Optimal strategies in the average consensus problem

Let a set of communicating agents compute the average of their initial positions, where every agent is restricted to communicate to a given small number of other agents (average consensus problem). We prove that the optimal topology of communication is given by a de Bruijn graph. Consensus is then reached in finitely many steps. This solution is valid when the number of agents is an exact power of the out-degree of the communication graph. We introduce an algebraic tool, the shifted Kronecker product, and a more general family of strategies, also based on a de Bruijn communication graph. Those strategies are compared to Cayley strategies in terms of the speed of convergence. We also show that quantized communication between the agents still allows finite convergence, to a consensus, which is not in general the average of the initial positions.     

Design of an integrated low-noise read-out system for DNA capacitive sensors

This paper presents an electronic system for a fast DNA label-less detection. The sensitivity of the capacitive sensor in use is improved by depositing an insulating self-assembled monolayer (SAM) over the golden electrodes. The capacitance shift due to the hybridization effect is monitored by means of a charge-sensitive amplifier and digitalized by means of a comparator and a counter. The read-out solution demonstrates the ability to identify a 0.01% variation on the capacitive value of the sensor. Results from measurements with the optimized sensor show the reliability of the electronics. The investigated solution is suitable for monolithic systems or for a micro-fabricated array of sensors. An example of the integrated front-end is described and performances and noise evaluation are reported here.     

Microwave dewaxing applied to the investment casting process

Autoclave processing is commonly used nowadays for dewaxing in the investment casting process. However, since the use of microwave is steadily growing in industrial processes and the wax interacts with the electromagnetic energy of the microwaves, the present work studies the possibility of carrying out dewaxing via microwave. The wax (mineral wax, vegetable resin, low molecular-weight polymer and anti-oxidant) used in this work was prepared by melting in an oven equipped with a mineral oil bath. The chemical and structural stability of the wax were monitored throughout 12 simulated dewaxing cycles, via various analyses, namely, volumetric expansion, hardness, Fourier transform infrared spectroscopy, ultraviolet–visible spectrophotometry, differential scanning calorimetry and viscosity. The results showed that microwave dewaxing is viable, significantly decreasing the incorporation of dirt and water, which is inevitable in the autoclave dewaxing process.     

The impact of different hop compounds on the growth of selected beer spoilage bacteria in beer

Beer spoiling lactic acid bacteria are a major reason for quality complaints in breweries around the world. Spoilage by a variety of these bacteria can result in haze, sediment, slime, off-flavours and acidity. As these bacteria occur frequently in the brewing environment, using certain hop products that inhibit the growth of these spoilers could be a solution to prevent problems. To investigate the impact of seven different hop compounds (α-acids, iso-α-acids, tetrahydro-iso-α-acids, rho-iso-α-acids, xanthohumol, iso-xanthohumol and humulinones) on the growth of six major beer spoilage bacteria (Lactobacillus brevis. L. backi, L. coryniformis, L. lindneri, L. buchneri, Pediococcus damnosous), two concentrations (10 and 25 mg/L) of each hop substance were added to unhopped beer. The potential growth of the spoilage bacteria was investigated over 56 consecutive days. A comparison of the results shows a strong inhibition of growth of all spoilage bacteria at 25 mg/L of tetrahydro-iso-α-acids closely followed by α-acids as the second most inhibitory substance. The results showed a high resistance of L. brevis to all hop compounds as well as an inhibition of L. coryniformis and L. buchneri at low concentrations of most hop components. In comparison with the control sample, L. lindneri showed increased growth in the presence of some hop compounds (rho-iso-α-acids, xanthohumol, iso-xanthohumol, humulinones). © 2020 The Authors. Journal of the Institute of Brewing published by John Wiley & Sons Ltd on behalf of The Institute of Brewing & Distilling     

Multi-Residue Determination of Pesticides in Açai Tropical Fruit (Euterpe oleracea) by Matrix Solid-Phase Dispersion Combined with Liquid Chromatography

An extraction method based on matrix solid phase dispersion was developed to determine bromuconazole, fenbuconazole, parathion-methyl, kresoxim-methyl, and teflubenzuron in açai using liquid chromatography with ultraviolet diode array detector. The best results were obtained using 1.0 g of açai, 3.0 g of neutral alumina as the dispersant sorbent, and cyclohexane/ethyl acetate (1:1, v/v, 20 mL) as an eluting solvent. The method was validated using açai samples fortified with pesticides at three concentration levels (0.25, 0.5, and 1.0 mg kg^?1). Average recoveries (seven replicates) ranged from 66 to 119 %, with relative standard deviations between 1.4 and 20 %. The detection and quantification limits for açai ranged from 0.02 to 0.05 mg kg^?1 and from 0.05 to 0.1 mg kg^?1, respectively.     

Synthesis,characterization and evaluation of phosphorylated resins in the removal of Pb<Superscript>2+</Superscript> from aqueous solutions

Phosphinic-derivative poly(styrene-co-divinylbenzene)-based on PS–DVB copolymers with different porosity degrees have been prepared by aromatic electrophilic substitution reaction using PCl₃/AlCl₃ followed by base-promoted hydrolysis. The phosphorylation reaction was analyzed by infra-red spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetry (TG/DTG). In addition, the phosphorous content of the phosphorylated copolymers was determined by spectrophotometry using the method based on sodium molybdate reactant so that the extension of that modification could be assessed. The performance of the phosphorylated resins in the extraction of Pb²⁺ from aqueous solutions in a batch system was also evaluated. The Pb²⁺ content was determined by atomic absorption spectrometry (AAS). These materials presented excellent extraction capacity under the contact time of 30 min and pH 6.     

Fundamentals and applications of immobilized microfluidic enzymatic reactors

OVERVIEW: Over the last decade, the utility of immobilized microfluidic enzyme reactors (IMERs) has been demonstrated in a wide variety of fields, including medical diagnostics and therapy, biosensors, organic synthesis, drug discovery and many other applications. Of particular interest to the pharmaceutical industry is the potential for high throughput experimentation afforded by these systems, with a view to combinatorial synthesis for drug discovery applications. This article will focus on the current state of IMER systems, including immobilization techniques and microchannel flow generation, with a particular emphasis on applications and future prospects in view of likely directions and market potential of this field. IMPACT: The numerous advantages of attaching enzymes to a solid support, such as reuse of a single batch of enzyme, improved stability and durability, the ability to stop the reaction rapidly by removing the product from the reaction solution and the absence of enzyme contamination of the product are some of the attractive features of such systems. There are, however, a number of issues requiring careful consideration when developing such microsystems, including, but not limited to, surface modifications and exact control of fluid behaviour in microchannels, detection limitations, increased integration, and the reusability of the chips. APPLICATIONS: IMERs have received wide, including commercial, application as diagnostic tools for point‐of‐care applications, and, increasingly, as analytical tools in early drug development. Furthermore, peptide mapping and proteomics have employed IMER systems extensively over the past decade and growth in these areas continues. Copyright © 2011 Society of Chemical Industry     

A One-Dimensional Model for Particulate Deposition and Hydrocarbon Condensation in Exhaust Gas Recirculation Coolers

Cooled exhaust gas recirculation (EGR) is widely used in diesel engines to control engine out NO_x (oxides of nitrogen) emissions. A portion of the exhaust gases is recirculated into the intake manifold of the engine after cooling it through a heat exchanger. EGR cooler heat exchangers, however, tend to lose efficiency and have increased pressure drop as deposit forms on the heat exchanger surface. This adversely affects the combustion process, engine durability, and emissions. In this study, a 1-D model was developed to simulate soot deposition, soot removal, and condensation of several hydrocarbon (HC) species in a circular tube with turbulent gas flow at constant wall temperature. The circular tube, which makes up the computational domain in the model, represents a single channel from any EGR cooler geometry. The model takes into account soot particle deposition due to thermophoresis, diffusion, turbulent impaction, and gravitational drift. However, thermophoresis was found to be the most dominant deposition mechanism for boundary conditions at which EGR coolers typically operate. Soot removal was modeled by considering a force balance between the drag and van der Waals forces. A lognormal distribution of particles was assumed at the tube inlet. The evolution of the particle distribution in the bulk flow along the tube as well as the mass distribution in the deposit layer on the tube walls is predicted by the model. Condensation of six HC species between C₁₅-C₂₄ alkanes was also modeled. Predictions made by the model are in reasonably good agreement with experimental data obtained from a laboratory reactor under the same boundary conditions. There are several assumptions and simplifications built into the model, which can be refined further to improve it.

Copyright 2012 American Association for Aerosol Research     

Forest‐based resources as fillers in biobased polyurethane foams

Six fillers from forestry wastes (wood, bark, cones and needles from young pine trees, kraft lignin, and recycled paper sludge from industry wastes) were incorporated into polyurethane (PU)‐based foams prepared via free‐rise pouring method. Variable filler contents (1, 5, and 10 wt %) and NCO/OH ratios (0.6, 0.9, and 1.2) were investigated. A simple mixture (1:3) of castor oil and crude glycerin (byproduct from biodiesel production) was used as biobased polyol. The foam composites were investigated through spectroscopy, morphological, mechanical, and hygroscopic analyses. The addition of fillers decreased water uptake and yielded rigid PU systems with more homogenous cell structure. The 1% and 5% reinforcement wood were the most effective among the studied compositions, with better mechanical and hygroscopic performance, probably due the higher compatibility of the wood with the PU system, which promote urethanic bonds between filler and isocyanate, as indicated by wet chemical results and micrographs. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45684.