Congenital hematometrocolpos in a circumcised girl. An anomaly superimposed by cultural mutilating practices

A rare case associated with congenital hematometrocolpos in a circumcised 13 years old Somalian girl is presented. Emphasis on proper history is highlighted. Mutilation caused by bad cultural practice of female circumcision which is although not a problem in Pakistan, is brought into notice for those who may be unaware of perineal appearance of a circumcised female and stitched over vagina.     

ROLE OF COMPOSITION ON THE VISCOSITY AND SHEAR STRESS TEMPERATURE BEHAVIOUR OF SOME LUBE OIL BASE STOCKS

Lubricating oil base stocks differ greatly in their chemical composition and consequently in their physical properties and applications. Influence of waxes and various hydrocarbon type constituents viz saturates and aromatic components on the viscosity and shear stress as a function of temperature in different lube oil base stocks has been studied in the present paper.     

Second-law-based thermodynamic analysis of two-stage and mechanical-subcooling refrigeration cycles

Thermodynamic analysis of HFC-134a vapor-compression refrigeration cycles is investigated by both the first and second laws of thermodynamics. Second-law analysis is carried out for both two-stage and mechanical-subcooling refrigeration cycles. The analysis is performed on each of the system components to determine their individual contribution to the overall system irreversible losses. It is found that most of the losses are due to a low compressor efficiency. Irreversibilities of expansion valves and condenser are also significant. In addition, it is shown that the optimum inter-stage pressure for two-stage and mechanical-subcooling refrigeration systems is very close to the saturation pressure corresponding to the arithmetic mean of the refrigerant condensation and evaporation temperatures. These results are compared with the existing practice in the industry. Furthermore, theoretical results of a two-stage refrigeration system performance are also compared with experimental values for a CFC-22 system.     

Delivering nanotechnology to the healthcare, IT and environmental sectors — A perspective from the ‘London centre for nanotechnology’

Nanotechnology research is booming worldwide, having an impact on multiple sectors and with a general belief that medical and biological applications will form the greatest area of expansion over the next decade, driven by an attempt to bring radical solutions to areas of unmet medical need. What is true in the USA is also being fulfilled in Europe, though generally at a significantly lower investment level, even for ’large’ capital infrastructure and interdisciplinary centres. Against this, the UK and its European partners are following the maxim ’small is beautiful’ and are attempting to identify and grow academic research and commercial businesses in areas that traditional nanotechnology developments out of engineering or physics find challenging. Thus, University College London and Imperial College, in a major joint project linked to other centres of excellence both in the UK and in the rest of Europe, are building upon their internationally competitive medical and hard-matter research activities to focus on and develop nanotechnology as a major sector of research activity. The two universities together form one of the largest centres of biomedical research outside the USA. A novel approach to commercialisation has been taken, exemplified by the establishment with government and private equity funds of a ‘Bionanotechnology Centre’ — this will act as a portal for UK industry to access specialist skills to solve issues relating to developing nanotechnology-based medical applications, for example, for environmental screening, diagnostics and therapy. This paper reviews our academic and business strategy with examples from our current research portfolio, biased towards medicine as the London Centre for Nanotechnology’s most rapidly growing area.     

Acidogenic fermentation of blended food‐waste in combination with primary sludge for the production of volatile fatty acids

The performance of a laboratory‐scale anaerobic acidogenic fermenter fed with a mixture of blended kitchen food‐waste and primary sludge from a sewage treatment plant was investigated for the production of volatile fatty acids (VFA). The operating variables for acidogenic fermentation were kitchen food‐waste content (10 and 25 wt %), hydraulic retention time (HRT: 1, 3 and 5 days), temperature (ambient: 18 ± 2 °C, and mesophilic: 35 ± 2 °C) and pH (varied from 5.2 to 6.7). The experimental results indicated that effluent VFA concentrations and VFA production rates were higher at ambient temperature than at mesophilic conditions. The net amount of VFA with 10 wt % food‐waste increased up to 920 mg dm^?3 with an increase of HRT, but contrasting results (a decrease of 2610 mg dm^?3) were found due to the conversion of VFA into biogas in the case of 25 wt % food‐waste, which increased significantly at HRT of 3–5 days. In terms of biogas composition (CO₂ and CH₄), the organic matter was converted into CO₂ through the oxidative pathway by facultative species at low temperature while mesophilic temperature and optimum pH (6.3–7.8) played a pivotal role in increasing rate of conversion of VFA into biogas by methanogenesis. Rates of VFA production and their conversion are dependent on the food‐waste content in the mixture. Yet, the higher concentration of food‐waste (25% compared with 10%) did not produce VFA proportionally due to the increased rate of conversion of VFA into gaseous products. The maximum VFA production rate (0.318 g VFA_produced g^?1 VS_fed day^?1) was achieved in the 10 wt % food‐waste at ambient temperature and at a 5‐day HRT. Copyright © 2005 Society of Chemical Industry     

Phosphine-induced sterility in Ephestia cautella (Lepidoptera: Pyralidae)

The present study was conducted to explore the sterilizing effect of phosphine on Ephestia cautella. Three to four-day old pupae were exposed to 0, 0.007, 0.014, 0.021, 0.028, 0.035, 0.042 and 0.049 mg/l of phosphine for 24 h at room temperature. The normally developed adults of each treatment were pair mated and several physiological and genetical parameters were investigated. The results showed gradual increases with dose in pupal mortality and adult malformation. The crossing results showed no changes in adult longevity and mating frequency. However, consistent reduction was noted in the fecundity and fertility of normally emerged adults. Preliminary data indicated similar levels of inherited sterility in the F₁ adults raised from the above mentioned crosses.     

An inverse solution methodology for estimating the diffusion coefficient of gases in Athabasca bitumen from pressure-decay data

An inverse solution methodology is developed for the estimation of diffusion coefficient of gases in highly viscous, oil-sands bitumens from isothermal, pressure-decay measurements. The approach involves modeling the rate of change in pressure using the diffusion equation for the liquid phase coupled with a mass balance equation for the gas phase. The inverse solution framework is utilized to arrive at two graphical techniques for estimating the diffusion coefficient. Both techniques involve the determination of the slope of a straight line resulting from plotting the experimental data in accordance with the developed model. An advantage of the proposed techniques is that the diffusion coefficient is estimated directly, i.e. without making it an adjustable parameter. The novelty of the proposed method is in its simplicity as well as its ability to isolate portions of the pressure-decay data affected by experimental fluctuations. The effect of the initial pressure on the predicted diffusion coefficient and pressure-decay profile was also investigated. The diffusion coefficients of CO₂, CH₄, C₂H₆ and N₂ in Athabasca bitumen at 50–90 °C and about 8 MPa were estimated and compared with literature values.     

An analytical method for the calculation of static characteristicsof linear step motors for control rod drives in nuclear reactors

An analytical method for calculating static characteristics of linear dc step motors (LSM) is described. These multiphase passive-armature motors are now being developed for control rod drives (CRD) in large nuclear reactors. The static characteristics of such LSM is defined by the variation of electromagnetic force with armature displacement and it determines motor performance in its standing and dynamic modes of operation. The proposed analytical technique for calculating this characteristic is based on the permeance analysis method applied to phase magnetic circuits of LSM. Reluctances of various parts of phase magnetic circuit is calculated analytically by assuming probable flux paths and by taking into account complex nature of magnetic field distribution in it. For given armature positions stator and armature iron saturations are taken into account by an efficient iterative algorithm which gives fast convergence. The method is validated by comparing theoretical results with experimental ones which shows satisfactory agreement for small stator currents and weak iron saturation