Myocardial perfusion SPECT using the prone position improves inferior wall counts and decreases motion problems as compared with the usual supine position. Nonetheless, it is not suitable for women. In addition, it is associated with artifactual anteroseptal defects and hot spots. METHODS: The right lateral (RL) position was evaluated instead of the prone position in 72 patients (26 women). RL imaging was performed immediately after the supine imaging during a routine 2-day 99mTc-sestamibi exercise protocol. The SPECT images were scored semiquantitatively by three physicians. Moreover, regional myocardial counts, as well as extent and severity of defects, were assessed by quantitative polar map analysis. RESULTS: All patients tolerated the RL position well and there was no significant patient movement in either position. Higher inferior myocardial counts per pixel were observed in the RL than in supine images. Inferior wall defects (especially mild ones) were more common in the supine than the RL images, whereas defects in other regions were not different. Quantitative analysis confirmed these findings. Analysis of 34 patients with recent coronary arteriography revealed an overall coronary artery disease (CAD) supine- and RL-imaging specificity of 50% and 75%, respectively, and the sensitivities of both were 93%. Right CAD sensitivity, specificity and normalcy rates for the supine position were 100%, 44% and 55%, whereas those of the RL position were 94%, 75% and 90%, respectively. CONCLUSION: The RL position improves CAD diagnostic accuracy, particularly right CAD, without significant artifacts in other myocardial regions. Unlike the prone position, the RL position is well tolerated by both women and men. 相似文献
Superfluid3He in severely confined geometries is studied in the Ginzburg-Landau limit. Both A and B phases are analyzed in narrow slabs and in small cylinders. Physically measurable quantities include the superfluid density and the critical current, which are significantly suppressed by the boundaries. Related alterations in the phase diagram are also considered. For small lateral dimensions, the A phase can be favored even well below the polycritical pressure. 相似文献
The chemical durability of some selected glass-ceramic materials based on the Li2O- (MnO, CaO)MgO---Al2O3---SiO2 glass composition, has been determined by HCl, using the powder test.
The leachability of the glass-ceramic was gradually increased by replacing MgO with MnO, while it was decreased by addition of MnO instead of CaO. Calcium oxide had a retarding effect on the durability of the material when it was added instead of MgO and/or MnO. However, on the addition of Al2O3 in replacing Li2O, the durability of the material was markedly improved. The leaching data were found to be dependent mainly on the proportion of the glass oxide constituents i.e. MgO/MnO, CaO/MnO and Li2O/Al2O3 ratios present in the glasses.
The results were correlated to different views concerning the effect of various ions on the rate of interdiffusion between the crystalline-glass materials and leaching solution, the type, and proportions of the crystalline phases developed in glass-ceramics and residual glass phase. 相似文献
At Klöckner Edelstahl in Georgsmarienhütte improvements in steel cleanliness mentioned in this report were concentrated on the tundish and pouring channel. Sealing of the tundish with inert gas curbed reoxidation so that total oxygen after about 1 minute of casting was around 10 ppm, whereas this value was reached only after 25 minutes of casting in the case without inert gas sealing. Reoxidation in the pouring channel may be a danger because of the high pressure drops recorded. Therefore, stringent measures must be observed to prevent reoxidation in the tundish and the pouring channel. 相似文献
A design is described which enables the accurate alignment of high voltage plane parallel electrodes used in an ultra-high vacuum assembly. The main features of this design are that it effectively overcomes the eccentricities which are present in both the glass-to-metal graded seal used in the housing envelope and in the linear motion drives employed to vary the gap separation between the electrodes, as well as being relatively simple to fabricate. The present design has been successfully tested in two large chambers at applied voltages of up to 100 kV and at a background pressure of better than 10?9 torr. 相似文献
In this paper, numerical study of heat transfer in a conical annular cylinder fixed with saturated porous medium is presented. The heat transfer is assumed to take place by natural convection and radiation. The inner surface of conical cylinder is maintained at uniform wall temperature. The governing partial differential equations are non-dimensionalised using suitable non-dimensional parameters and then solved by using finite element method. The porous medium is divided using triangular elements with uneven element size. A computer software is used to solve the coupled momentum and energy equations in an iterative manner. The results are discussed for various values of geometric and physical parameters of porous medium with emphasis on cone angle of the cylinder. It is seen that the cone angle plays a vital role in heat transfer from the hot surface to porous medium. 相似文献
The role of radiations in textile processing is gaining attention due to its low cost, energy effectiveness and eco-friendly process. This study is concerned with the improvement in modulation of microwave assisted vat dyeing of cellulosic fiber. It was found that radiation treatment of both cotton fabric and dye solution for 1 min gives good color strength, while for redox reaction, 2.5 g of NaHSO3, 2 mL of CH3COOH, and 1.5 mL of H2O2 are the optimized conditions which show it is a cost-effective tool. Good color strength was obtained at 65 °C for 1 h dyeing using 50 mL of optimal solution in dye bath at pH 9. Finally, ISO standards for color fastness to light, washing, rubbing and perspiration were applied at 0.5–2.5% of shade at optimal conditions which showed that microwave treatment has enhanced the color characteristics. Hence, the technique can successfully and easily be employed for surface modification of fabric for good quality dyeing with various classes of dyes. 相似文献
In this paper, Eulerian, mixture and single phase models are used to simulate laminar and turbulent forced convective flow of SiO2‐EG nanofluid in a microtube. The comparison between the three approaches and other formula shows that for laminar and turbulent flow the single phase model shows higher heat transfer enhancement and is more precise in comparison to the other Eulerian and mixture models. 相似文献
This short communication reports on a radar approach for structural health monitoring of wind turbine blades. Therefore, a bistatic frequency‐modulated continuous wave (FMCW) radar in the frequency range from 33.4 to 36.0 GHz has been developed and tested experimentally using a laboratory wind turbine demonstrator. A differential damage localization framework is presented here that exploits signal differences between measurements from the intact and the damaged structure for 3D imaging of the defect. We have achieved the localization of a 30‐mm cut in a glass fiber composite structure as well as the localization of a water pack at the backside of the specimen with a localization error of several centimeters. 相似文献
Food Science and Biotechnology - Current study was designed to evaluate sensory and textural quality characteristics of chapatti, a commonly consumed flat bread in South-Asia in relation to flour... 相似文献