Accurate solid modeling using polyhedral approximations

Although curved-surface solid modeling systems achieve a higher level of accuracy than faceted systems, they also introduce a host of topological, geometric, and numerical complications. A method for calculating accurate boundary representations of solid models is introduced that reduces the impact of these complications. The method uses a pair of bounding polyhedral approximations to enclose the boundary of each object. A structural analysis automatically determines where to make adaptive refinements to the polyhedrons to assure the topological validity of the results. Potential singularities are localized. The implementation is an experimental extension to the Geometric Design Processor (GDP) solid modeling system     

Advances in ALCHEMI analysis

The ALCHEMI method for locating the sites of foreign atoms within crystals is known to be sensitive to the delocalized emission of X-rays. This can result in large errors in some cases through differences in delocalization for different excitations or by error amplification in the ratio method of analysis. An alternative approach to the analysis of ALCHEMI data, using multivariate statistical analysis, is extended to the case of multiple impurities. Initial results from zone-axis channelling experiments for a Yb-doped zirconolite (CaZrTi₂O₇) are shown to confirm the improved accuracy of this method, especially for axial orientations. Data were collected using a 400-keV analytical electron microscope fitted with an intrinsic Ge X-ray detector. The potential advantages for ALCHEMI analysis of Ge detectors are considered.     

项目成功标准(上)

导言 对于项目经理而言,项目成功是一个非常重要的问题.John Wateridge先生在其出版的一本著作(1995)[1]中谈到(我在其他地方也阐述过Turner,1999[2],Turner,2000[3]),有一个最为重要的因素决定着项目的成功.如果你不这样做,注定会走向失败;如果按照要求做,成功机会便会大大增加(尽管一些其他不利因素也可能会导致失败).     

Non-peptidic HIV protease inhibitors: C2-symmetry-based design of bis-sulfonamide dihydropyrones

Potent, non-peptidic, dihydropyrone sulfonamide HIV protease inhibitors have been previously described. Crystallographic analysis of dihydropyrone sulfonamide inhibitor/HIV protease complexes suggested incorporation of a second, C2 symmetry-related sulfonamide group. Selected bis-sulfonamide dihydropyrone analogues display high HIV protease inhibitory activity.     

Acute arthritis of cats associated with feline calicivirus infection

Twelve specific pathogen-free cats were infected either by intra-articular inoculation or by contact exposure to one of two strains of feline calicivirus (FCV), either F65, a field strain originating from an outbreak of lameness in a group of cats, or a vaccine strain. Following either route of exposure, both strains induced signs typical of FCV infection including oral and nasal ulceration, conjunctivitis and ocular discharge. These signs were of equal severity for both virus strains, but overall, following either route of infection, F65 induced more severe disease than the vaccine strain, with marked pyrexia, lethargy and lameness. Vaccine virus only induced a relatively mild lameness following intra-articular inoculation. Gross pathological and histopathological lesions were seen in some of the joints, but again changes were more severe in the F65-exposed cats. Virus was isolated from both normal and affected joints from both groups of F65-exposed cats, and from a joint from each cat inoculated intra-articularly with vaccine virus. Mild transient lameness was also seen in one of two control cats inoculated intra-articularly, but no pathological changes were seen or virus isolated from joints. A cDNA probe used in RNA dot blot hybridisation experiments was found to be specific and more sensitive than virus isolation in detecting FCV in selected tissues. This may be useful in future studies on the pathogenesis of FCV disease and in studies on viral persistence in FCV carriers.     

An improved photographic process for convergent beam electron diffraction applications

The use of a surface developer, pyrocatechol, to process transmission electron microscope negatives has been shown to have significant advantages over the conventional D-19 process. The process described here is tolerant of a large margin of error in the electron exposure and produces a negative that not only retains details both in the highlight as well as the faint regions, but also preserves local contrast. These characteristics are particularly useful in convergent beam electron diffraction applications where one encounters a wide contrast range. Improved acuteness and an enhanced signal to noise ratio due to the prolonged exposures associated with this process have also been observed.     

Viscoelastic behavior of flexible slabstock polyurethane foam as a function of temperature and relative humidity. II. Compressive creep behavior

The compression creep behavior was monitored at constant temperature and/or relative humidity for two slabstock foams with different hard-segment content. The tests were performed by applying a constant load (free falling weight) and then monitoring the strain as a function of time over a 3-h time period. A near linear relationship is obtained for linear strain versus log time after a short induction period for both foams and at most conditions studied (except at temperatures near and above 125°C). The slope of this relationship or the initial creep rate is dependent on the initial strain level, espcially in the range of 10–60% deformation. This dependence is believed to be related to the cellular structs buckling within this range of strain. At deformations greater than 60% and less than 10%, the solid portion of the foam is thought to control the compressive creep behavior in contrast to the cellular texture. Increasing relative humidity does cause a greater amount of creep to occur and is believed to be a result of water acting as a plasticizer. For low humidities increasing the temperature from 30 to 85°C, a decrease in the rate of creep is observed at a 65% initial deformation. At 125°C, an increase in the creep rate is seen and is believed to be related to chemical as well as additional structural changes taking place in the solid portion of the foams. The creep rate is higher for the higher hard-segment foam (34 wt %) than that of the lower (21 wt %) at all of the conditions studied and for the same initial deformation level. This difference is principally attributed to the greater amount of hydrogen bonds available for disruption in the higher hard-segment foam. © 1994 John Wiley & Sons, Inc.     

TTI hydraulics and erosion control laboratory research field performance of erosion-control blankets

Storm water management issues facing the Texas Department of Transportation in the late 1980s led to the development of a coordinated research program with the Texas Transportation Institute. Researchers developed methodologies for evaluating the field performance of various erosion control technologies of the most widely used products within the Department's construction and maintenance operations. From these methodologies, the Hydraulics and Erosion Control Laboratory was designed and constructed. Currently, participants include private industry (manufacturers of erosion control products), transportation researchers (TTI), and the public sector (TxDOT).The results reported in this paper reflect 2 years of erosion-control blanket research. The study objectives were to determine the effectiveness of erosion-control blankets on the growth of warm-season perennial grasses and their ability to prevent sediment loss in a sloped condition.The laboratory simulates the highway environment with the sloped plots (6 m in width) located on an earthen embankment that is 300 m in length and 6.75 m in height (94 ft. by 22 ft., vertically). A randomized experimental design was replicated on two soil types (sand and clay) for each slope condition (3:1 or 2:1) with a control.In general, the results indicate better combined results relating to sediment retention and vegetation establishment performance for erosion-control blankets on sandy soils (noncohesive) regardless of slope condition (3:1 or 2:1) or material type. A minimum of 50% more sediment was retained on the sandy treatment plots and a 45% more vegetation coverage was achieved compared with the control plots. When analyzed by material type related to performance, excelsior, synthetic blends, and straw/coconut blends performed the best. For clay soils (cohesive), regardless of slope condition (3:1 or 2:1), the combined results indicate a minimum of 75% more sediment was retained and a minimum of 5% more vegetation establishment was achieved compared with the control plots. When analyzed by material type related to performance, excelsior, straw, and straw/coconut blends performed the best.