Interface Characteristics and Laboratory Constructability Tests of Novel Fiber-Reinforced Polymer/Concrete Piles

Conventional pile materials such as steel, concrete, and timber are prone to deterioration for many reasons. Fiber-reinforced polymer (FRP) concrete composites represent an alternative construction material for deep foundations that can eliminate many of the performance disadvantages of traditional piling materials. However, FRP composites present several difficulties related to constructability, and the lack of design tools for their implementation as a foundation element. This paper describes the results of an experimental study on frictional FRP/dense sand interface characteristics and the constructability of FRP–concrete composite piles. An innovative toe driving technique is developed to install the empty FRP shells in the soil and self-consolidating concrete is subsequently cast in them. The experimental program involves interface shear tests on small FRP samples and uplift load tests on large-scale model piles. Two different FRP pile materials with different roughness and a reference steel pile are examined. Static uplift load tests are conducted on different piles installed in soil samples subjected to different confining pressures in the pressure chamber. The results showed that the interface friction for FRP materials compared favorably with conventional steel material. It was shown that toe driving is suitable for installation of FRP piles in dense soils.     

Selective Recovery of Cadmium,Cobalt, and Nickel from Spent Ni–Cd Batteries Using Adogen® 464 and Mesoporous Silica Derivatives

Spent Ni–Cd batteries are now considered an important source for many valuable metals. The recovery of cadmium, cobalt, and nickel from spent Ni–Cd Batteries has been performed in this study. The optimum leaching process was achieved using 20% H₂SO₄, solid/liquid (S/L) 1/5 at 80 °C for 6 h. The leaching efficiency of Fe, Cd, and Co was nearly 100%, whereas the leaching efficiency of Ni was 95%. The recovery of the concerned elements was attained using successive different separation techniques. Cd(II) ions were extracted by a solvent, namely, Adogen^® 464, and precipitated as CdS with 0.5% Na₂S solution at pH of 1.25 and room temperature. The extraction process corresponded to pseudo-2nd-order. The prepared PTU-MS silica was applied for adsorption of Co(II) ions from aqueous solution, while the desorption process was performed using 0.3 M H₂SO₄. Cobalt was precipitated at pH 9.0 as Co(OH)₂ using NH₄OH. The kinetic and thermodynamic parameters were also investigated. Nickel was directly precipitated at pH 8.25 using a 10% NaOH solution at ambient temperature. FTIR, SEM, and EDX confirm the structure of the products.     

Evaulation of irritation potential of surfactant mixtures

Irritation potential of sodium laureth sulfate (SLES) alone, and in combination with lauryl glucoside (LG), polysorbate 20 (PS) and cocoamidopropyl betaine (CAPB) was tested in 13 human subjects. Four main and six sub-formulations were prepared and evaluated. Formulations were applied to the forearm as a 24 h close patch study. Irritation was scored by two different methods using an in vivo clinical protocol based on visual scoring and on the stratum corneum capacitance measurement. Irritation was found to be dose dependent. At 2 mg/patch level ten subjects did not show any skin reaction. At 20 mg/patch level eleven subjects showed a broad range of skin irritation. The highest irritation was observed with the formula that contained SLES, LG, and cocamide DEA together. Among the sub-formulations, cocamide DEA showed the highest irritation grade. A statistically significant correlation was observed between visual, clinical and corneometer scores. It was concluded that the irritation potential of surfactants was related to the total surfactant concentration, application mode, and the thermodynamic activity of molecules in the solution as well as the chemical structure of the surfactant molecules.     

On business process monitoring using cross-flow coordination

This paper presents an approach for monitoring the execution progress of business processes. The monitoring focuses on the exceptions that could arise during this execution and, hence, could make the processes fail if not handled properly and timely. The approach relies on three flows known as control, communication, and navigation. The control flow connects tasks together with respect to a certain business logic. The communication flow captures the messages exchanged between persons/machines when they perform tasks of processes. Finally, the navigation flow captures the interactions between specialized networks that offer solutions to exceptions. These networks are built upon relations between tasks, between persons, and between machines. The coordination of control, communication, and navigation flows focuses on both the actions that are taken and the messages that are exchanged when handling exceptions. A system demonstrating flow development and coordination is, also, presented in the paper.     

Comparison studies between cement and cement-kaolinite properties for incorporation of low-level radioactive wastes

Comparison between the properties of cement and cement mixed with 7.5% kaolinite was performed to choose the most suitable matrix to incorporate radio-active wastes. The cement-kaolinite mixtures were prepared as uncured, cured, and heated specimens. The physical properties of the cement-kaolinite mixture, namely density, porosity, and water absorption percent, were determined. Compressive strength, infrared spectra, thermal analysis, and the effect of gamma rays on the samples were studied. The studies were extended to the cement-kaolinite mixture in the presence of some chemical additives at different concentrations. Leachability of radioactive isotopes from the cement-kaolinite mixture was measured as a function of time. The physical and mechanical properties of cement were decreased in the presence of 7.5% kaolinite, whereas ¹³⁷Cs and ⁶⁰Co were less leached from the cement-kaolinite mixture.     

The impact of supplementing goats' milk with quinoa extract on some properties of yoghurt

This study investigated the impact of supplementing goats' milk with quinoa extracts, in the range of 5, 10 and 15 g/100 g on the milk fermentation. The properties of yoghurt produced from this milk, which include viscosity, microstructure and sensory acceptability, were assessed. The supplementation of goats' milk with quinoa extracts, particularly permeate extract, reduced the fermentation time and enhanced the viability of lactic acid bacteria. Supplementation of yoghurt with increased levels of quinoa extracts increased the apparent viscosity and changed the yoghurt protein matrix. Panellists highly accepted the yoghurt that contained quinoa permeate extract.     

Adsorption of U(Ⅵ) from acid solution on a low-cost sorbent:equilibrium,kinetic, and thermodynamic assessments

In this paper, waste clay was cured with ethyl acetate to obtain treated clay(TC), which was modified with gallic acid to obtain a low-cost sorbent that was characterized by EDX, SEM, and FTIR analysis. Uranium(Ⅵ) adsorption was achieved using the batch adsorption method on the TC and gallic acid-modified treated clay(GMTC). The maximum uptakes of U(Ⅵ) on TC and GMTC were 37.2 and 193.0 mg/g, respectively.The U(Ⅵ) adsorption kinetics on the TC and GMTC sorbents were well-fitted by the pseudo-second-order mechanism, and the adsorption equilibrium followed the Langmuir model. The optimum parameters were applied to El Sela leach solution for uranium recovery.     

A symbolic algorithm for lazy synthesis of eager strategies

Acta Informatica - We present an algorithm for solving two-player safety games that combines a mixed forward/backward search strategy with a symbolic representation of the state space. By combining...     

Analysis of current-voltage characteristics of Al/p-ZnGa2Se4/n-Si nanocrystalline heterojunction diode

The polycrystalline ZnGa₂Se₄ thin film was prepared by thermal evaporation technique on n-Si wafer followed by annealing at 700 K. Then, the Al/p- ZnGa₂Se₄/n-Si/Al heterojunction diode was fabricated. XRD pattern shows that the annealed ZnGa₂Se₄ film has a polycrystalline structure. AFM images indicate that the ZnGa₂Se₄ film is formed of nanoparticles. The dark current-voltage characteristics of the heterojunction diode at various temperatures have been investigated to determine the electrical parameters and conduction mechanism. The Al/p-ZnGa₂Se₄/n-Si/Al diode shows a rectification ratio of 2.644 × 10² at ±2 V at room temperature. It was found that at forward bias voltages ≤0.5 V, the conduction mechanism of the diode is controlled by the thermionic emission mechanism, while at bias voltages higher than 0.5 V, it is controlled by the space charge limited current mechanism. The series resistance R_s, the ideality factor n and the barrier height ?_b values of the diode are determined by performing different plots from the forward current-voltage characteristics. The reverse current mechanism of the diode is controlled by the carrier generation-recombination process in the depletion region. The obtained results show that the Al/p-ZnGa₂Se₄/n-Si/Al heterojunction is a good candidate for the electronic device applications.