Electrical capacitance tomography as a monitoring tool for high-shear mixing and granulation

Electrical capacitance tomography (ECT) was utilized for monitoring of high-shear mixing and high-shear granulation processes. A finite element method (FEM)-based reconstruction algorithm was utilized to take into account the specific geometrical characteristics of the experimental set-up. Two-dimensional ECT tomograms, mixing index curves and permittivity fractions were computed based on the measurements, and their suitability in the analysis of the processes was assessed. It was found that the different mixing processes and the different granulation processes could be analyzed based on these quantities.     

Preparation of nanocomposite dispersions based on cellulose whiskers and acrylic copolymer by miniemulsion polymerization: Effect of the silane content

A one‐step method was used to prepare stable aqueous nanocomposite dispersions based on cellulose whiskers extracted from the rachis of the date palm tree and a poly(styrene‐co‐2‐ethyl hexylacrylate) copolymer via miniemulsion polymerization. A reactive silane, i.e., methacryloxypropyl triethoxysilane was added to stabilize the dispersion and favor the anchoring of the whiskers on polymer particles. Dynamic light scattering was used to study the effect of the silane and whiskers contents on the average particle size of the polymer. Nanocomposites materials were prepared from these dispersions using a casting/evaporation method. The effect of the silane and whiskers contents on the thermal and mechanical properties were studied using differential scanning calorimetry and dynamic mechanical analysis. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

CORRELATIONS FOR ESTIMATING THE DIFFUSIVITIES OF NITROUS OXIDE IN AQUEOUS SOLUTIONS OF DIETHANOLAMINE AND N-METHYLDIETHANOLAMINE AND THE SOLUTION DENSITIES AND VISCOSITIES

Experimentally measured diffusion coefficients of nitrous oxide in water, aqueous solutions of diethanolamine, aqueous solutions of N-methyldiethanolamine, and aqueous blends of diethanolamine and N-methyldiethanolamine have been used to arrive at a modified Stokes-Einstein correlation by using nonlinear least-squares filling. The average deviation of this correlation from the experimentally measured diffusion coefficients is about 13%. Comparisons are also made to the estimated diffusivities of nitrous oxide in the amine solutions which are obtained from the Wilke-Chang and Hayduk-Minhas correlations. The average deviations of the Wilke-Chang and Hayduk-Minhas correlations from the measured values are about 13% and 19%, respectively. Correlations were also presented for estimating the solution densities and viscosities. Predicted values for the solution densities and viscosities from these correlations deviate from experimentally measured values on average by 1.2% and 4.8% respectively.     

Stabilization of refined olive oil by enrichment with chlorophyll pigments extracted from Chemlali olive leaves

This paper presents the first investigation on the effect of enrichment refined olive oil by chlorophyll pigment extracted from Chemlali olive leaves during storage (6 months). The changes that occurred in the quality indices, fatty acids, sterol, and phenolic content were investigated during the storage of refined olive oil under RT (20°C) and accelerated conditions (50°C) in the dark. Additionally, the pigments (chlorophyll and carotene) changes during 6 months of oil storage were evaluated. At the end of the storage, more than 90% of chlorophyll pigments decomposed in all samples, while, carotene pigment loss was lower showing up to 60 and 85% loss for oil stored at 20 and 50°C, respectively, at the end of storage. The reduction of total phenolic compounds exhibited similar degradation profiles, being reduced by 5% and up to 60% for the enriched refined olive oil stored at 20 and 50°C in 6 months, respectively. In the fatty acid composition, an increase in oleic acid and a decrease in linoleic and linolenic acids were less significant in enriched than non‐enriched refined olive oil. On the other hand, sterol composition was less affected by storage in enriched oil samples. However, the sterol concentration of the oil samples showed an increase in β‐sitosterol, 24‐methylene cholesterol, stigmasterol, and a decrease in cholesterol, Δ5, 24‐stigmastadienol percentage at the end of storage. Based on the Rancimat method, the oils with added leaf pigment extract had the lowest peroxide value and the highest stability. After 6 months of storage, the oxidative resistance of refined olive oil fell to 0.2 and to zero for enriched refined olive oil stored at 20 and 50°C, respectively.     

Dynamic Modeling and a Parametric Study of an Indirect Solar Cabinet Dryer

A dynamic mathematical model for drying of agricultural products in an indirect cabinet solar dryer is presented. This model describes the heat and mass transfer in the drying chamber and also considers the heat transfer and temperature distribution in a solar collector under transient conditions. For this purpose, using conservation laws of heat and mass transfer and considering the physical phenomena occurring in a solar dryer, the governing equations are derived and solved numerically. The model solution provides an effective tool to study the variation of temperature and humidity of the drying air, drying material temperature, and its moisture content on each tray. The predicted results are compared with available experimental data. It is shown that the model can predict the performance of the cabinet solar dryer in unsteady-state operating conditions well. Furthermore, the effect of some operating parameters on the performance and efficiency of dryer is investigated and compared with selected published data.     

Mangrove Oyster (Crassostrea belcheri) as a Biomonitor Species for Bioavailability of Polycyclic Aromatic Hydrocarbons (PAHs) from Sediment of the West Coast of Peninsular Malaysia

ABSTRACT

Rapid industrialization and urbanization in the west coast of Peninsular Malaysia has caused increasing pollution particularly of petroleum and petroleum by-products. Surface sediment and mangrove oyster (Crassostrea belcheri) were collected from five mangrove ecosystems in the west coast of Peninsular Malaysia and investigated for bioavailability of polycyclic aromatic hydrocarbons (PAHs). Sampling locations were selected from both remote areas with few or no previous records of petroleum pollution such as Pulau Merambong and polluted areas that are under international attention such as Klang mangrove ecosystem. PAH fractions were obtained through soxhlet extraction and two-step column chromatography and the fractions were injected to gas chromatography-mass spectrometry (GC-MS) for analysis. The concentrations of PAHs ranged from 151 to 4973 ng g^?1 dw in the sediments, while from 309 to 2225 ng g^?1 dw in the oysters. When tested for diagnostic ratios, a predominance of pyrogenic source PAHs was detected in the sediments, whereas PAHs in the oysters had mixed petrogenic and pyrogenic sources. A significant correlation (p < 0.05) was found between high molecular weight (HMW) PAHs in the sediments and oysters and biota accumulation factors (BAFs) of PAHs were approaching or exceeding unity indicating the ability of mangrove oyster in bioaccumulation of PAHs. Overall, this study indicates that mangrove oyster (C. belcheri) can be used as a biomonitor species for PAHs in an aquatic environment.     

Behavior of structural polymer-modified concrete containing recycled aggregates

The use of recycled concrete aggregate (RCA) in structural applications is hindered by the inferior concrete mechanical performance and unpredictable behavior with embedded steel reinforcement. The main objective of this paper is to evaluate whether the addition of small amounts of styrene-butadiene rubber (SBR) polymeric latexes could mitigate the drop in RCA concrete properties. Two series of mixtures prepared with 320 or 440 kg/m³ cement were tested by direct bond and beam-end methods; the SBR addition rates varied from 1 to 3% of cement mass. Test results showed that SBR could remarkably improve RCA concrete workability as well as compressive and splitting tensile strengths. The initial stiffness of load vs. slip curves was considerably accentuated, reflecting increased interfacial shear stresses between the reinforcing bar and surrounding concrete. Also, the responses of ascending curves showed extended nonlinear regions together with higher ultimate bond strengths at failure. The experimental direct bond and beam-end test data are compared with the design bond strengths determined by ACI 318-14, European Code EC-2, and fib Model Code MC2010.     

On-Line Characterization of Morphology and Water Adsorption on Fumed Silica Nanoparticles

The first wetting layer on solid nanoparticles has direct implications on the roles these particles play in industrial processes and technological applications as well as in the atmosphere. We present a technique for online measurements of the adsorption of the first few water layers onto insoluble aerosol nanoparticles. Atomized fumed silica nanoparticles were dispersed from aqueous suspension and their hygroscopic growth factors (HGF) and number of the adsorbed water layers at subsaturated conditions were measured using a nanometer hygroscopic tandem differential mobility analyzer (HTDMA). Particle morphology was characterized by electron microscopy and particle density was determined by mobility analysis. The HGFs of the size-selected particles at mobility diameters from 10 to 50 nm at 90% relative humidity (RH) varied from 1.05 to 1.24, corresponding to 2–6 layers of adsorbed water. The morphology of the generated fumed silica nanoparticles varied from spheres at 8–10 nm to agglomerates at larger diameters with effective density from 1.7 to 0.8 g/cm³ and fractal dimension of 2.6. The smallest spheres and agglomerates had the highest HGFs. The smallest particles with diameters of 8 and 10 nm adsorbed two to three water layers in subsaturated conditions, which agreed well with the Frenkel, Halsey, and Hill (FHH) isotherm fitting. In comparison to the small spheres or large agglomerates, the compact agglomerate structure containing a few primary particles increased the number of adsorbed water layers by a factor of ～1.5. This was probably caused by the capillary effect on the small cavities between the primary particles in the agglomerate.     

Investigation of the phase separation of PNIPAM using infrared spectroscopy together with multivariate data analysis

The use of vibrational spectroscopy to investigate complex structural changes in polymers yields chemically rich data, but interpretation can be challenging and subtle but meaningful spectral changes may be missed through visual inspection alone. Multivariate analysis is an efficient approach to gain an oversight of small but systematic spectral differences anywhere within the spectra, providing further insight into structural changes and associated transformation mechanisms. In this study, the novel analytical approach of infrared spectroscopy combined with principal component analysis and Gaussian peak fitting was used to investigate the structural changes in aqueous solutions of a polymer, using poly(N-isopropyl acrylamide) (PNIPAM) in the atactic form and with controlled tacticity as a model system. Subtle spectral changes associated with the dehydration and phase separation upon heating included peak shifts, an area ratio change of the amide I band to the amide II band and formation of a new peak in the amide I band were efficiently detected. Dehydration and phase separation of PNIPAM occurred in two temperature ranges, one for the atactic and one for isotactic rich part, both involving a complex re-organization of the hydrogen bonds and change of the hydration layer. The changes agreed with existing results from other techniques, and new insights were gained into the effect of controlled tacticity on phase transformation behaviour. The study demonstrates that infrared spectroscopy combined with the multivariate analytical method principal component analysis and Gaussian peak fitting is an efficient approach to probing structural change in polymers during heating. The simplicity of the presented approach could find excellent use in analysing and understanding the molecular environment of a range of stimuli-responsive polymers, for instance block or grafted types of polymers, as well as those with controlled tacticity.     

Effect of expandable graphite and ammonium polyphosphate on the thermal degradation and weathering of intumescent fire-retardant coating

This research aims to study the effect of ammonium polyphosphate and expandable graphite on the intumescent coating formulations (ICF). The coating presented in this research article is based on carbon source expandable graphite (EG), blowing agent melamine, acid source ammonium polyphosphate (APP), epoxy resin as a binder with polyamide amine. The stability of the developed coating was verified at 950°C for 1-hour fire test. The results showed that the coating is stable and well bond with the steel substrate. The char was characterized by using FESEM, XRD, FTIR, DTA, TGA, XPS, Py-GCMS and Weathering Test. The morphology of the char was studied by SEM of the coating after furnace fire test. XRD and FTIR show the presence of graphite, borophosphate; boron oxide and sassolite in the residual char. TGA and DTG disclosed that EG improved the residual mass of coating. XPS analysis showed the char residue of IF5-APP-EG contains carbon and oxygen contents 47.50 and 40.70, respectively. Py-GCMS analysis described that the IF5-APP-EG released less gaseous compounds. The weathering test illustrated that's the char expansion of coatings samples was decreased due to the presence of a humid environment and UV light. The IF5-APP-EG showed the maximum char expansion, lower substrate temperature and high residual weight among the studied formulations.