Novel Diffusion‐Barrier Materials Against Oxygen for High‐Density Dynamic Random Access Memory Capacitors

A new design concept for diffusion barriers in high‐density memory capacitors is suggested, and both RuTiN (RTN) and RuTiO (RTO) films are proposed as sacrificial oxygen diffusion barriers. The newly developed RTN and RTO barriers show a much lower sheet resistance than various other barriers, including binary and ternary nitrides (reported by others), up to 800 °C, without a large increase in the resistance. For both the Pt/RTN/TiSi_x/n⁺⁺poly‐plug/n⁺ channel layer/Si and the Pt/RTO/RTN/TiSi_x/n⁺⁺poly‐plug/n⁺ channel layer/Si contact structures, contact resistance—the most important electrical parameter for the diffusion barrier in the bottom electrode structure of capacitors—was found to be as low as 5 kohm, even after annealing up to 750 °C. When the RTN film was inserted as a glue layer between the bottom Pt electrode layer and the TiN barrier film in the chemical vapor deposited (Ba,Sr)TiO₃ (CVD–BST) simple stack‐type structure, the RTN glue layer was observed to be thermally stable to temperatures 150 °C higher than that to which the TiN glue layer is stable. Moreover, the capacitance of the physical vapor deposited (PVD)–BST simple stack‐type structure adopted TiN glue layer initially degraded after annealing at 500 °C, and, thereafter, completely failed. In the case of the RTN and RTO/RTN glue layers, however, the capacitance continuously increased up to 550 °C. Thus, the new RTN and RTO films, which act as diffusion barriers to oxygen, are very promising materials for achieving high‐density capacitors.     

Syndrome: a light‐weight approach to improving TCP performance in mobile wireless networks

It is well known that the performance of TCP deteriorates in a mobile wireless environment. This is due to the fact that although the majority of packet losses are results of transmission errors over the wireless links, TCP senders still take packet loss as an indication of congestion, and adjust their congestion windows according to the additive increase and multiplicative decrease (AIMD) algorithm. As a result, the throughput attained by TCP connections in the wireless environment is much less than it should be. The key problem that leads to the performance degradation is that TCP senders are unable to distinguish whether packet loss is a result of congestion in the wireline network or transmission errors on the wireless links. In this paper, we propose a light‐weight approach, called syndrome, to improving TCP performance in mobile wireless environments. In syndrome, the BS simply counts, for each TCP connection, the number of packets that it relays to the destination host so far, and attaches this number in the TCP header. Based on the combination of the TCP sequence number and the BS‐attached number and a solid theoretical base, the destination host will be able to tell where (on the wireline or wireless networks) packet loss (if any) occurs, and notify TCP senders (via explicit loss notification, ELN) to take appropriate actions. If packet loss is a result of transmission errors on the wireless link, the sender does not have to reduce its congestion window. Syndrome is grounded on a rigorous, analytic foundation, does not require the base station to buffer packets or keep an enormous amount of states, and can be easily incorporated into the current protocol stack as a software patch. Through simulation studies in ns‐2 (UCB, LBNL, VINT network simulator, http://www‐mash.cs.berkeley.edu/ns/ ), we also show that syndrome significantly improves the TCP performance in wireless environments and the performance gain is comparable to the heavy‐weight SNOOP approach (either with local retransmission or with ELN) that requires the base station to buffer, in the worst case, a window worth of packets or states. Copyright © 2001 John Wiley & Sons, Ltd.     

用于先进PCB制造工艺的叠层封装

在20世纪90年代,球栅阵列封装(BGA)和芯片尺寸封装(CSP)在封装材料和加工工艺方面达到了极限。这2种技术如同20世纪80年代的表面安装器件(SMD)和70年代通孔安装器件(THD)一样,在电学、机械、热性能、尺寸、质量和可靠性方面达到最大值。目前,三维封装正在成为用于未来采用的先进印制板(PCB)制造工艺的下一个阶段。它们可以分为圆片级封装、芯片级封装、和封装面。叠层封装(PoP)是一种封装面叠层封装类型的三维封装技术[15]。     

Gallium gradients in Cu(In,Ga)Se2 thin‐film solar cells

The gallium gradient in Cu(In,Ga)Se₂ (CIGS) layers, which forms during the two industrially relevant deposition routes, the sequential and co‐evaporation processes, plays a key role in the device performance of CIGS thin‐film modules. In this contribution, we present a comprehensive study on the formation, nature, and consequences of gallium gradients in CIGS solar cells. The formation of gallium gradients is analyzed in real time during a rapid selenization process by in situ X‐ray measurements. In addition, the gallium grading of a CIGS layer grown with an in‐line co‐evaporation process is analyzed by means of depth profiling with mass spectrometry. This gallium gradient of a real solar cell served as input data for device simulations. Depth‐dependent occurrence of lateral inhomogeneities on the µm scale in CIGS deposited by the co‐evaporation process was investigated by highly spatially resolved luminescence measurements on etched CIGS samples, which revealed a dependence of the optical bandgap, the quasi‐Fermi level splitting, transition levels, and the vertical gallium gradient. Transmission electron microscopy analyses of CIGS cross‐sections point to a difference in gallium content in the near surface region of neighboring grains. Migration barriers for a copper‐vacancy‐mediated indium and gallium diffusion in CuInSe₂ and CuGaSe₂ were calculated using density functional theory. The migration barrier for the In_Cu antisite in CuGaSe₂ is significantly lower compared with the Ga_Cu antisite in CuInSe₂, which is in accordance with the experimentally observed Ga gradients in CIGS layers grown by co‐evaporation and selenization processes. Copyright © 2014 John Wiley & Sons, Ltd.     

Narrow‐band interference suppression in wavelet packets based multicarrier multicode CDMA overlay system

The wavelet packets based multicarrier (MC) multicode (MCD) code‐division multiple‐access (CDMA) transceiver consists of the MCD part, which ensures the transmission for high speed and flexible data rate; the MC part contributing to robustness to frequency‐selective fading and flexibility for handling multiple data rates; and wavelet packets (WPs) modulation technique, which contributes to the mitigation of the interference problems. As WPs have lower sidelobes compared with sinusoidal carriers, this system is very effective in reducing the problem of inter‐carrier interference. Of course, like any CDMA system, the system can suppress a given amount of interference. This paper considers an interference suppression scheme which will enhance the performance of the system. The receiver employs suppression filters to mitigate the effect of narrow‐band jammer interference. The framework for the system and the performance evaluation are presented in terms of the bit error rate and the outage probability over a Nakagami fading channel. Also, we investigate how the performance is influenced by various parameters, such as the number of taps of the suppression filter and the ratio of narrow‐band interference bandwidth to the spread‐spectrum bandwidth. Finally, the performance of the system is compared with the performance of sinusoidal based MC/MCD‐CDMA system denoted Sin‐MC/MCD‐CDMA. Copyright © 2012 John Wiley & Sons, Ltd.     

Performance analysis of cooperative spatial multiplexing networks with AF/DF relaying and linear receiver over Rayleigh fading channels

Cooperative spatial multiplexing (CSM) system has played an important role in wireless networks by offering a substantial improvement in multiplexing gain compared with its cooperative diversity counterpart. However, there is a limited number of research works that consider the performance of CSM systems. As such, in this paper, we have derived exact performance of CSM with amplify‐and‐forward and decode‐and‐forward relays in terms of outage capacity and ergodic capacity. We have shown that CSM systems yield a unity diversity order regardless of the number of antennas at the destination and the number of relays in the networks, which is the direct result of diversity and multiplexing gain trade‐off. Our analytical expressions are corroborated by Monte‐Carlo simulations. Copyright © 2013 John Wiley & Sons, Ltd.     

Routing Protocol for Heterogeneous Hierarchical Wireless Multimedia Sensor Networks

Recently, wireless multimedia sensor networks (WMSNs) have emerged as one of the most important technologies, driven by the development of powerful multimedia device such as CMOS. WMSNs require several factors such as resource constraints, specific QoS, high bandwidth and so on. In this paper, we propose a hierarchical heterogeneous network model based routing protocol for WMSNs. In our proposal, proposed network model is classified into monitoring class, delivery class and aggregation class. Also we define two kinds of the routing path in order to ensure bandwidth and QoS. In simulation results, we illustrate the performance of our proposal.     

New Type of 2-D Laser Doppler Vibrometer

The fundamentals and method of 2-D laser Doppler vibrometer are introduced.The factors influencing the measuring accuracy are analyzed.Moreover,the circuit for signal processing is designed.The vibrating amplitude and frequency of 2-D vibration in wider range can be measured simultaneously in non-contact means,the measuring results are accurate.     

Microstructure control of copper films by the addition of molybdenum in an advanced metallization process

The effect of annealing on the resistivity, morphology, microstructure, and diffusion characteristics of Cu(Mo)/SiO₂/Si and Ti/Cu(Mo)/SiO₂/Si multilayer films has been investigated in order to deterine the role of Mo. In the case of a Cu(Mo)/SiO₂/Si multilayer, most of the Mo diffused out to the free surface to form MoO₃ at temperatures up to 500 C, and complete dissociation of Mo occurred at higher temperatures. The segregation of Mo to the external surface leads to Mo-free Cu films with extensive grain growth up to 20 times the original grain size and strong (111) texture. In the case of a Ti/Cu(Mo)/SiO₂/Si multilayer, a thin Ti film prohibits Cu agglomeration, out-diffusion of Mo, and diffusion of Cu into SiO₂ at temperatures up to 750 C. Cu(Mo) grain growth was less extensive, but (111) fiber texturing was much stronger than in the case of Cu(Mo)/SiO₂/Si. In the current study, significant changes in microstructure, such as a strong (111) texture and abnormal grain growth, have been obtained by adding Mo to Cu films when the films are annealed.     

An investigation of the importance of myocardial anisotropy infinite-element modeling of the heart: methodology and application to theestimation of defibrillation efficacy

Finite-element (FE) modeling has been widely used in studies of bioelectric phenomena of tissues, including ventricular defibrillation. Most FE models, whether built from anatomical atlases or subject-specific tomographic images, treat the myocardium as an isotropic tissue. However, myocardium has been experimentally shown to have significant anisotropy in its resistivities, although myocardial fiber directions are difficult to measure on a subject-specific basis. In this paper, we: 1). propose a method to incorporate a widely known myocardial fiber direction model to a specific individual and 2). assess the effects of myocardial anisotropy on myocardial voltage gradients computed for a study of implantable defibrillators. The thoracic FE model was built from CT images of a young pig, and the myocardial fiber structures were incorporated via elastic mapping. Our results demonstrate a good mapping of geometry between the source and target hearts with an average root-mean-square error of less than 2.3 mm and a mapped fiber pattern similar to those known to exist in vivo. With the mapped fiber information, we showed that the estimated minimal myocardial voltage gradient over 80% of the myocardium differs by less than 10% between using an isotropic and anisotropic myocardial models. Thus, myocardial anisotropy is expected to have only a small effect on estimates of defibrillation threshold obtained from computed voltage gradients. On the other hand, anisotropy may be essential if defibrillation efficacy is analyzed by transmembrane voltage of the myocardial cells.