Logical and diversity combining in FH/SSMA packet radio networks

We propose the logical and diversity combining in slotted frequency-hopped spread spectrum multiple access (FH/SSMA) packet radio networks. The proposed diversity scheme employs the symbol-by-symbol logical AND operation between the currently received packet and the previously combined packet. Our results show that the proposed low-complexity diversity combining scheme provides a significant performance improvement over existing diversity combining schemes     

Different Directions of Switching of Chromium Oxide Thin Films

We have investigated the switching behavior of as-deposited CrO _x and post-annealed CrO _y films by use of a variety of electrodes (top electrode Ag, Ti; bottom electrode Pt, fluorine tin oxide (FTO)). Resistance switching is highly dependent on electrode material and post-annealing treatment. Among Pt devices, I–V hysteresis was observed for the Ag/CrO _x /Pt device only; no resistance switching was observed for Ag/CrO _y /Pt, Ti/CrO _x /Pt, and Ti/CrO _y /Pt devices. Among FTO devices, I–V hysteresis was observed for the Ag/CrO _x /FTO device whereas I–V hysteresis with the opposite switching direction was observed for Ag/CrO _y /FTO, Ti/CrO _x /FTO, and Ti/CrO _y /FTO devices. The direction of switching depends not only on electrode material but also on post-annealing treatment, which affects the density of grain boundaries. Thus, the density of grain boundaries determines the type of charge carrier involved in the switching process. For as-deposited CrO _x films with a high density of grain boundaries Ag filament paths mediated by electrochemical redox reaction were observed, irrespective of bottom electrode material (Pt or FTO). Post-annealed CrO _y films with a low density of grain boundaries suppressed electrochemical redox reaction in the Ag/CrO _y /Pt device but promoted short-range movement of O^2? ions through the bottom interface, resulting in resistance switching in the Ag/CrO _y /FTO device. Electrochemical redox reaction-controlled resistance switching occurred solely in oxides with a high density of grain boundaries or dislocations.     

Relationship between HOMO energy level and open circuit voltage of polymer solar cells

A series of π-conjugated polymers (PDHF-BT and PDHF-TBT) with 4-(3,4-ethylenedioxythienyl)-2,1,3-benzothiadiazole (BT), 4,7-bis(3,4-ethylenedioxythienyl)-2,1,3-benzothiadiazole (TBT), and 9,9′-dihexylfluorene were synthesized by the Suzuki coupling reaction. The HOMO energy level of PDHF-BT was −5.47 eV, which was lower than that of PDHF-TBT (−5.22 eV), while the LUMO energy level of PDHF-BT (−3.45 eV) was very similar to that of PDHF-TBT (−3.42 eV). These energy levels of PDHF-BT and PDHF-TBT were also supported by a DFT calculation. The power conversion efficiency (PCE) of the polymer solar cell (PSC) with a structure of ITO/PEDOT:PSS/PDHF-BT:PCBM (1:1)/Al was determined as 0.34% and it was larger than that of the device based on PDHF-TBT (0.22%). Correspondingly, the V_oc of the PSC based on PDHF-BT (0.71 V) was much larger than that of the device based on PDHF-TBT (0.40 V). The results support that the V_oc of polymer based PSCs is strongly related to the HOMO energy level of the active polymers.     

Compact Circularly Polarized Antenna with a Capacitive Feed for GPS/GLONASS Applications

This letter presents a novel compact circularly polarized patch antenna for Global Positioning System/Global Navigation Satellite System (GPS/GLONASS) applications. The proposed antenna is composed of a simple square radiating patch fed by a capacitive dual‐feeder to increase the impedance bandwidth and a lumped element hybrid coupler to achieve the broadband characteristic of the axial ratio (AR). The realized antenna dimensions are 28 mm × 28 mm × 4 mm, which is the most compact size among the dual‐band GPS/GLONASS antennas reported to date. The measured results demonstrate that the proposed antenna has a gain of 2.5 dBi to 4.2 dBi and an AR of 0.41 dB to 1.51 dB over the GPS/GLONASS L1 band (1.575 GHz to 1.61 GHz).     

背入射Al_(0.42)Ga_(0.58)N/Al_(0.40)Ga_(0.60)N异质结p-i-n太阳光盲紫外探测器

在蓝宝石上用MOCVD生长的材料制备了背入射Al0.42Ga0.58N/Al0.40Ga0.60N异质结p-I-n太阳光盲紫外探测器.从器件的正向Ⅰ-Ⅴ特性曲线计算了理想因子n与串联电阻Rs分别为3和93?器件在零偏压下275nm峰值波长处的外量子效率与探测率分别为9%和4.98×1011cm·Hz1/2/W,分析表明Al0.42Ga0.58N窗口层在275nm波长处的透过率仅为15.7%,是器件外量子效率和探测率偏低的原因之一.     

An Intelligent Product Recommendation Model to Reflect the Recent Purchasing Patterns of Customers

Mobile Networks and Applications - This study suggests a new product recommendation model to reflect the recent purchasing patterns of customers. There are many methods to measure the similarity...     

Highly Stretchable or Transparent Conductor Fabrication by a Hierarchical Multiscale Hybrid Nanocomposite

As is frequently seen in sci‐fi movies, future electronics are expected to ultimately be in the form of wearable electronics. To realize wearable electronics, the electric components should be soft, flexible, and even stretchable to be human‐friendly. An important step is presented toward realization of wearable electronics by developing a hierarchical multiscale hybrid nanocomposite for highly flexible, stretchable, or transparent conductors. The hybrid nanocomposite combines the enhanced mechanical compliance, electrical conductivity, and optical transparency of small CNTs (d ≈ 1.2 nm) and the enhanced electrical conductivity of relatively bigger Ag nanowire (d ≈ 150 nm) backbone to provide efficient multiscale electron transport path with Ag nanowire current backbone collector and local CNT percolation network. The highly elastic hybrid nanocomposite conductors and highly transparent flexible conductors can be mounted on any non‐planar or soft surfaces to realize human‐friendly electronics interface for future wearable electronics.