Finite-difference time-domain analysis and experimental examinationof the performance of a coupled-cavity MQW laser/active waveguide at1.54 μm

The performance characteristics of a coupled cavity InGaAsP-InP MQW laser/active waveguide made by one-step epitaxy and well-controlled reactive ion etching (RIE) have been theoretically analyzed and experimentally determined. A theoretical model based on a finite-difference time-domain (FDTD) technique was used to simulate the propagation of an optical wave launched in the coupled system and determine the reflectivity of the facets created by RIE. The calculated effective reflectivity of the coupling region consisting of two facets and an air gap is between 0.45 and 0.55, which is in good agreement with the experimentally measured value of 0.5. The reflectivity of a single etched mirror derived from this value is estimated to be 0.3. A 120-μm-long monolithically integrated active waveguide when biased as a modulator and excited by the laser shows a maximum extinction ratio of 8 dB and a modulation bandwidth ⩾14 GHz at a dc bias of -0.5 V with a bias swing of 2 V     

Simplified method for the measurement of segmental colonic transit time

Segmental colonic transit has been measured in 101 patients. Two MBq of 111Indium absorbed on resin pellets and encapsulated in an enteric coated capsule was given at 7 00 am. Hourly images during the first day, and three images during each subsequent day were acquired for up to three days. Using all scan and patient data the scans were categorised in one of the five patterns of colonic transit: normal, rapid, right delay, left delay, or generalised delay. The geometric centres and per cent activity at each time point was compared between the five groups of colonic transit patients to find the best time for imaging and so to distinguish the five groups. During the first day, early images did not help in diagnosis of patterns of transit, however, in the later images (six hours onwards after the ingestion of the activity) the rapid transit groups could be identified. Images at 27 and 51 hours were both required to distinguish all five groups of patients from each other. Only in the 'normal' transit patients was there some excretion of the activity during the course of the second day, otherwise there was no difference in the images taken in the course of a day (second or third day). A simplified protocol requires a minimum of three images to distinguish all five patterns of colonic transit. The activity should be ingested in the morning (7 00 am) and the first image taken at the end of the working day (8-10 hours after ingestion), the second image on the morning of the second day, and the third image during the course of the third day. This simple protocol would provide all the clinically relevant information necessary for correct classification of the colonic transit.     

Sub-quarter micron silicon integrated circuits and single wafer processing

This paper describes the role of single wafer processing in the development of sub-quarter micron silicon integrated circuits (ICs). The issues related to device processing, choice of materials, performance, reliability, and manufacturing are covered. Single wafer processing based rapid photothermal processing (dominant photons with wavelength less than about 800 nm) is an ideal answer to almost all the thermal processing requirements of current and future Si ICs. For process integration, a new model for process optimization based on minimization of thermal stress is proposed. For breaking the sub-100 nm manufacturing barriers, high throughput lithography based on direct writing is a proposed solution.     

A comparison of leaf-spring with aircushion trailer suspensions in the transport environment

Packaging engineers need to be able to accurately determine the forces present in the shipping environment in order to protect packaged goods. The purpose of this study was to determine the vertical vibration levels measured in three separate truck-trailer suspension systems; conventional leaf-spring, conventional air-ride and damaged air-ride. The main conclusion reached in this study is that the air-ride suspension when maintained gives lower power density (PD) levels on all road surfaces studied. A damaged air-ride suspension and leaf-spring suspension are very similar in response frequencies, although the damaged air-ride produces higher vibration levels at lower frequencies.     

Distributed memory systems for simulating artificial neural networks

In executing tasks involving intelligent information processing, the human brain performs better than the digital computer. The human brain derives its power from a large number [O(10¹¹)] of neurons which are interconnected by a dense interconnection network [O(10⁵) connections per neuron]. Artificial neural network (ANN) paradigms adopt the structure of the brain to try to emulate the intelligent information processing methods of the brain. ANN techniques are being employed to solve problems in areas such as pattern recognition, and robotic processing. Simulation of ANNs involves implementation of large number of neurons and a massive interconnection network. In this paper, we discuss various simulation models of ANNs and their implementation on distributed memory systems. Our investigations reveal that communication-efficient networks of distributed memory systems perform better than other topologies in implementing ANNs.     

Secondary web-flange interaction in framed-tube buildings

In the conventional plane-frame model of framed-tube buildings, only the primary interaction between the web frame and the flange frame is considered, through vertical shear transfer at corner columns. In addition to this, a secondary interaction takes place due to horizontal shear transfer at each floor level, through the floor slab having high in-plane rigidity. This interaction causes a discrepancy in member forces of a few bottom and top storeys. A simple modification is suggested in the form of an additional cantilever column connected to the conventional plane-frame model by axial force transfer members at every floor level. The improved model yields member forces in all the storeys that are very close to those obtained using 3D analysis.