Effect of electron beam irradiation on the dielectric properties of fluorocarbon rubber

Terpolymeric fluorocarbon rubber (68 wt.-% fluorine, 1.4 wt.-% hydrogen) was subjected to electron beam irradiation using 1,1,1-trimethylolpropane triacrylate (TMPTA), tripropylene glycol diacrylate (TPGDA), and pentaerythritol tetracrylate as radiation sensitizers. Compared to the original sample both the dielectric constant and the dielectric loss factor decrease for samples treated to a certain dose level, beyond which there is an increase. Similar improvement in dielectric properties is observed at relatively higher levels of TMPTA, owing to the increased degree of crosslinking. Among the various polyfunctional monomers used as radiation sensitizers, both the dielectric constant and the dielectric loss factor are higher for systems based on TPGDA due to the reduced crosslink density.     

Irradiation-modification of starch-containing thermoplastic blends. I. Modification of properties and microstructure

Irradiation-modification of the blends of various starches with a synthetic polymer [poly(ethylene-co-vinyl alcohol)] was carried out using an electron beam. The effect of irradiation on neat starches was studies using gel permeation chromatography. Changes in the thermal and mechanical properties of the blends, as well as in their microstructures, were also evaluated. The data indicate, consistent with other reports in literature, that starch molecules fragment under the effect of ionizing radiation, while the EVOH is relatively unaffected. These substantial (mainly physical) modifications to the starch molecules manifest themselves in changes in the thermal behavior of the blends. Furthermore, the mechanical properties of filaments obtained from molten irradiated pellets were quite different from those of control filaments, at least for some starches. Micrographic examination of some blends indicated a correspondence between a modification in the microstructure of the filaments and a change in their mechanical properties. It seems likely that the enhanced mobility of the fragmented starch molecules in the melt is responsible for these changes in the microstructure and concomitantly, the mechanical properties of the blend. Such an irradiation-based physical modification of starch may be of use in tailoring the properties of commercial blends of starches with synthetic thermoplastics. © 1996 John Wiley & Sons, Inc.     

Optimization of gas chromatography–single quadrupole mass spectrometry conditions for multiresidue analysis of pesticides in grapes in compliance to EU-MRLs

A single quadrupole GC–MS method was optimized for multiresidue determination of 47 pesticides in grapes with limit of quantifications of each compound in compliance with the EU-MRL requirements. Sample preparation involved extraction of 10 g sample with 10 ml ethyl acetate (+10 g sodium sulphate) by homogenization at 15,000 rpm followed by centrifugation at 3000 rpm. The supernatant was cleaned by dispersive solid phase extraction with primary secondary amine and acidified with 0.1% formic acid. Residues were estimated in selected ion monitoring mode with programmable temperature vaporizer-large volume injection (8 μl). All the GC and MS parameters were thoroughly optimized to achieve satisfactory linearity (R² > 0.99) within 0.01–0.25 mg kg⁻¹ with minimum matrix interferences. Recoveries at 0.01 and 0.02 mg kg⁻¹ were within 67–120% with associated precision RSD below 19%. The method was successfully applied for analysis of the real world samples for incurred residues.     

Numerical Simulations of the High-Velocity Impact of a Single Polymer Particle During Cold-Spray Deposition

In this paper, deposition of polymer powders was studied numerically for the cold-spray deposition technique. In cold spray, a solid particle is impacted on a substrate at high velocity. The deformation and heating upon impact have been shown to be enough to result in particle deposition and adhesion even without melting the particle. Here, a systematic analysis of a single high-density polyethylene particle impacting a semi-infinite high-density polyethylene substrate was carried out for initial velocities ranging between 150 and 250 m/s using the finite element analysis software ABAQUS Explicit. A series of numerical simulations were performed to study the effect of a number of key parameters on the particle impact dynamics. These key parameters include particle impact velocity, particle temperature, particle diameter, composition of the polyethylene particle, surface composition and the thickness of a polyethylene film on a hard metal substrate. The effect of these parameter variations on the particle impact dynamics were quantified by tracking the particle temperature, deformation, plastic strain and rebound kinetic energy. The trends observed through variation of these parameters provided physical insight into the experimentally observed window of deposition where cold-sprayed particles are mostly likely to adhere to a substrate.     

Tricycloillicinone, a novel prenylated c6-c3 compound increasing choline acetyltransferase (ChAT) activity, isolated from Illicium tashiroi

Tricycloillicinone (1), a novel tricyclic prenylated C6-C3 compound, has been isolated as a neurotrophic substance from the woods of Illicium tashiroi and its structure has been elucidated by spectroscopic analyses. Compound 1 could increase ChAT activity in culture of P10 rat septal neurons.     

Development of the package-reactor (1) -reactor for pioneering new nuclear markets-

A new small reactor concept named Package-Reactor has been developed through a joint research of Mitsubishi Heavy Industries, Ltd. and Hitachi, Ltd. Several key designs have been investigated, taking into account both PWR and BWR technologies. The Package-Reactor is designed to attain high reliability, high safety, good maintainability, good operability and low construction cost. To achieve the aims, its nuclear steam supply system adopts the natural-circulation core cooling system, and the reactivity-control-free system, under normal operation. The core assembly is composed of several sub-cores. Each sub-core is housed in a pressure tube called “cassette”. The cycle length is five years, by using UO₂ fuel with 5wt% enrichment. The containment vessel is small and the nuclear steam supply system can be constructed through ground transportation.     

Development of the package-reactor (2) -core characteristics-

A new small reactor concept named the Package-Reactor has been jointly developed by Hitachi, Ltd. and Mitsubishi Heavy Industries, Ltd. The reactor technology was built from that of conventional LWRs. The reactor core consists of 12 cassettes containing fuel rods with a similar design to that of PWR fuel rods. Each cassette has about a 0.4 m outer diameter and they are fixed with about 0.5 m pitch to each other in the atmospheric pressure condition. A tube-type control cluster was developed. It can decrease the rise of reactivity for the one-rod-stuck condition. An advanced cassette design was studied in which the down-comer is placed at the center of the fuel region. This concept, which improves neutron economics and the cold shutdown margin, will increase the marketability of the Package-Reactor. An operation period of more than 8 years can be achieved with UO₂ fuel enrichment of 5.0wt%.     

Scaling up biomass gasifier use: an application-specific approach

Biomass energy accounts for about 11% of the global primary energy supply, and it is estimated that about 2 billion people worldwide depend on biomass for their energy needs. Yet, most of the use of biomass is in a primitive and inefficient manner, primarily in developing countries, leading to a host of adverse implications on human health, environment, workplace conditions, and social well being. Therefore, the utilization of biomass in a clean and efficient manner to deliver modern energy services to the world's poor remains an imperative for the development community. One possible approach to do this is through the use of biomass gasifiers. Although significant efforts have been directed towards developing and deploying biomass gasifiers in many countries, scaling up their dissemination remains an elusive goal. Based on an examination of biomass gasifier development, demonstration, and deployment efforts in India—a country with more than two decades of experiences in biomass gasifier development and dissemination, this article identifies a number of barriers that have hindered widespread deployment of biomass gasifier-based energy systems. It also suggests a possible approach for moving forward, which involves a focus on specific application areas that satisfy a set of criteria that are critical to deployment of biomass gasifiers, and then tailoring the scaling up strategy to the characteristics of the user groups for that application. Our technical, financial, economic and institutional analysis suggests an initial focus on four categories of applications—small and medium enterprises, the informal sector, biomass-processing industries, and some rural areas—may be particularly feasible and fruitful.     

Novel D-ring analogues of podophyllotoxin as potent anti-cancer agents

Insulin is one of the hormonal regulators of leptin synthesis and participates in adipose tissue maintenance. The present study was undertaken to clarify the association of endogenous insulin secretion and mode of therapy with body fat and serum leptin levels in diabetic subjects. We measured the fasting serum C-peptide level, as an estimate of endogenous insulin secretion, and the serum leptin level in 176 Japanese diabetic subjects (79 men and 97 women; age, 55.9+/-14.3 years; body mass index [BMI], 23.8+/-4.1 kg/m2 [mean+/-SD]). Thirty-one subjects were treated with diet therapy alone, 66 with sulfonylurea (SU), and 79 with insulin (including 29 with type I diabetes mellitus). Body fat was analyzed by the impedance method. Serum leptin levels significantly correlated with the BMI and body fat and were higher in women, mainly because of their greater body fat. Serum C-peptide concentrations positively correlated with body fat and serum leptin in subjects treated with diet and SU. In insulin-treated type II diabetic subjects, both serum C-peptide and the daily insulin dose were weakly associated with body fat and serum leptin. In those subjects, despite a lower percent body fat and body fat mass, serum leptin concentrations (10.3+/-8.4 ng/mL) were comparable to the levels in subjects treated with diet (8.8+/-8.5 ng/mL). When compared within the same BMI and body fat groups (BMI 20 to 25 and > 25 kg/m2) including the control subjects matched for age and sex, serum leptin levels were higher in insulin-treated type II diabetic subjects versus the control subjects and diabetic patients treated with diet or SU. Stepwise regression analysis for all of the diabetic subjects showed that both the serum C-peptide level and exogenous insulin administration, as well as the BMI, gender, and age, were determinants of the serum leptin level. In conclusion, endogenous insulin secretion is closely associated with body fat and serum leptin in diabetic subjects treated with diet therapy and SU. In Japanese insulin-treated type II diabetic subjects, both endogenous and exogenous insulin are associated with body fat and serum leptin, which is maintained at levels comparable to or somewhat higher than the levels in control subjects and diabetic patients treated without insulin.     

Magnetic Barkhausen emission study in heat-treated Fe-Nb-Cu-Si-B alloy

Magnetic hysteresis and magnetic Barkhausen emission (MBE) parameters have been studied for as-received and annealed Fe/sub 72/Nb/sub 4.5/Cu/sub 1/Si/sub 13.5/B/sub 9/ alloys. The coercivity rapidly decreased at the initial stage of annealing, in contrast to the slow change of root-mean-square voltage of Barkhausen emissions. The amplitude of the Barkhausen emission signal reduced almost to the background noise level at an intermediate annealing temperature, at which the material exhibited superior soft magnetic properties. Pulse height distribution of the MBE signal showed the existence of a large number of small amplitude pulses at the intermediate range of annealing, an indication that the magnetization process of the system is dominated by the rotation of the magnetization vector within a small volume of nanocrystalline particles. We explain the results by a random anisotropy model, assuming the exchange coupling between the Fe/sub 80/Si/sub 20/ nanograins of higher magnetic moment takes place through the magnetically weaker amorphous matrix.