Reliable Wavelength-Division-Multiplexed Passive Optical Network Using Novel Protection Scheme

A novel, reliable wavelength-division-multiplexed passive optical network (WDM-PON) with self-protection capability is proposed. By utilizing the routing characteristics of N x N arrayed waveguide grating, the proposed architecture can provide automatic protection against any fiber cut between central office and optical network unit (ONU). Compared with the conventional schemes, this scheme adopts colorless ONUs, thus leading to a decrease in the costs of operation, administration, and maintenance, as well as the production cost. Without the performance degradation, the proposed WDM-PON scheme can offer a reliable network service. In the experiment, the protection performance was demonstrated in the carrier-distributed 1.25-Gb/s WDM transmission over 20-km single-mode fiber.     

Design and Fabrication of Asymmetric MOSFETs Using a Novel Self-Aligned Structure

A novel asymmetric MOSFET with no lightly doped drain on the source side is simulated on bulk Si using a device simulator (SILVACO). To overcome the problems of the conventional asymmetric process, a novel asymmetric MOSFET using a mesa structure and a sidewall spacer gate is proposed, and it provides a self-alignment process, aggressive scaling, and better uniformity. First of all, we have compared the simulated characteristics of the asymmetric and symmetric MOSFETs. Basically, both asymmetric and symmetric MOSFETs have an n-type channel and the same physical parameters. Compared with the symmetric MOSFET, the asymmetric MOSFET shows better device performance. Moreover, we have successfully fabricated 50-nm asymmetric NMOSFETs based on simulation results and investigated its operation and characteristics.     

A low-noise L-band EDFA with a 1500-nm Raman-pumped dispersion-compensating fiber section

This report presents a low-noise L-band erbium-doped fiber amplifier (EDFA) with a dispersion-compensating Raman amplifier. With an optimized prestage and 1500-nm Raman-pump laser diodes, the proposed EDFA achieved an internal noise figure of less than 4.5 dB over a 33-nm flat gain bandwidth within 0.5 dB at -2 dBm of large signal input power.     

Self‐Healing Reduced Graphene Oxide Films by Supersonic Kinetic Spraying

The industrial scale application of graphene and other functional materials in the field of electronics has been limited by inherent defects, and the lack of simple deposition methods. A simple spray deposition method is developed that uses a supersonic air jet for a commercially available reduced graphene oxide (r‐GO) suspension. The r‐GO flakes are used as received, which are pre‐annealed and pre‐hydrazine‐treated, and do not undergo any post‐treatment. A part of the considerable kinetic energy of the r‐GO flakes entrained by the supersonic jet is used in stretching the flakes upon impact with the substrate. The resulting “frozen elastic strains” heal the defects (topological defects, namely Stone‐Wales defect and C₂ vacancies) in the r‐GO flakes, which is reflected in the reduced ratio of the intensities of the D and G bands in the deposited film. The defects can also be regenerated by annealing.     

Template‐Based Reconstruction of Surface Mesh Animation from Point Cloud Animation

In this paper, we present a method for reconstructing a surface mesh animation sequence from point cloud animation data. We mainly focus on the articulated body of a subject — the motion of which can be roughly described by its internal skeletal structure. The point cloud data is assumed to be captured independently without any inter‐frame correspondence information. Using a template model that resembles the given subject, our basic idea for reconstructing the mesh animation is to deform the template model to fit to the point cloud (on a frame‐by‐frame basis) while maintaining inter‐frame coherence. We first estimate the skeletal motion from the point cloud data. After applying the skeletal motion to the template surface, we refine it to fit to the point cloud data. We demonstrate the viability of the method by applying it to reconstruct a fast dancing motion     

Single, Depolarized, CW Supercontinuum-Based Wavelength-Division-Multiplexed Passive Optical Network Architecture With C-Band OLT, L-Band ONU, and U-Band Monitoring

We propose and experimentally demonstrate a novel bidirectional wavelength-division-multiplexed passive optical network architecture that fully utilizes the superior optical properties of an incoherent continuous-wave (CW) supercontinuum (SC) source. The proposed architecture, which incorporates low-cost Fabry-Perot laser diodes that have been wavelength locked by spectrum-sliced beams from a depolarized 130-nm-bandwidth CW SC source, is based on a unique wavelength band allocation scheme of the C-band for an optical line terminal (OLT), the L-band for optical network units (ONUs), and the U-band for channel monitoring. A cost-effective network that features a single broadband source at the OLT, and no additional wavelength- band-selective monitoring beam reflector at each ONU can be readily achieved. The experimental demonstration presented in this paper is carried out at a data rate of 622 Mb/s over a 25-km standard single-mode fiber.     

Well‐Defined Functional Linear Aliphatic Diblock Copolyethers: A Versatile Linear Aliphatic Polyether Platform for Selective Functionalizations and Various Nanostructures

Low‐temperature anionic ring‐opening homopolymerizations and copolymerizations of two glycidol derivatives (allyl glycidyl ether (AGE) and ethoxyethyl glycidyl ether (EEGE)) are studied using a metal‐free catalyst system, 3‐phenyl‐1‐propanol (PPA) (an initiator) and 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris‐(dimethylamino)phosphoranylidenamino]‐2Λ⁵,4Λ⁵‐catenadi(phosphazene) (t‐Bu‐P₄) (a promoter) in order to obtain well‐defined functional linear polyethers and diblock copolymers. With the aid of the catalyst system, AGE is found to successfully undergo anionic ring‐opening polymerization (ROP) even at room temperature (low reaction temperature) without any side reactions, producing well‐defined linear AGE‐homopolymer in a unimodal narrow molecular weight distribution. Under the same conditions, EEGE also undergoes polymerization, producing a linear EEGE‐homopolymer in a unimodal narrow molecular‐weight distribution. In this case, however, a side reaction (i.e., chain‐transfer reaction) is found to occur at low levels during the early stages of polymerization. The chemical properties of the monomers in the context of the homopolymerization reactions are considered in the design of a protocol used to synthesize well‐defined linear diblock copolyethers with a variety of compositions. The approach, anionic polymerization via the sequential step feed of AGE and EEGE as the first and second monomers, is found to be free from side reactions at room temperature. Each block of the obtained linear diblock copolymers undergoes selective deprotection to permit further chemical modification for selective functionalization. In addition, thermal properties and structures of the polymers and their post‐modification products are examined. Overall, this study demonstrates that a low‐temperature metal‐free anionic ROP using the PPA/t‐Bu‐P₄ catalyst system is suitable for the production of well‐defined linear AGE‐homopolymers and their diblock copolymers with the EEGE monomer, which are versatile and selectively functionalizable linear aliphatic polyether platforms for a variety of post‐modifications, nanostructures, and their applications.     

CdSe-sensitized inorganic–organic heterojunction solar cells: The effect of molecular dipole interface modification and surface passivation

CdSe-sensitized heterojunction solar cells composed of mesoscopic TiO₂/CdSe/P3HT (poly-3-hexylthiophene) were constructed, and the negative molecular dipole of 4-methoxybenzenethiol (MBT) and the ZnS passivation layer were used as interface modifiers to improve device performance. Through the interface modification between TiO₂/CdSe and P3HT using MBT and by ZnS surface passivation, the power conversion efficiency of the modified solar cell was greatly enhanced from 1.02% to 1.62% under 1 sun illumination.     

Ag/Ni Metallization Bilayer: A Functional Layer for Highly Efficient Polycrystalline SnSe Thermoelectric Modules

The structural and electrical characteristics of Ag/Ni bilayer metallization on polycrystalline thermoelectric SnSe were investigated. Two difficulties with thermoelectric SnSe metallization were identified for Ag and Ni single layers: Sn diffusion into the Ag metallization layer and unexpected cracks in the Ni metallization layer. The proposed Ag/Ni bilayer was prepared by hot-pressing, demonstrating successful metallization on the SnSe surface without interfacial cracks or elemental penetration into the metallization layer. Structural analysis revealed that the Ni layer reacts with SnSe, forming several crystalline phases during metallization that are beneficial for reducing contact resistance. Detailed investigation of the Ni/SnSe interface layer confirms columnar Ni-Sn intermetallic phases [(Ni₃Sn and Ni₃Sn₂) and Ni_5.63SnSe₂] that suppress Sn diffusion into the Ag layer. Electrical specific-contact resistivity (5.32 × 10^?4 Ω cm²) of the Ag/Ni bilayer requires further modification for development of high-efficiency polycrystalline SnSe thermoelectric modules.