废旧电池中有价金属回收利用探讨

随着中国经济的稳步发展和投资环境的不断优化,中国已成为电池的制造和消费大国,每年产生数亿只废旧电池。对废旧电池的回收利用已成为全社会关注的问题。介绍了废旧电池中有价金属的回收利用方法,着重介绍了锂离子二次电池正极材料有价金属的回收利用方法。指出,中国商品化的正极材料只有钴酸锂（LiCoO2）,这种正极材料钴含量高,且钴价值高,并且回收工艺可行,因此,从钴酸锂正极材料中回收钴等有价金属,对发展中国的循环经济具有重要意义。同时介绍了锂离子二次电池正极材料的研究现状。     

共沉淀法制备三元系铋基焦绿石型陶瓷粉体

采用改进的Mergen A．方案，用氧化锌、三氧化二铋、三氧化二锑为原料，氨水、草酸铵和碳酸铵分别为沉淀剂，盐酸为溶剂，用共沉淀法成功制备了亚微米级颗粒、高活性的铋基Bi1.5ZnSb1.5O7（BZS）焦绿石型介电陶瓷粉体。探讨了用不同的沉淀剂、在不同的烧结温度所得产物的形态。结果表明氨水做沉淀剂在570℃就可生成纯的焦绿石结构。与Mergen A方法相比成本大大降低，可以使瓷片组织的均匀性提高，电性能得到改善，电压梯度下降。     

A New Nonlinear Controller for Trajectory Tracking of the Longitudinal Dynamics of a Small Scale Helicopter

A nonlinear control scheme is proposed for the trajectory tracking problem of a small scale helicopter’s longitudinal dynamics. The control scheme is based on a control design procedure that constructs static feedback regulators for nonlinear systems which are linearizable by dynamic feedback. Besides, the flatness characteristics of the helicopter’s longitudinal dynamics are used to design the desired trajectory. The controller proposed is based on the longitudinal model of the small scale helicopter including the main rotor and stabilizer bar dynamics. Sufficient conditions are given to guarantee asymptotic convergence to zero of the tracking error and to keep the main rotor thrust always negative assuming that all the helicopter’s parameters are known and that all helicopter’s states are measured. Numerical simulations are given to show the performance of the controller in the presence of the main rotor and stabilizer bar dynamics.     

并行企业运作--基于并行工程的过程企业管理

针对过程企业,基于并行工程的思想,提出了过程企业运作管理的新思想--并行企业运作,并采用IDEFO(ICAM Defintion)功能建模方法,建立了集成并行的业务过程模型,在每个业务过程内部采用"监控-决策-执行"的实时信息反馈系统,以实现企业各业务过程之间的信息交互与资源共享.     

聚乙二醇-400催化合成橙花醚的研究

研究了利用多种相转移催化剂在不同条件下合成橙花醚。结果表明：采用聚乙二醇 ４００（ＰＥＧ ４００）为催化剂，当β 萘酚：溴乙烷：催化剂＝１：１２：００７（摩尔比）、温度为７６℃、反应７ｈ时，产率可高达９８１％。     

Proposed Phenomenological PTCR Model and Accompanying Phenomenological PTCR Chart

The positive temperature coefficient of resistivity (PTCR) behavior of semiconductive BaTiO₃ is well explained by the Heywang model, which predicts the resistivity behavior above the Curie point based on the acceptor state density at the grain boundaries, the charge carrier density, and the energy gap, E _s, between the conduction band and the acceptor levels. However, the relationship between these parameters and the production parameters (sintering time, composition, and cooling rate) is not well understood. Recently, the present authors have found that E _s can be increased by thorough oxidation. This increase is attributed to a change in the oxidation state of the acceptor. Based on this finding and results from the literature, a phenomenological PTCR model and an accompanying PTCR chart for acceptor–donor-codoped BaTiO₃ are proposed to clarify this relationship. The PTCR chart clarifies that acceptor dopant concentrations, oxidation time, and oxygen partial pressure during oxidation or cooling can be optimized simultaneously to obtain optical PTCR properties.     

八碳烯分离工艺的研究

从能量综合集成的角度提出了八碳烯精馏分离工艺 ,对所提流程进行了优化模拟计算及分析 ,为八碳烯分离工艺的施工设计提供了充分的依据。投产情况表明 ,该研究改变了八碳烯的生产现状 ,使得八碳烯生产的经济效益显著提高     

智慧·创新·分享——大师贴膜品牌升级行业发布会举办

十年发展,十年沉淀,十年新起点!2013年12月9日,由上海追得贸易发展有限公司主办的"智慧·创新·分享"暨"大师贴膜品牌升级行业发布会"于上海兴荣温德姆五星级酒店隆重召开。时值企业成立十周年,大师贴膜品牌迎来了又一次里程碑式的跨越,追得企业也将迎来更加创新的发展模式。