Twin structures in copper after shock and Shockless high-rate loading

The structure of copper formed after high-rate loading up to pressures of 20–80 GPa with a strain rate of 10⁵–10⁹ sec^?1 is considered. In situations with pressures above 20 GPa and strain rates above 10⁶ sec^?1, the deformation twins are grouped into packets, which are seen in an optical microscope as parallel bands of localized strains inside individual grains. The number of bands in the structure increases with increasing grain size and strain rate, with decreasing sample temperature, and with increasing period of sample loading. The characteristic time of formation of twin bands in copper is estimated as 0.3 µsec.     

Effect of W/C and superplasticizer type on rheological parameters of SCC repair mortar for gravitational or light pressure injection

The influence of pressure on the yield stress and plastic viscosity of SCC repair mortars was investigated using an adapted Marsh cone with cylindrical shear paddles. Twelve mortars proportioned with water over cement ratios from 0.45 to 0.55 and either Polycarboxylate ether (PCE), polyacrylate (PA) or polynaphtalene sulfonate (PNS) high-range water-reducing admixture (HRWRA) were prepared. Test results show that the exerted pressure, W/C and HRWRA type strongly influence the rheological response: the yield stress is mainly affected by HRWRA residual concentration, except for PCE mortars where sulfate ion concentration can play an important role. Plastic viscosity is mainly affected by solid friction between particles, the latter is influenced by HRWRA dosage and W/C. PA appears to be the most accurate HRWRA for light pressure injection, with less sensitivity to changes in pressure or W/C than PNS or PCE superplasticizers.     

Statistical profiles of highly-rated learning objects

The continuously growth of learning resources available in on-line repositories has raised the concern for the development of automated methods for quality assessment. The current existence of on-line evaluations in such repositories has opened the possibility of searching for statistical profiles of highly-rated resources that can be used as priori indicators of quality. In this paper, we analyzed 35 metrics in learning objects refereed inside the MERLOT repository and elaborated profiles for these resources regarding the different categories of disciplines and material types available. We found that some of the intrinsic metrics presented significant differences between highly rated and poorly-rated resources and that those differences are dependent on the category of discipline to which the resource belongs and on the type of the resource. Moreover, we found that different profiles should be identified according to the type of rating (peer-review or user) under evaluation. At last, we developed an initial model using linear discriminant analysis to evaluate the strength of relevant metrics when performing an automated quality classification task. The initial results of this work are promising and will be used as the foundations for the further development of an automated tool for contextualized quality assessment of learning objects inside repositories.     

High-density automotive hydrogen storage with cryogenic capable pressure vessels

LLNL is developing cryogenic capable pressure vessels with thermal endurance 5–10 times greater than conventional liquid hydrogen (LH₂) tanks that can eliminate evaporative losses in routine usage of (L)H₂ automobiles. In a joint effort BMW is working on a proof of concept for a first automotive cryo-compressed hydrogen storage system that can fulfill automotive requirements on system performance, life cycle, safety and cost. Cryogenic pressure vessels can be fueled with ambient temperature compressed gaseous hydrogen (CGH₂), LH₂ or cryogenic hydrogen at elevated supercritical pressure (cryo-compressed hydrogen, CcH₂). When filled with LH₂ or CcH₂, these vessels contain 2–3 times more fuel than conventional ambient temperature compressed H₂ vessels. LLNL has demonstrated fueling with LH₂ onboard two vehicles. The generation 2 vessel, installed onboard an H₂-powered Toyota Prius and fueled with LH₂ demonstrated the longest unrefueled driving distance and the longest cryogenic H₂ hold time without evaporative losses. A third generation vessel will be installed, reducing weight and volume by minimizing insulation thickness while still providing acceptable thermal endurance. Based on its long experience with cryogenic hydrogen storage, BMW has developed its cryo-compressed hydrogen storage concept, which is now undergoing a thorough system and component validation to prove compliance with automotive requirements before it can be demonstrated in a BMW test vehicle.     

Sensory acceptability of slow fermented sausages based on fat content and ripening time

Low fat dry fermented sausages were manufactured using controlled ripening conditions and a slow fermented process. The effect of fat content and ripening time on the chemical, colour, texture parameters and sensory acceptability was studied. The fat reduction in slow fermented sausages produced an increase in the pH decline during the first stage of the process that was favoured by the higher water content of the low fat sausages. Fat reduction did not affect the external appearance and there was an absence of defects but lower fat content resulted in lower sausage lightness. The sausage texture in low fat sausages caused an increase in chewiness and at longer ripening times, an increase in hardness. The sensory acceptability of the fermented sausages analyzed by internal preference mapping depended on the different preference patterns of consumers. A group of consumers preferred sausages with high and medium fat content and high ripening time. The second group of consumers preferred sausages with low ripening time regardless of fat content except for the appearance, for which these consumers preferred sausages of high ripening time. Finally, the limit to produce high acceptability low fat fermented sausages was 16% fat content in the raw mixture that is half the usual content of dry fermented sausages.     

An alpha-tectorin gene defect causes a newly identified autosomal recessive form of sensorineural pre-lingual non-syndromic deafness, DFNB21

In our efforts to identify new loci responsible for non-syndromic autosomal recessive forms of deafness, DFNB loci, we have pursued the analysis of large consanguineous affected families living in geographically isolated areas. Here, we report on the study of a Lebanese family comprising nine members presenting with a pre-lingual severe to profound sensorineural isolated form of deafness. Linkage analysis led to the characterization of a new locus, DFNB21, which was assigned to chromosome 11q23-25. Already mapped to this chromosomal region was TECTA. This gene encodes alpha-tectorin, a 2155 amino acid protein which is a component of the tectorial membrane. This gene recently has been shown to be responsible for a dominant form of deafness, DFNA8/12. Sequence analysis of the TECTA gene in the DFNB21-affected family revealed a G to A transition in the donor splice site (GT) of intron 9, predicted to lead to a truncated protein of 971 amino acids. This establishes that alpha-tectorin mutations can be responsible for both dominant and recessive forms of deafness. Comparison of the phenotype of the DFNB21 heterozygous carriers with that of DFNA8/12-affected individuals supports the hypothesis that the TECTA mutations which cause the dominant form of deafness have a dominant-negative effect. The present results provide genetic evidence for alpha-tectorin forming homo- or heteromeric structures.     

Subsolidus Phase Relations in the Pseudoternary System SrO·6M2O3 (M = Fe, Cr, Al) in Air

Crystalline powder samples belonging to the pseudoternary system SrO·6M₂O₃ (M = Fe, Al, Cr) were synthesized in air. The limit of the magnetoplumbite-type (M-type) phase solid solution is governed by the presence of Cr³⁺ in the structure and is accompanied by the formation of a chromate and a sesquioxide. The extension of the solid solution in the Cr-containing pseudobinaries depends to a large extent on the crystallographic site preference of the host cation. The extension of the M-type solid solution is also narrowed at a lower temperature.     

A time temperature integrator for particulated foods: thermal process evaluation

 A time temperature integrator (TTI) was developed by immobilizing Bacillus stearothermophilus spores in a cylindrical particle consisting of an alginate-starch-mushroom purée. The particle showed homogeneous spore distribution, and when heated over a temperature range of 121 – 130° C negligible spore leakage was observed after the thermal process. The experimental data on spore survivor levels obtained for each temperature-time combination were compared with theoretical predictions using a mathematical model. The results showed a good correlation between the experimental and theoretical data. All these results provide evidence that this artificial particle could be a very reliable TTI for monitoring the thermal impact on micro-organisms during validating sterilization processes in continuous aseptic systems. Received: 25 February 1997     

Otogelin: a glycoprotein specific to the acellular membranes of the inner ear

Efforts to identify the specific components of the mammalian inner ear have been hampered by the small number of neuroepithelial cells and the variety of supporting cells. To circumvent these difficulties, we used a PCR-based subtractive method on cDNA from 2-day-old mouse cochlea. A cDNA encoding a predicted 2910-amino acid protein related to mucin has been isolated. Several lines of evidence indicate, however, that this protein does not undergo the O-glycosylation characteristic to mucins. As confirmed by immunocytochemistry and biochemical experiments, this protein is specific to the inner ear. Immunohistofluorescence labeling showed that this protein is a component of all the acellular membranes of the inner ear: i.e., the tectorial membrane of the cochlea, the otoconial and accessory membranes of the utricule and saccule, the cupula of the semicircular canals, and a previously undescribed acellular material covering the otoconia of the saccule. The protein has been named otogelin with reference to its localization. A variety of nonsensory cells located underneath these membranes could be identified as synthesizing otogelin. Finally, this study revealed a maturation process of the tectorial membrane, as evidenced by the progressive organization of otogelin labeling into thick and spaced radial fiber-like structures.