old, it has exert more burden for the maintenance and repair.Simultaneously, the fluid production rate, oil production rate and water injection rate has changed greatly so that the inflicts and problems from the established surface systems will become more obvious. Energy cost of production and running has increasing continuously. Capacity has been unbalance in systems and areas. 　　……     

半固态ZnAl 27合金及其二次加热组织

研究了半固态ZnAl27合金及其二次加热组织。结果表明，半固态ZnAl27合金基本无宏观偏析，其组织为细小均匀的近球形非枝晶，综合力学性能远远高于常规铸造合金；二次加热后，α相进一步球化，边缘变得光滑圆整，可以满足半固态触变成形的需要。     

IMPACCT: Methodology and Tools for Power-Aware Embedded Systems

Power-aware systems are those that must exploit a widerange of power/performance trade-offs in order to adapt to the power availabilityand application requirements. They require the integration of many novel powermanagement techniques, ranging from voltage scaling to subsystem shutdown.However, those techniques do not always compose synergistically with eachother; in fact, they can combine subtractively and often yield counterintuitive,and sometimes incorrect, results in the context of a complete system. Thiscan become a serious problem as more of these power aware systems are beingdeployed in mission critical applications.To address the problem of technique integration for power-aware embedded systems, we propose a new design tool framework called IMPACCT and the associated design methodology. The system modeling methodology includes application model for capturing timing/powerconstraints and mode dependencies at the system level. The tool performs power-awarescheduling and mode selection to ensure that all timing/power constraintsare satisfied and that all overhead is taken into account. IMPACCT then synthesizesthe implementation targeting a symmetric multiprocessor platform. Experimentalresults show that the increased dynamic range of power/performance settingsenabled a Mars rover to achieve significant acceleration while using lessenergy. More importantly, our tool correctly combines the state-of-the-arttechniques at the system level, thereby saving even experienced designersfrom many pitfalls of system-level power management.     

新型高k栅介质材料研究进展

随着半导体技术的不断发展，MOSFET（metal-oxide-semiconductor field effect transistor）的特征尺寸不断缩小，栅介质等效氧化物厚度已小至nm数量级。这时电子的直接隧穿效应将非常显著，将严重影响器件的稳定性和可靠性。因此需要寻找新型高k介质材料，能够在保持和增大栅极电容的同时，使介质层仍保持足够的物理厚度来限制隧穿效应的影响。本文综述了研究高k栅介质材料的意义；MOS栅介质的要求；主要新型高k栅介质材料的最新研究动态；展望了高k介质材料今后发展的主要趋势和需要解决的问题。     

移动IP综述

论述了移动IP的概念和发展过程，分析了国内外对移动IP研究的重点问题及其方法，对移动IP的发展方向进行了归纳和总结，并提出了有关用的问题。     

FW调剖技术及应用

应用FW调剖技术有针对性地对 119口非钻停井区注水井采取了 4种精细调剖方案 ,对比了化学浅调剖应用前后注水井层间矛盾的缓解 ,纵向上吸水剖面的改善 ,注水量和吸水指数的变化及渗流能力的变化。结果表明 ,注水井化学浅调剖后 ,井区的连通油井明显受效 ,获得较高的增油量 ,水驱的开发效果得到改善。化学浅调剖可以有效地封堵高渗透层 ,扩大低渗透层注入水的波及体积 ,减缓注水井层间矛盾 ,实现了对注水井吸水剖面的有效调整 ,这对深化注水结构调整、挖掘各类油层潜力、提高储量动用程度有显著的效果。