Estimating Bounds on Fracture Stresses Determined from Mirror Size Measurements

Statistical techniques are used to derive closed-form, approximate solutions for estimating a standard deviation on the fracture stress determined from mirror size measurements. The estimated coefficient of variation of fracture stress is noted to be twice as sensitive to the variation of the mirror constant, A _j , as to the variation in the measured boundary radius, r _j . This allows the hackle radius to be reasonably estimated and bounded from the mirror and branch radii when it cannot be clearly delineated.     

Use of the acute cardiac ischemia time-insensitive predictive instrument (ACI-TIPI) to assist with triage of patients with chest pain or other symptoms suggestive of acute cardiac ischemia. A multicenter, controlled clinical trial

BACKGROUND: Approximately 6 million U.S. patients present to emergency departments annually with symptoms suggesting acute cardiac ischemia. Triage decisions for these patients are important but remain difficult. OBJECTIVE: To test whether computerized prediction of the probability of acute ischemia, used with electrocardiography, improves the accuracy of triage decisions. DESIGN: Controlled clinical trial. SETTING: 10 hospital emergency departments in the midwestern, southeastern, and northeastern United States. PATIENTS: 10689 patients with chest pain or other symptoms suggestive of acute cardiac ischemia. INTERVENTION: The probability of acute ischemia predicted by the acute cardiac ischemia time-insensitive predictive instrument (ACI-TIPI), either automatically printed or not printed on patients' electrocardiograms. MEASUREMENTS: Emergency department triage to a coronary care unit (CCU), telemetry unit, ward, or home. Other measurements were the bed capacity of the CCU relative to that of the telemetry unit; training or supervision status of the triaging physician; and patient diagnoses and outcomes based on clinical, electrocardiographic, and creatine kinase data. RESULTS: For patients without cardiac ischemia, in hospitals with high-capacity CCUs and relatively low-capacity cardiac telemetry units, use of ACI-TIPI was associated with a reduction in CCU admissions from 15% to 12%, a change of -16% (95% CI, -30% to 0%), and an increase in emergency department discharges to home from 49% to 52%, a change of 6% (CI, 0% to 14%; overall P=0.09). Across all hospitals, for patients evaluated by unsupervised residents, use of ACI-TIPI was associated with a reduction in CCU admissions from 14% to 10%, a change of -32% (CI, -55% to 3%); a reduction in telemetry unit admissions from 39% to 31%, a change of -20% (CI, -34% to -2%); and an increase in discharges to home from 45% to 56%, a change of 25% (CI, 8% to 45%; overall P=0.008). Among patients with stable angina, in hospitals with high-capacity CCUs, use of ACI-TIPI was associated with a reduction in CCU admissions from 26% to 13%, a change of -50% (CI, -70% to -17%), and an increase in discharges to home from 20% to 22%, a change of 10% (CI, -29% to 71%; overall P=0.02). At hospitals with high-capacity telemetry units, use of ACI-TIPI was associated with a reduction in telemetry unit admissions from 68% to 59%, a change of -14% (CI, -27% to 1%), and an increase in emergency department discharges to home from 10% to 21%, a change of 100% (CI, 22% to 230%; overall P=0.02). Among patients with acute myocardial infarction or unstable angina, use of ACI-TIPI did not change appropriate admission (96%) to the CCU or telemetry unit at hospitals with high-capacity CCUs or telemetry units. CONCLUSIONS: Use of ACI-TIPI was associated with reduced hospitalization among emergency department patients without acute cardiac ischemia. This result varied as expected according to the CCU and cardiac telemetry unit capacities and physician supervision at individual hospitals. Appropriate admission for unstable angina or acute infarction was not affected. If ACI-TIPI is used widely in the United States, its potential incremental impact may be more than 200000 fewer unnecessary hospitalizations and more than 100000 fewer unnecessary CCU admissions.     

Thermal Shock Behavior of Silicon Nitride Flexure Beam Specimens with Indentation Cracks

The experimental results of thermal shock testing of silicon nitride flexure beam specimens containing indentation cracks are presented. The thermal stress induced by water quenching is much greater in the transverse direction than in the longitudinal direction, resulting in an insensitivity of residual bend strength to temperature differences up to 580°C. This result indicates that a flexure beam configuration is not an appropriate geometry for thermal shock testing when thermal shock behavior is to be evaluated from residual bend strength data.     

Dielectric properties of poly(vinyl chloride) in tetrahydrofuran and cyclohexanone

The dielectric absorption and dispersion of poly(vinyl chloride), M M_v = 49 000, in THF and in cyclohexanone have been studied over a frequency range of 120 kHz to 11·0 MHz, at temperatures from ?22·5 to 35°C, and at concentrations ranging from 4 to 12·0(w/v)% PVC/THF and from 2 to 8·0(w/v)% PVC/cyclohexanone. The viscosities of the two systems have also been measured at temperatures from 20 to 50°C. A single relaxation time was found (β = 0·8–1·0), which indicates that relaxation occurs by segmental rotation. The dielectric and viscous activation energies have been calculated. The dipole moment associated with the relaxation process has also been calculated. The relaxation time, dielectric and viscous activation energies and the dipole moment were found to be dependent on the type of solvent. The dipole moment also showed a molecular weight dependence. The influence of the concentration and temperature on the apparent dipole moment and on the relaxation time is discussed.     

Structural evolution and superplastic formability of friction stir welded AA 2095 sheets

Friction stir welding was used to join superplastic AA 2095 sheets. The effect of welding rate on the grain size distribution and grain boundary misorientations in the stir zone was investigated. The superplastic behavior of the weld nugget parallel to the welding direction was also characterized at 495 °C and strain rates from 10⁻⁴s⁻¹ to 10⁻²s⁻¹. Increasing the welding rate during friction stir welding augmented the formation of a fine-equiaxed high-angle grain boundary structure within the stir zone. Increasing intensity of plastic straining during friction stir welding resulted in enhanced properties during subsequent superplastic formation. The maximum strain-to-failure was obtained for the weld made at a tool speed of 1000 rpm and a weld rate of 4.2 mm/s when tested at a superplastic forming strain rate of 10⁻³s⁻¹.     

The pKa values of phosphonates and their influence on dyeing wool with Alizarine Sky Blue BLW

Phosphonates when adsorbed by wool fibres prior to dyeing with Alizarine Sky Blue BLW cause a marked increase in rate of dyeing. This increase is parallel to the pK_a values of the phosphonates.     

Study and characterization of porous copper oxide produced by electrochemical anodization for radiometric heat absorber

The aim of this work is to optimize the different parameters for realization of an absorbing cavity to measure the incident absolute laser energy. Electrochemical oxidation is the background process that allowed the copper blackening. A study of the blackened surface quality was undertaken using atomic force microscopy (AFM) analysis and ultraviolet-visible-infrared spectrophotometry using a Shimadzu spectrophotometer. A two-dimensional and three-dimensional visualization by AFM of the formed oxide coating showed that the copper surfaces became porous after electrochemical etching with different roughness. This aspect is becoming more and more important with decreasing current density anodization. In a 2 mol L ^-1 of NaOH solution, at a temperature of 90°C, and using a 16 mA cm² constant density current, the copper oxide formed has a reflectivity of around 3% in the spectral range between 300 and 1,800 nm. Using the ‘mirage effect’ technique, the obtained Cu₂O diffusivity and thermal conductivity are respectively equal to (11.5 ± 0.5) 10 to 7 m² s^-1 and (370 ± 20) Wm^-1 K^-1. This allows us to consider that our Cu₂O coating is a good thermal conductor. The results of the optical and thermal studies dictate the choice of the cavity design. The absorbing cavity is a hollow cylinder machined to its base at an angle of 30°. If the included angle of the plane is 30° and the interior surface gives specular reflection, an incoming ray parallel to the axis will undergo five reflections before exit. So the absorption of the surface becomes closely near 0.999999.     

Cobalt/copper-decorated carbon nanofibers as novel non-precious electrocatalyst for methanol electrooxidation

In this study, Co/Cu-decorated carbon nanofibers are introduced as novel electrocatalyst for methanol oxidation. The introduced nanofibers have been prepared based on graphitization of poly(vinyl alcohol) which has high carbon content compared to many polymer precursors for carbon nanofiber synthesis. Typically, calcination in argon atmosphere of electrospun nanofibers composed of cobalt acetate tetrahydrate, copper acetate monohydrate, and poly(vinyl alcohol) leads to form carbon nanofibers decorated by CoCu nanoparticles. The graphitization of the poly(vinyl alcohol) has been enhanced due to presence of cobalt which acts as effective catalyst. The physicochemical characterization affirmed that the metallic nanoparticles are sheathed by thin crystalline graphite layer. Investigation of the electrocatalytic activity of the introduced nanofibers toward methanol oxidation indicates good performance, as the corresponding onset potential was small compared to many reported materials; 310 mV (vs. Ag/AgCl electrode) and a current density of 12 mA/cm² was obtained. Moreover, due to the graphite shield, good stability was observed. Overall, the introduced study opens new avenue for cheap and stable transition metals-based nanostructures as non-precious catalysts for fuel cell applications.     

Structural and optical properties of Co-doped ZnS nanoparticles synthesized by a capping agent

Cobalt-doped Zinc sulfide (ZnS) nanoparticles were prepared by a simple chemical method using alkyl hydroxyl ethyl dimethyl ammonium chloride (YH) as capping agent. The structural and optical properties of prepared cobalt-doped ZnS nanoparticles have been characterized. X-ray diffraction patterns and transmission electron microscope images reveal pure cubic ZnS phase with size of about 5–2 nm for all cobalt-doped ZnS nanoparticles. The lattice constant of the samples decreases slightly by the introduction of Co²⁺ The absorption edge of the ZnS:Co²⁺ nanoparticles is blue-shifted as compared with that of bulk ZnS, indicating the quantum confinement effect. The photoluminescence emission band exhibits a blue shift for Co-doped ZnS nanoparticles as compared to the ZnS nanoparticles.