Application of discrete event simulation for robust system design of a melt facility

This paper presents a methodology to identify robust operating regions through the selection of controllable factory variables, using discrete event simulation. A casting plant melt facility was used as an industrial test bed to develop these techniques. A robust system design was determined by response surface analysis of key production parameters. Furthermore, robust operating policies that maximise throughput, while minimizing work-in-progress and thus energy consumption were identified.     

Estimation of Thermal Stresses in Hot-Rolled Steel Coils During Natural Air Cooling

Hot-rolled steel coils are stored upon manufacturing to cool to about 50°C. High temperatures of coiling cause thermal stresses during the cooling stage that result in spot welding between strip layers of coil. Under these conditions, surface defects or strip ruptures may occur during uncoiling. This paper will initially introduce the heat transfer model in the coil based on stress-dependent thermal conductivity in the radial direction of the coil. The two approaches of “solid body” and “thin-walled, concentric cylinders” for thermal stress analysis will then be used to compute the thermal compressive stresses in the coil. Comparison of the results obtained from these two approaches in the mathematical model reveals that the solid body approach overestimates the thermal stresses when compared to the thin-walled concentric cylinders approach, the inequality rising with reduced strip thickness. This difference, however, is found to have no considerable impact on predicting coil temperature.     

On the efficiency of bootstrap method into the analysis contingency table

The bootstrap method is a computer intensive statistical method that is widely used in performing nonparametric inference. Categorical data analysis, in particular the analysis of contingency tables, is commonly used in applied field. This work considers nonparametric bootstrap tests for the analysis of contingency tables. There are only a few research papers which exploit this field. The p-values of tests in contingency tables are discrete and should be uniformly distributed under the null hypothesis. The results of this article show that corresponding bootstrap versions work better than the standard tests. Properties of the proposed tests are illustrated and discussed using Monte Carlo simulations. This article concludes with an analytical example that examines the performance of the proposed tests and the confidence interval of the association coefficient.     

Classification of Geothermal Energy Resources in Japan Applying Exergy Concept

Higher demand for energy consumption and importance of environmental issues has encouraged researchers and policy makers to consider renewable energies more seriously. Geothermal resources are a green energy source that can make a considerable contribution in some countries. Japan has the third ranking geothermal energy potential, and its geothermal electricity production is currently eighth in the world. Since the nature of geothermal resources dictates its method of utilization, it is important to categorize available resources. There is no consensus on classification of geothermal resources. Most scientists, from geologist to engineers, agree on the term temperature. However, temperature or enthalpy alone cannot describe the nature of fluids; they can have same temperature with different phases, such as saturated water or saturated steam. Using exergy for resource classification benefits their comparison, according to their ability to do work. In this paper, exergetic classification of geothermal resources was applied to 18 under‐operating geothermal power plants in Japan. Six geothermal fields have high exergy resources according to their SExI values in excess of 0.5. The remaining geothermal fields in Japan are classified in the medium resources zone. Classification results can be used by decision makers as a reference for future geothermal development. Copyright © 2012 John Wiley & Sons, Ltd.     

Monitoring the aging of beers using a bioelectronic tongue

This paper deals with the implementation and the application of a bioelectronic tongue including three enzymatic biosensors based on tyrosinase and phthalocyanines as electron mediators, to evaluate the changes that occur during the aging of beers. For this purpose, alcoholic and non alcoholic beers, packaged in can and bottle, have been analyzed using cyclic voltammetry. The electrochemical signals showed significant changes during the aging process. The features extracted from the cyclic voltammograms have been used to perform Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA). Data have revealed a clear discrimination among the beer classes in the aging process and the results were confirmed by Probabilistic Neural Networks (PNN) with Radial Basis Functions (RBF) and FeedForward Networks with Backpropagation (BP) learning method. The bioelectronic tongue has demonstrated a good capability to discriminate and classify the beer types satisfactorily in such a way, for all beer treatments, full classification accuracy was found.     

Dielectrophoretically assembled particles: feasibility for optofluidic systems

This work presents the dielectrophoretic manipulation of sub-micron particles suspended in water and the investigation of their optical responses using a microfluidic system. The particles are made of silica and have different diameters of 600, 450, and 250 nm. Experiments show a very interesting feature of the curved microelectrodes, in which the particles are pushed toward or away from the microchannel centerline depending on their levitation heights, which is further analyzed by numerical simulations. In doing so, applying an AC signal of 12 V_p–p and 5 MHz across the microelectrodes along with a flow rate of 1 μl/min within the microchannel leads to the formation of a tunable band of particles along the centerline. Experiments show that the 250 nm particles guide the longitudinal light along the microchannel due to their small scattering. This arrangement is employed to study the feasibility of developing an optofluidic system, which can be potentially used for the formation of particles-core/liquid-cladding optical waveguides.     

Unique microstructure analysis of ethylene-propylene copolymer synthesized using catalytic system based on α-diimine nickel complexes: a comparative study by 13C NMR technique

The microstructure of rubber-like ethylene-propylene copolymer (MN4) produced by a mixed nickel-based system (MN) containing catalysts of dibromo[N,N′-bis(2,6-diisopropylphenyl)-2,3-butanediimine]nickel(II) n1 and dibromo[N,N′-(phenanthrene-9,10-diylidene)bis(2,6-diisopropylaniline)]nickel(II) n2 was determined by ¹³C NMR technique. Sequences distribution of ethylene (E), propylene (P), EP, inverted propylene and uninterrupted methylene and also methylene number-average sequence lengths for the copolymer (MN4) were estimated. The results obtained from the MN4 EP copolymer were compared with reported copolymers which had been synthesized using constrained geometry catalyst (CGC) and vanadium-based Ziegler-Natta catalyst. The results demonstrated that the MN4 EP copolymer had fewer alternating comonomer sequences than ethylene-propylene elastomers obtained by CGC and vanadium-based (V) catalysts. A large number of the inversion structures (66 %) and high mole percent of sequences containing a long branch (3.2 mol%) were also observed in unique microstructure of the copolymer (MN4).     

Prolonged drug release using PCL–TMZ nanofibers induce the apoptotic behavior of U87 glioma cells

In situ prolonged delivery of drugs at the site of tumor can be satisfactorily accelerated patient recovery. We compared the effect of temozolomide while incorporated by polycaprolactone nanofibers on the apoptotic behavior of U87 glioma cells. After biocompatibility evaluation of nanofibers by scanning electron microscope and 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide analysis, the apoptosis of U87 cells was evaluated using p53, Bcl2 and Bax genes expression. It was found that nanofiber-temozolomide group showed a greater ability to induce apoptosis as well as have a significantly diminished initial burst release of drug compared with other groups and have promising potential in treating cancer.     

A novel solvent-impregnated resin containing 3-hydroxy-2-naphthoic acid for stepwise extraction of Th(IV) and U(VI) over other coexistence ions

A new solvent-impregnated resin (SIR) was constructed using Amberlite XAD-2 and 3-hydroxy-2-naphthoic acid (3H2NA). The SIR was applied for stepwise extraction of Th(IV) and U(VI) from the coexistence ions dissolved in aqueous media at pHs of 3.0 and 7.0, respectively. The U(VI) and Th(IV) ions adsorbed on the minicolumn were consecutively eluted with 0.5 M and 4 M HCl solutions. They were then measured by Arsenazo III at their maximum absorption wavelengths. The characteristic parameters for the successful separation of these ions from the aqueous media were investigated. The SIR showed excellent reproducibility during the 800 subsequent extraction cycles.