Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

Arterial reactivity is enhanced in genetic males taking high dose estrogens

OBJECTIVES: We sought to assess whether high dose estrogen treatment is associated with enhanced arterial reactivity in genetic males. BACKGROUND: Although estrogens have been shown to enhance arterial reactivity in women, and are thereby thought to confer cardiovascular benefit, the vascular effects of long-term estrogen therapy in genetic males is unknown. METHODS: We studied the arterial physiology of 30 genetic males--15 male to female transsexuals receiving long-term high dose estrogen therapy and 15 healthy male control subjects matched for age, smoking history and vessel size. Using external vascular ultrasound, brachial artery diameter was measured at rest, after flow increase (causing endothelium-dependent dilation [EDD]) and after nitroglycerin (GTN), an endothelium-independent dilator. Blood pressure, cholesterol and testosterone levels were also measured in each subject. RESULTS: Total testosterone and free testosterone index levels were lower in the transsexuals compared with the control subjects (p < 0.001). In contrast, EDD was significantly higher in the transsexuals than in the control males (mean [+/-SD] 7.1 +/- 3.1% vs. 3.2 +/- 2.8%, p = 0.001), as was the GTN response (21.2 +/- 6.7% vs. 14.6 +/- 3.3%, p = 0.002). Total and high density lipoprotein cholesterol, blood pressure levels and baseline vessel size were similar in the two groups. On multivariate analysis, enhanced EDD was associated independently with estrogen therapy (p = 0.02) and with low total cholesterol (p = 0.04). An enhanced GTN response was also significantly associated with estrogen therapy (p = 0.03). CONCLUSIONS: Long-term treatment with high dose estrogens is associated with enhanced arterial reactivity in genetic males, which may be due to the effects of estrogen excess or androgen deprivation, or both.     

A stereoselective cobalt-containing nitrile hydratase

Nitrile hydratase from Pseudomonas putida NRRL-18668 has been purified and characterized. The purified enzyme catalyzes the hydration of 2(S)-(4'-chlorophenyl)-3-methylbutyronitrile at least fifty times faster than that of 2(R)-(4'-chlorophenyl)-3-methylbutyronitrile. This enzyme is a member of the class of nitrile hydratase that contains cobalt. Visible absorption and CD spectra suggest the cobalt exists as a non-corrin low-spin Co3+ ion in a tetragonally-distorted octahedral ligand field. Chemical reduction of the native enzyme results in a species with the EPR signature of a low-spin Co2+ complex. Like the other cobalt-containing nitrile hydratases, this enzyme is relatively stable, maintaining its activity below 35 degrees C, and it shows a broad activity optimum between pH 7.2 and 7.8. The structural genes for this enzyme have been cloned and sequenced. The deduced amino acid sequences for the alpha and beta subunits show 48-63% and 35-41% homology, respectively, to other sequenced nitrile hydratases. In particular, the cysteine residues in the alpha subunit that have been suggested to coordinate the metal ion in the iron-containing nitrile hydratases [Brennan, B. A., Cummings, J. G., Chase, D. B., Turner, I. M., Jr., & Nelson, M. J. (1996) Biochemistry 35, 10068-10077] are conserved in this enzyme, suggesting that this nitrile hydratase, like the enzyme from Rhodococcus rhodochrous J1, is a member of a newly described class of metalloenzymes with Co3+-thiolate ligation [Brennan, B. A., Alms, G., Nelson, M. J., Durney, L. T., & Scarrow, R. C. (1996) J. Am. Chem. Soc. 118, 9194-9195].     

Validation of analytical capillary electrophoresis methods for use in a regulated environment

Since its introduction into the analytical laboratory, CE has had to prove that it was capable of generating results comparable to HPLC or GC techniques in the six areas (specificity, precision, accuracy, linearity, ruggedness, and range) typically required of validated methods intended for submission to governmental agencies. This paper will showcase the development and validation of two analytical methods: one for specific identification of HEPES (N-[2-hydroxyethyl]piperazine-N'-[2-ethane sulfonic acid]) and the other to quantitate millimolar concentrations of tris (tris[hydroxymethyl]aminomethane) in high electrolyte solutions. Utilizing neutral markers and internal standards, results for HEPES demonstrate that migration time reproducibility, expressed as %RSD of 2% or less on a variety of capillaries, is obtainable. Additionally, for quantitation of tris, the values obtained for accuracy (%relative mean bias), precision (%RSD), and linearity (r2) over multiple days and capillaries meet the rigorous standards we require of HPLC or GC methods.     

Transoesophageal echocardiographic assessment of haemodynamic function during laparoscopic cholecystectomy

We have measured cardiovascular changes associated with insufflation of carbon dioxide and the reverse Trendelenburg position during laparoscopic cholecystectomy, using transoesophageal echocardiography in 13 healthy patients. End-tidal carbon dioxide values increased after insufflation of carbon dioxide, with values significantly (P < 0.05) increased after lateral tilt positioning. Creation of a pneumoperitoneum was associated with increases (P < 0.05) in left ventricular end-systolic wall stress, concomitant with increases (P < 0.01) in peak airway pressure and systemic arterial pressure. In addition, left ventricular end-diastolic area decreased (P < 0.05) after reverse Trendelenburg positioning. Left ventricular ejection fraction was maintained throughout the study.     

Achieving synergy in collaborative education

Professional software engineering continues to face problems that involve large-scale (complex) software systems development. Such efforts typically require team collaboration over months, possibly years. Once implemented, the system must be maintained for sometimes decades. This development and maintenance life cycle requires not only technical knowledge and skills in software development, but also the knowledge and skills associated with software process. We believe the traditional computer science curriculum fails to consider this spectrum of needs. We also believe, however, that software engineering must use certain elements of the core knowledge and skills taught by computer scientists as its foundation. We describe lessons learned from the 10-year collaboration between Monmouth University and the Software Engineering Center of the US Army's CECOM (Communications Electronics Command). The center recruits electrical engineering and computer science graduates from academic institutions in the geographic regions surrounding its various installations to be part of its intern program; Monmouth University, in turn, incorporates the demands of the intern program in its Master of Science in software engineering curriculum     

Screen‐printed biosensor for allergens

Allergen levels in indoor environments, leading to many diseases, eg asthma, rhinitis and conjunctivitis, affect a large and increasing fraction of the population. A quite effective and inexpensive method of a rough but very rapid overall assessment of total allergen level in the environment has been developed. The method involved estimation of protein in allergen extracts by screen‐printed electrodes using two different techniques. The biosensor comprised a rhodinised carbon working electrode, a silver/silver chloride reference electrode and a carbon counter electrode. In the first method the enzyme protease reacted with allergen protein to release amino acid, which produced hydrogen peroxide in the presence of amino acid oxidase. This was detected amperometrically. The second method used potassium bromide as electrolyte and the electrode was subjected to dual potential. Bromine, released due to electrolysis at higher potential, was consumed by the allergen protein at lower potential. In the first method, a unique technique was used to microencapsulate the enzyme protease and immobilise it on the surface of the electrode by in‐situ polymerisation to avoid contact with the amino acid oxidase. A total of seven allergens were tested and the results gave a good correlation with the standard protein measurement method. Environmental specimens from indoors, schools and workplaces can be evaluated for the aeroallergens produced by dust mites, animal hairs, cockroach debris, pollens, etc as a means of determining the exposure risk. Copyright © 2005 Society of Chemical Industry     

Integrating heterogeneous distributed COTS discrete-event simulation packages: an emerging standards-based approach

This paper reports on the progress made toward the emergence of standards to support the integration of heterogeneous discrete-event simulations (DESs) created in specialist support tools called commercial-off-the-shelf (COTS) discrete-event simulation packages (CSPs). The general standard for heterogeneous integration in this area has been developed from research in distributed simulation and is the IEEE 1516 standard The High Level Architecture (HLA). However, the specific needs of heterogeneous CSP integration require that the HLA is augmented by additional complementary standards. These are the suite of CSP interoperability (CSPI) standards being developed under the Simulation Interoperability Standards Organization (SISO-http://www.sisostds.org) by the CSPI Product Development Group (CSPI-PDG). The suite consists of several interoperability reference models (IRMs) that outline different integration needs of CSPI, interoperability frameworks (IFs) that define the HLA-based solution to each IRM, appropriate data exchange representations to specify the data exchanged in an IF, and benchmarks termed CSP emulators (CSPEs). This paper contributes to the development of the Type I IF that is intended to represent the HLA-based solution to the problem outlined by the Type I IRM (asynchronous entity passing) by developing the entity transfer specification (ETS) data exchange representation. The use of the ETS in an illustrative case study implemented using a prototype CSPE is shown. This case study also allows us to highlight the importance of event granularity and lookahead in the performance and development of the Type I IF, and to discuss possible methods to automate the capture of appropriate values of lookahead.     

封装与测试——解决功率电子器件的热问题

纽约州立大学Buffalo分校电子封装实验室正在为美国海军开发新型的功率电子封装，在一些极端苛刻的工作条件下（比如在军舰和战机上）．它们能够解决大电流密度、高温和大的温度梯度所引起的种种问题。这类功率电子封装还有可能很快进入民用产品。     

Freestanding Alumina Membrane by Double-Layer Anodization

A novel method has been developed for fabricating full or partial freestanding anodic alumina. In our method a sacrificial metal layer is introduced between an Al film and a Si₃N₄ substrate. A freestanding alumina film at wafer scale is successfully achieved by anodizing the double metal layer, during which the alumina is spontaneously stripped off the Si₃N₄ substrate due to the anodic oxidation of the sacrificial layer. The barrier oxide of the alumina film is effectively removed either by H₃PO₄ dissolution or by CF₄ reactive ion etching. The freestanding alumina film is utilized as a contact mask to transfer its nanoporous pattern to a Si substrate. By patterning the sacrificial metal layer with contact lithography, a partial freestanding alumina film is successfully achieved on the silicon chip, producing a unique micro/nanofluidic channel. Compared with previous techniques, the method reported here is advantageous for its simplicity and flexibility